Abstract
Using sodium silicate as precursor, rod-like mesoporous silica with hexagonal appearance was synthesized by controlling the pH value of a mixed micelles solution of cetyltrimethylammonium bromide (CTAB) and cetyltrimethylammonium chloride (CTAC) during hydrolysis of ethyl acetate. The resulting mesoporous silica was characterized by small angle X-ray diffraction, nitrogen gas adsorption-desorption measurement and scanning electron microscopy. Results showed that the regular rod-like shapes with hexagonal appearance were obtained at a 9:1 molar ratio of CTAB to CTAC, and that the amounts and lengths of the rod-like mesoporous silica particles decreased with decreasing CTAB to CTAC molar ratio. There existed a type IV adsorption isotherm and an H1 hysteresis loop in N2 gas adsorption-desorption curves.
Similar content being viewed by others
References
Ying JY, Mehnert CP, Wong MS (1999) Angew Chem Int Edn 38:56
Huo Q, Margolese DI, Ciesla U, Feng P, Gier TE, Sieger P, Leon R, Petroff PM, Schuth F, Stuky GD (1994) Nature 368:317
Lin HP, Mou CY (1996) Science 273:765
Lin H-P, Cheng S, Mou C-Y (1998) Chem Mater 10:581
Schacht S, Huo Q, Voigt-Martin IG, Stucky GD, Schuth F (1996) Science 273:768
Yang H, Coombs N, Ozin GA (1997) Nature 386:692
Zhao D, Sun J, Li Q, Stucky GD (2000) Chem Mater 12:275
Delsannti M, Moussaid A, Munch JP (1993) J Colloid Interface Sci 157:285
Sepúlveda L, Cortés J (1985) J Phys Chem 89:5322
Fabre H, Kamunka N, Khan A, Lindblom G, Lindman B (1980) J Phys Chem 84:3428
Fengcheng C, Luan Z, Klinowski J (1995) Langmuir 11:2815
Sing KSW, Everett DH, Haul RAW, Moscou L, Pierotti RA, Rouquérol J, Siemieniewska T (1985) Pure Appl Chem 57:603
Acknowledgements
This research is supported by State Key Laboratory of New Ceramic and Fine Processes of Tsinghua University and Visiting Scholar Foundation of Key Lab in University.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Han, S., Hou, W., Dang, W. et al. Synthesis of rod-like mesoporous silica with hexagonal appearance using sodium silicate as precursor. Colloid Polym Sci 282, 761–765 (2004). https://doi.org/10.1007/s00396-003-1016-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00396-003-1016-9