Combined neural network and reduced FRF techniques for slight damage detection using measured response data

Summary

 This paper deals with structural damage detection using measured frequency response functions (FRF) as input data to artificial neural networks (ANN). A major obstacle, the impracticality of using full-size FRF data with ANNs, was circumvented by applying a data-reduction technique based on principal component analysis (PCA). The compressed FRFs, represented by their projection onto the most significant principal components, were used as the ANN input variables instead of the raw FRF data. The output is a prediction of the actual state of the specimen, i.e. healthy or damaged. A further advantage of this particular approach is its ability to deal with relatively high measurement noise, which is a common occurrence when dealing with industrial structures. The methodology was applied to detect three different states of a space antenna: reference, slight mass damage and slight stiffness damage. About 600 FRF measurements, each with 1024 spectral points, were included in the analysis. Six 2-hidden layer networks, each with an individually-optimised architecture for a specific FRF reduction level, were used for damage detection. The results showed that it was possible to distinguish between the three states of the antenna with good accuracy, subject to using an adequate number of principal components together with a suitable neural network configuration. It was also found that the quality of the raw FRF data remained a major consideration, though the method was able to filter out some of the measurement noise. The convergence and detection properties of the networks were improved significantly by removing those FRFs associated with measurement errors.