Abstract
Stress magnification in thin ligaments between small and large cylindrical voids is obtained by matching the inner field approximation by beam theory to the outer rigid-body field in the bulk of the material. A void between two larger voids is modeled as a large hole within a strip of straight edges (boundaries of the holes with infinite radii of curvature). Both stretching and bending types of loading are applied to the strip. Comparison of different orders of stress magnification for different geometries and loading conditions is made. It is shown that the order of stress magnification in thin ligaments is (R/δ)n, where n=1/2 in the ligament between one small and one large void, n=1 in the ligament between one small void and two large voids, or between two small and two large voids, and n=2 in the ligament between a large void and a small void coalescing with another large void. The relevance of these results for the study of material failure by void growth and coalescence is discussed.
Similar content being viewed by others
References
Bandstra J.P., Koss D.A., Geltmacher A., Matic P., Everett R.K. (2004). Modeling void coalescence during ductile fracture of a steel. Mater Sci Eng A 366:269–281
Gologanu M., Leblond J.B., Perrin G., Devaux J. (2001). Theoretical models for void coalescence in porous ductile solids: coalescence in layers. Int J Solids Struct 38:5581–5594
Lubarda V.A., Schneider M.S., Kalantar D.H., Remington B.A., Meyers M.A. (2004). Void growth by dislocation emission. Acta Mater 52:1397–1408
Marian J., Knap J., Ortiz M. (2005). Nanovoid deformation in aluminum under simple shear. Acta Mater 53:2893–2900
Nakayama Y., Tvergaard V. (2004). Interaction of two closely spaced voids during growth to coalescence. Key Eng Materials 274–276:81–86
Ragab A.R. (2004). A model for ductile fracture based on internal necking of spheroidal voids. Acta Mater 52:3997–4009
Seppala, E.T., Belak, J., Rudd, R.E.: Three-dimensional molecular dynamics simulations of void coalescence during dynamic fracture of ductile metals. Phys Review B 71 (2005) Art. No. 064112
Asaro R.J., Lubarda V.A. (2006). Mechanics of solids and materials. Cambridge University Press, Cambridge
Koiter W.T. (1957). An elementary solution of two stress concentration problems in the neighborhood of a hole. Q Appl Math 15:303–308
Keller J.B. (1993). Stresses in narrow regions. J Appl Mech 60:1054–1056
Duan Z.P., Kienzler R., Herrmann G. (1986). An integral equation method and its application to defect mechanics. J Mech Phys Solids 34:539–561
Markenscoff X., Dundurs J. (1992). Amplification of stresses in thin ligaments. Int J Solids Struct 29:1883–1888
Markenscoff X. (2000). Stress amplification in the neighborhood of an eccentric large hole in a strip in tension. Z Angew Math Phys 51:550–554
Mindlin R.D. (1940). Stress distribution around a tunnel. Trans ASCE 105:1117–1153
Noda N.A., Nisitani H. (1987). Stress concentration of a strip with a single edge notch. Eng Fract Mech 28:223–238
Teh L.S., Brennan F.P. (2005). Stress intensity factors for cracks emanating from two-dimensional semicircular notches using the composition of SIF weight functions. Fatigue Fract Eng Mater Struct 28:423–435
Råde L., Westergren B. (1999). Mathematics handbook for science and engineering. Springer, Berlin Heidelberg New York
Callias C.J., Markenscoff X. (1989). Singular asymptotics analysis for the singularity at a hole near a boundary. Q Appl Math 47:233–245
Mindlin R.D. (1948). Stress distribution around a hole near the edge of a plate under tension. Proc SESA 5:56–67
Lubarda V.A., Markenscoff X. (2003). The stress field for a screw dislocation near cavities and straight boundaries. Mater Sci Eng A 349:327–334
Wu L., Markenscoff X. (1997). Asymptotics for thin elastic ligaments with applications to body force and thermal loading. J Mech Phys Solids 45:2033–2054
Wu L., Markenscoff X. (1996). Singular stress amplification between two holes in tension. J Elasticity 44:131–144
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Lubarda, V.A., Markenscoff, X. Stress Magnification due to Stretching and Bending of Thin Ligaments between Voids. Arch Appl Mech 76, 295–310 (2006). https://doi.org/10.1007/s00419-006-0028-6
Received:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00419-006-0028-6