Summary
The paper analyses specific features of the response of two-phase materials with different thermomechanical properties of the phases to purely thermal cycling. It is shown that even without mechanical loading both shakedown and ratchetting regimes are possible. A short review is given of the phenomena and various models of shakedown and ratchetting under cyclic thermomechanical loading. Three structural models for the description of a special two-phase material, namely the duplex stainless steel, under purely thermal loading are discussed: a simple two-bar model, a composite cylinder model and micromechanical finite element models with duplex topologies. These models account for different features of the deformation process during thermal cycling and are used as basis for the analysis of thermal ratchetting. Results of numerical simulations are presented for various material conditions and modelling schemes.
Conditions for material immanent ratchetting are derived and verified by numerical experiments. It is shown that a temperature-dependence of the yield stresses of the two phases, which exhibits an intersection of the corresponding curves within the temperature interval of the cyclic thermal load, enforces this sort of ratchetting, lacking intersection of the yield stress-temperature curves indicates, on the other hand, a lesser or lacking tendency for material immanent ratchetting. Comparisons with results of laboratory experiment are also presented, and the tendencies derived from the micromechanical models are verified.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received 29 April 1999; accepted for publication 15 June 1999
Rights and permissions
About this article
Cite this article
Silberschmidt, V., Rammerstorfer, F., Werner, E. et al. On material immanent ratchetting of two-phase materials under cyclic purely thermal loading. Archive of Applied Mechanics 69, 727–750 (1999). https://doi.org/10.1007/s004190050253
Issue Date:
DOI: https://doi.org/10.1007/s004190050253