Abstract
Composite plates are designed in order to maximize the performance with respect to eigenfrequencies. The plates are considered to be laminates where the individual plies consist of orthotropic material. The design task is the orientation of the orthotropic material in each element of the discretization and the ratio between the amounts of material put in the two directions of the fiber-net. The optimizations are performed using the finite element method for analysis and the optimization approach is a two-step method. In the first step we first find the best design on the basis of a recursive optimization procedure based on an optimality criterion (OC). In the second step mathematical programming (MP) and sensitivity analysis are applied to find the final optimized design.
Similar content being viewed by others
References
Abrete S (1994) Optimal design of laminated plates and shells. Compos Struct 29:269–286
Bathe KJ (1996) Finite Element Procedures. Prentice-Hall, New Jersey, USA 2nd edn
Bendsøe MP, Sigmund O (2003) Topology optimization, theory, methods and applications. Springer, Berlin Heidelberg, Germany
Bert CW (1977) Optimal design of a composite-material plate to maximize its fundamental frequency. J. Sound Vib 50:229–239
Diaz AR, Lipton R, Soto CA (1995) A new formulation of the problem of optimum reinforcement of reissner-mindlin plates. Comput Method Appl Mech Eng 123:121–139
Duffy KJ, Adali S (1991) Optimal fibre orientation of antisymmetric hybrid laminates for maximum fundamental frequency and freqency separation. J Sound Vib 146(2):181–190
Grenestedt JL (1989) Layup optimization and sensitivity analysis of the fundamental eigenfrequency of composite plates. Compos Struct 12:193–209
Hammer VB (1999) Optimal laminate design subject to single membrane loads. Struct Optimization 17(1):65–73
Hammer VB, Bendsøe MP, Lipton R, Pedersen P (1997) Parametrization in laminate design for optimal compliance. Int J Solids Struct 34(4):415–434
Lund E, Stegmann J (2005) On structural optimization of composite shell structures using a discrete constitutive parametrization. Wind Energy 8(1):109–124
Luo JH, Gea HC (1998) Optimal bead orientation of 3d shell/plate structures. Finite Elem Anal Des 31:55–71
Nshanian YS, Pappas M (1983) Optimal laminated composite shells for buckling and vibration. AIAA J 21(5):430–437
Olhoff N (1977) Maximizing higher order eigenfrequencies of beams with constraints on the design geometry. J Struct Mech 5(2):107–134
Olhoff N (1989) Multicriterion structural optimization via bound formulation and mathematical programming. Struct Optimization 1(1):11–17
Olhoff N, Parbery R (1984) Designing vibrating beams and rotating shafts for maximum difference between adjacent natural frequencies. Int J Solids Struct 20(1):63–75
Pedersen NL (2005) Designing plates for minimum internal resonance. Struct Multidisc Optim (accepted)
Pedersen NL, Nielsen AK (2003) Optimization of practical trusses with constraints on eigenfrequencies, displacements, stresses and buckling. Struct Multidisc Optimization 25(5–6):436–445
Pedersen P (1989) On optimal orientation of orthotropic materials. Struct Optimization 1:101–106
Pedersen P (1990) Bounds on elastic energy in solids of orthotropic materials. Struct Optimization 2:55–63
Pedersen P (1995) Simple transformation by proper contracted forms. Comm Numer Meth Eng, 11:821–829
Pedersen P, Pedersen NL (2005) An optimality criterion for shape optimization in eigenfrequency problems. Struct Multidisc Optimization (online)
Rand RA, Shen CN (1973) Optimum design of composite shells subject to natural frequency constraints. Comput Struct 3:247–263
Reddy JN (2004) Mechanics of laminated composite plates and shells. CRC Press, Boca Raton London New York Washington D.C.
Seyranian AP, Lund E, Olhoff N (1994) Multiple eigenvalues in structural optimization problems. Struct Optimization 8(4):207–227
Svanberg K (1987) The method of moving asymptotes - a new method for structural optimization. Int J Numer Meth Eng 24:359–373
Thomsen J (1991) Optimization of composite discs. Struct Optimization 3(2):89–98
Thomsen J, Olhoff N (1990) Optimization of fiber orientation and concentration in composites. Control Cyber 19(3-4):327–341
Wittrick WH (1962) Rates of change of eigenvalues, with reference to buckling and vibration problems. J R Aeronaut Soc 66:590–591
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Pedersen, N.L. On design of fiber-nets and orientation for eigenfrequency optimization of plates. Comput Mech 39, 1–13 (2006). https://doi.org/10.1007/s00466-005-0002-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00466-005-0002-0