Summary
The effect of surface mass flux on the non-Darcy natural convection over a horizontal flat plate in a saturated porous medium is studied using similarity solution technique. Forchheimer extension is considered in the flow equations. The suction/injection velocity distribution has been assumed to have power function form Bx l, similar to that of the wall temperature distribution Ax n, where x is the distance from the leading edge. The thermal diffusivity coefficient has been assumed to be the sum of the molecular diffusivity and the dynamic diffusivity due to mechanical dispersion. The dynamic diffusivity is assumed to vary linearly with the velocity component in the x direction, i.e. along the hot wall. For the problem of constant heat flux from the surface (n=1/2), similarity solution is possible when the exponent l takes the value −1/2. Results indicate that the boundary layer thickness decreases whereas the heat transfer rate increases as the mass flux parameter passes from the injection domain to the suction domain. The increase in the thermal dispersion parameter is observed to favor the heat transfer by reducing the boundary layer thickness. The combined effect of thermal dispersion and fluid suction/injection on the heat transfer rate is discussed.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received 7 December 1995; accepted for publication 7 January 1997
Rights and permissions
About this article
Cite this article
Murthy, P., Singh, P. Thermal dispersion effects on non-Darcy natural convection over horizontal plate with surface mass flux. Archive of Applied Mechanics 67, 487–495 (1997). https://doi.org/10.1007/s004190050133
Issue Date:
DOI: https://doi.org/10.1007/s004190050133