Abstract
The electric operated road vehicles are frequently powered by lithium ion batteries due to its low cost and ease of manufacturing. However, unforeseen impacts in road conditions can lead to fire hazard due to short circuiting of the battery pack. The impact strength of the battery pack can hence provide a key design input for manufacturing next generation batteries with a durable safe limit. In this work, a finite element based neural search approach is proposed for determining the effects of various uncertain phenomena on the strength of the battery. The approach combines the actual impact mechanics of battery as determined by the finite element model along with the high accuracy and robustness provided by neural search algorithm. The derived model is able to satisfactorily predict the variances in the mechanical strength even with slightest uncertainties in the phenomena which can affect the strength of the battery pack. It is anticipated that the proposed model will be of utmost importance in design of next generation safe and durable lithium ion battery packs.
Similar content being viewed by others
References
Arora S, Shen W, Kapoor A (2016) Review of mechanical design and strategic placement technique of a robust battery pack for electric vehicles. Renew Sustain Energy Rev 60:1319–1331
Brown S, Pyke D, Steenhof P (2010) Electric vehicles: The role and importance of standards in an emerging market. Energy Policy 38(7):3797–806
Chen SC, Wan CC, Wang YY (2005) Thermal analysis of lithium-ion batteries. J Power Sour 140(1):111–24
Cuma MU, Koroglu T (2015) A comprehensive review on estimation strategies used in hybrid and battery electric vehicles. Renew Sustain Energy Rev 42:517–31
Dai Y, Luo Y, Chu W, Li K (2014) Optimum tyre force distribution for four-wheel-independent drive electric vehicle with active front steering. Int J Veh Des 65(4):336–59
Dinger A, Martin R, Mosquet X, Rabl M, Rizoulis D, Russo M, Sticher G (2010) Batteries for electric cars: challenges, opportunities, and the outlook to 2020. Boston Consulting Group, San Francisco, USA
Du J, Ouyang M (2013) Review of electric vehicle technologies progress and development prospect in China. In: Electric Vehicle Symposium and Exhibition (EVS27), 2013 World. IEEE, Barcelona, Spain, pp 1–8. https://doi.org/10.1109/EVS.2013.6914849
Dubarry M, Vuillaume N, Liaw BY (2008) From Li-ion single cell model to battery pack simulation. In control applications, 2008. CCA 2008. IEEE international conference on 2008 Sep 3. IEEE pp 708–713
Fotouhi A, Auger DJ, Propp K, Longo S, Wild M (2016) A review on electric vehicle battery modelling: from lithium-ion toward lithium–sulphur. Renew Sustain Energy Rev 56:1008–1021
Gallardo-Lozano J, Romero-Cadaval E, Milanes-Montero MI, Guerrero-Martinez MA (2014) Battery equalization active methods. J Power Sour 246:934–49
Gong X, Xiong R, Mi CC (2015 Mar) Study of the characteristics of battery packs in electric vehicles with parallel-connected lithium-ion battery cells. IEEE Trans Ind Appl 51(2):1872–1879
Hanifah RA, Toha SF, Ahmad S (2015) Electric vehicle battery modelling and performance comparison in relation to range anxiety. Procedia Comput Sci 76:250–256
Hilbe JM (2012) STATISTICA 7. Am Stat 61(1):91–94. https://doi.org/10.1198/000313007X172998
Huo H, Zhang Q, Wang MQ, Streets DG, He K (2010) Environmental implication of electric vehicles in China. Environ Sci Technol 24(13):4856–4861 44(
Jaguemont J, Boulon L, Dubé Y (2016) A comprehensive review of lithium-ion batteries used in hybrid and electric vehicles at cold temperatures. Appl Energy 164:99–114
Barillas JK, Li J, Günther C, Danzer MA (2015) A comparative study and validation of state estimation algorithms for Li-ion batteries in battery management systems. Appl Energy 155:455–462
Nykvist B, Nilsson M (2015) Rapidly falling costs of battery packs for electric vehicles. Nat Clim Change 5(4):329–32
