Abstract
Online biomass estimation for bioprocess supervision and control purposes is addressed. As the biomass concentration cannot be measured online during the production to sufficient accuracy, indirect measurement techniques are required. Here we compare several possibilities for the concrete case of recombinant protein production with genetically modified Escherichia coli bacteria and perform a ranking. At normal process operation, the best estimates can be obtained with artificial neural networks (ANNs). When they cannot be employed, statistical correlation techniques can be used such as multivariate regression techniques. Simple model-based techniques, e.g., those based on the Luedeking/Piret-type are not as accurate as the ANN approach; however, they are very robust. Techniques based on principal component analysis can be used to recognize abnormal cultivation behavior. For the cases investigated, a complete ranking list of the methods is given in terms of the root-mean-square error of the estimates. All techniques examined are in line with the recommendations expressed in the process analytical technology (PAT)-initiative of the FDA.
Similar content being viewed by others
References
Dong D, McAvoy TJ (1994) Non-linear principal component analysis-based on principal curves and neural networks. Proc Acc 2:1284–1288
FDA (2003) Guidance for Industry: PAT—a framework for innovative pharmaceutical manufacturing and quality assurance. Food and Drug Administration, Rockville
Haykin S (1999) Neural networks, 2nd edn. Prentice Hall, Englewood Cliffs
Hiden HG, Willis MJ, Tham MT, Montague GA (1999) Non-linear principal components analysis using genetic programming. Comp Chem Eng 23:413–425
Jackson JE (1991) A user’s guide to principal components. Wiley, New York
Jenzsch M, Simutis R, Lübbert A (2005a) Application of model predictive control to cultivation processes for protein production with genetically modified bacteria. In: Pons MN, van Impe JFM (eds) Computer application in biotechnology 2004 (CAB9), IFAC/Elsevier, Amsterdam, pp 511–516. ISBN 0 08 044251 X
Jenzsch M, Simutis R, Lübbert A (2005b) Generic model control of the specific growth rate in recombinant Escherichia coli cultivations. J Biotechnol (in press)
Jollife IT (1986) Principal component analysis. Springer, Berlin Heidelberg New York
Kourti T, MacGregor JF (1995) Multivariate process analysis, monitoring and diagnosis, using multivariate projection methods—a tutorial. Chemometrics Int Lab Syst 28:3
Kramer MA (1991) Nonlinear principal component analysis using auto associative neural networks. AIChE J 37(2):233–243
Luedeking R, Piret EL (1959a) A kinetic study of the lactic acid fermentation batch process at controlled pH. J Biochem Microbiol Technol Eng 1:393–412
Luedeking R, Piret EL (1959b) Transient and steady state continuous fermentation: theory and experiment. J Biochem Microbiol Technol Eng 1:431–459
Nomikos P, MacGregor JF (1994) Monitoring batch processes using multiway principal component analysis. AIChE J 40(8):1361
Sambrook JE, Russell DW (2001) Molecular cloning, 3rd edn. Cold Spring Habor Laboratory Press, Cold Spring Habor
Shuler ML, Kargi F (2002) Bioprocess engineering basics concepts, 2nd edn. Prentice Hall, Upper Saddle River
Acknowledgements
Part of the work presented has been financed by the “Kultusministerium des Landes Sachsen-Anhalt”. We gratefully acknowledge this support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Jenzsch, M., Simutis, R., Eisbrenner, G. et al. Estimation of biomass concentrations in fermentation processes for recombinant protein production. Bioprocess Biosyst Eng 29, 19–27 (2006). https://doi.org/10.1007/s00449-006-0051-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00449-006-0051-6