Abstract
A new method is proposed for effective analysis of laminated plates incorporating accurate through-the-thickness distribution of displacements, strains and stresses in the finite element formulation. It is a two-step analysis procedure. In the first step, displacements are obtained using a post-processing procedure based on the three-dimensional stress equilibrium equations and the thermoelasticity equations, from the results of FSDT finite element analysis. In the second step, the higher-order through-the-thickness distribution of displacements are reflected on the subsequent finite element analysis. The effectiveness of the present approach for the analysis of laminated plates is shown by numerical examples.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 13 September 2001 / Accepted: 23 May 2002
Rights and permissions
About this article
Cite this article
Park, J., Kim, Y. Re-analysis procedure for laminated plates using FSDT finite element model. Computational Mechanics 29, 226–242 (2002). https://doi.org/10.1007/s00466-002-0336-9
Issue Date:
DOI: https://doi.org/10.1007/s00466-002-0336-9