Abstract
Background. In this study, a simple and reliable radiographic method is described to determine the torsional profile of the humeral head.
Methods. First, by using a specially developed frame, the humeral head retroversion angles (HRAs) of 20 dry humeri were measured by an anatomist and an orthopedist. Then the HRA of these humeri were measured by two orthopedists on radiographs taken in semi-axial view when the humeri were in 20° abduction.
Results. The results were assessed with the SPSS 9.05 program, and the repeatability coefficient of both methods was 98%. The average difference in angle determination between the two methods was 0.9°; the maximum difference was 3°. After that, posteroanterior semi-axial radiographs of both humerus bones of 40 healthy volunteers were taken by positioning their arms in 20° abduction to the X-ray axis. The mean HRA difference between the right and left sides was 0.4° (maximum difference 3°) and is of no clinical significance. It was determined that left and right HRAs can be taken as a reference to each other. For measurement of the HRA in the planning of proximal humeral rotation osteotomy and prosthesis replacement arthroplasty, the presented radiographic method can be used with a high rate of accuracy.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Electronic Publication
Rights and permissions
About this article
Cite this article
Öztuna, V., Öztürk, H., Eskandari, M.M. et al. Measurement of the humeral head retroversion angle . Arch Orthop Trauma Surg 122, 406–409 (2002). https://doi.org/10.1007/s00402-002-0398-3
Received:
Issue Date:
DOI: https://doi.org/10.1007/s00402-002-0398-3