Abstract
The present paper presents a boundary element analysis of penny-shaped crack problems in two joined transversely isotropic solids. The boundary element analysis is carried out by incorporating the fundamental singular solution for a concentrated point load in a transversely isotropic bi-material solid of infinite space into the conventional displacement boundary integral equations. The conventional multi-region method is used to analyze the crack problems. The traction-singular elements are employed to capture the singularity around the crack front. The values of the stress intensity factors are obtained by using crack opening displacements. The numerical scheme results are verified with the closed-form solutions available in the literature for a penny-shaped crack parallel to the plane of the isotropy of a homogeneous and transversely isotropic solid of infinite extent. The new problem of a penny-shaped crack perpendicular to the interface of a transversely isotropic bi-material solid is then examined in detail. The crack surfaces are subject to the three normal tractions and the uniform shear traction. The associated stress intensity factor values are obtained and analyzed. The present results can be used for the prediction of the stability of composite structures and the hydraulic fracturing in deep rock strata and reservoir engineering.
Similar content being viewed by others
References
Aliabadi MH (1997) Boundary element formulations in fracture mechanics. ASME Appl Mech Rev 1997, 50:83–96
Ariza MP, Dominguez J (2004) Boundary element formulation for 3D transversely isotropic cracked bodies. Int J Numer Meth Eng 60:719–753
Kassir MK, Sih GC (1968) Three-dimensional stresses around elliptical cracks in transversely isotropic solids. Eng Fract Mech 1:327–345
Kassir MK, Sih GC (1975) Three-dimensional crack problems. Noordhoff International Publishing, pp. 336–381
Sih GC, Chen EP (1981) Cracks in composites. Martinus Nijhoff Publishers
Lin W, Keer LM (1989) Three-dimensional analysis of cracks in layered transversely isotropic media. Proceedings of Royal Society (London) A424:307–322
Jia ZH, Shippy DJ, Rizzo FJ (1989) Three-dimensional crack analysis using singular boundary elements. Int J Numer Meth Eng 28:2257–2273
Kou CH, Keer LM (1995) Three-dimensional analysis of cracking in a multilayered composite. ASME J Appl Mech 62:273–281
Kassir MK, Sih GC (1966) Three-dimensional stress distribution around an elliptical crack under arbitrary loadings. ASME J Appl Mech. 33:601–611
Luchi ML, Rizzuti S (1987) Boundary elements of for three-dimensional elastic crack analysis. Int J Numer Meth Eng 24:2253–2271
Mura T (1982) Micromechanics of defects in solids. The Hague: Martinus Nijhoff
Hoeing A (1978) The behavior of a flat elliptical crack in an anisotropic elastic body. Int J Solids Struct 14:925–934
Ozturk M, Erdogan F (1996) Axisymmetric crack problem in bonded materials with a nonhomogenous interfacial region. Int J Solids Struct 33:4101–4117
Pan E, Amadei B (1999) Boundary element analysis of fracture mechanics in anisotropic bimaterials. Eng Anal Bound Elem 23:683–691
Pan E, Yuan FG (2000) Boundary element analysis of three-dimensional cracks in anisotropic solids. Int J Numer Meth Eng 48:211–237
Pan YC, Chou TW (1976) Point force solution for an infinite transversely isotropic solid. ASME J Appl Mech 43:608–612
Saez A, Ariza, Dominguez J (1997) Three-dimensional fracture analysis in transversely isotropic solids. Eng Anal Bound Elem 20:287–298
Sih GC, Paris PC, Irwin GR (1965) On crack in rectilinearly anisotropic bodies. Int J Fract 1:189–203
Suo Z (1990) Singularities, interfaces and cracks in dissimilar anisotropic media. Proceedings of Royal Society (London) A427:331–358
Sollero P, Aliabadi MH (1993) Fracture mechanics analysis of anisotropic composite laminates by the boundary element method. Int J Frac 64:269–284
Sollero P, Aliabadi MH (1995) Anisotropic analysis of cracks in composite laminates using the dual boundary element method. Composite Struct 31:229–234
Tan CL, Gao YL (1992) Boundary integral equation fracture mechanics analysis of plane orthotropic bodies. Int J Frac 53:343–365
Ting TCT (1996) Anisotropic elasticity: theory and applications. New York: Oxford University Press
Xiao HT, Yue ZQ, Tham LG, Chen YR (2005) Stress intensity factors for penny-shaped cracks perpendicular to graded interfacial zone of bonded bi-materials. Eng Frac Mech. 72:121–143
Yang B (2002) Examination of free-edge crack nucleation around an open hole in composite laminates. Int J Frac 115:173–191
Yue ZQ (1995) Elastic fields in two joined transversely isotropic solids due to concentrated forces. Int J Eng Sci 33:351–369
Yue ZQ, Xiao HT (2002) Generalized Kelvin solution based boundary element method for crack problems in multilayered solids. Eng Anal Bound Elem 26: 691–705
Yue ZQ, Xiao HT, Tham LG (2003) Boundary element analysis of crack problems in functionally graded materials. Int J Solids Struct 40:3273–3291
Zhang ZG, Mai YW (1989) A simple solution for the stress intensity factor of a flat elliptical crack in a transversely isotropic solid. Eng Frac Mech 34:645–648
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Yue, Z.Q., Xiao, H.T., Tham, L.G. et al. Boundary element analysis of three-dimensional crack problems in two joined transversely isotropic solids. Comput Mech 36, 459–474 (2005). https://doi.org/10.1007/s00466-005-0681-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00466-005-0681-6