Sun F, Xiong R, He H (2016) A systematic state-of-charge estimation framework for multi-cell battery pack in electric vehicles using bias correction technique. Appl Energy 162:1399–1409
Sahraei E, Hill R, Wierzbicki T (2012) Calibration and finite element simulation of pouch lithium-ion batteries for mechanical integrity. J Power Sour 201:307–321
Sahraei E, Meier J, Wierzbicki T (2014) Characterizing and modeling mechanical properties and onset of short circuit for three types of lithium-ion pouch cells. J Power Sour 247:503–516
Tie SF, Tan CW (2013) A review of energy sources and energy management system in electric vehicles. Renew Sustain Energy Rev 20:82–102
Xiong R, Sun F, Gong X, Gao C (2014) A data-driven based adaptive state of charge estimator of lithium-ion polymer battery used in electric vehicles. Appl Energy 113:1421–1433
Wang XL, Han WQ, Chen H, Bai J, Tyson TA, Yu XQ, Wang XJ, Yang XQ (2011) Amorphous hierarchical porous GeO x as high-capacity anodes for Li ion batteries with very long cycling life. J Am Chem Soc 133(51):20692–20695
Wang H, Fu L, Bi J (2011) CO2 and pollutant emissions from passenger cars in China. Energy Policy 39(5):3005–3011
Wen X, Xiao C (2011) Electric vehicle key technology research in China. In: 2011 international aegean conference on electrical machines and power electronics and 2011 electromotion joint conference (ACEMP), 8 Sep 2011. IEEE, Istanbul, Turkey, pp 308–314. https://doi.org/10.1109/ACEMP.2011.6490616
Wierzbicki T, Sahraei E (2013) Homogenized mechanical properties for the jellyroll of cylindrical Lithium-ion cells. J Power Sour 241:467–476
Yarime M, Shiroyama H, Kuroki Y (2008) The strategies of the Japanese auto industry in developing hybrid and fuel cell vehicles. Making choices about hydrogen: transport issues for developing countries. United Nations University Press, USA, p 193
Dufo-López R, Lujano-Rojas JM, Bernal-Agustín JL (2014) Comparison of different lead–acid battery lifetime prediction models for use in simulation of stand-alone photovoltaic systems. Appl Energy 115:242–253
Young K, Wang C, Wang LY, Strunz K (2013) Electric vehicle battery technologies. In: Electric vehicle integration into modern power networks. Springer, New York pp 15–56
Vijayaraghavan V, Garg A, Gao L, Vijayaraghavan R, Lu G (2016) A finite element based data analytics approach for modeling turning process of Inconel 718 alloys. J Clean Prod 137:1619–1627
Vijayaraghavan V, Garg A, Gao L, Vijayaraghavan R (2017) Finite element based physical chemical modeling of corrosion in magnesium alloys. Metals 7(3):83
Vijayaraghavan V, Garg A, Gao L (2018) Fracture mechanics modelling of lithium-ion batteries under pinch torsion test. Measurement 114:382–389
Huang Y, Gao L, Yi Z, Tai K, Kalita P, Prapainainar P, Garg A (2018) An application of evolutionary system identification algorithm in modelling of energy production system. Measurement 114:122–131
Garg A, Vijayaraghavan V, Zhang J, Li S, Liang X (2017) Design of robust battery capacity model for electric vehicle by incorporation of uncertainties. Int J Energy Res 41(10):1436–1451
Garg A, Shankhwar K, Jiang D et al (2016) An evolutionary framework in modelling of multi-output characteristics of the bone drilling process. Neural Comput Appl. https://doi.org/10.1007/s00521-016-2632-x
Garg A, Li J, Hou J, Berretta C, Garg A (2017) A new computational approach for estimation of wilting point for green infrastructure. Measurement 111:351–358
Acknowledgements
This study was also supported by Shantou University Scientific Research Funded Project (Grant No. NTF 16002).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Vijayaraghavan, V., Shui, L., Garg, A. et al. Crash analysis of lithium-ion batteries using finite element based neural search analytical models. Engineering with Computers 35, 115–125 (2019). https://doi.org/10.1007/s00366-018-0587-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00366-018-0587-5