Abstract
The aim of the present work is to analyze the complex phenomena involved in the concentrated milk clotting process in order to define general criteria applicable to the design of a continuous coagulator. A full characterization of the rheological properties of completely hydrolyzed milk as a function of two different parameters, i.e., the coagulator temperature and the concentration degree of the milk, is presented. The dynamic evolution of loss, G′′, and storage, G′, moduli has been obtained at different frequency values and for different concentration degrees during the clotting process. Time cure tests have been performed on completely hydrolyzed milk samples showing that the rate of curing is very high and that the time for rheological experiments is much too short for testing Winter's theory of gelation. To overcome this problem, the intersect of loss and storage moduli was used for estimating the coagulation. Coagulation is faster when higher temperatures are used and the consistency of the final curd is greater if a more concentrated milk is used. A tentative physical explanation based on the network theories is presented. If an observation time far enough from the crossover point is chosen it can be seen that the curd strength estimated at 40 °C is about 50 times higher than that one evaluated at 25 °C. Among the considered temperatures, a good processing value was evaluated at 40 °C.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 6 February 2000 Accepted: 24 October 2000
Rights and permissions
About this article
Cite this article
Curcio, S., Gabriele, D., Giordano, V. et al. A rheological approach to the study of concentrated milk clotting. Rheol. Acta 40, 154–161 (2001). https://doi.org/10.1007/s003970000146
Issue Date:
DOI: https://doi.org/10.1007/s003970000146