Abstract
A flow tagging technique based upon ionic fluorescence in strontium is investigated for applications to velocity measurements in gas flows. The method is based upon a combination of two laser based spectroscopic techniques, i.e. resonantly-enhanced ionisation and laser-induced ionic fluorescence. Strontium is first ionised and then planar laser-induced fluorescence is utilised to give 2D `bright images' of the ionised region of the flow at a given time delay. The results show that this method can be used for velocity measurements. The velocities were measured in two types of air–acetylene flames – a slot burner and a circular burner yielding velocities of 5.1 ± 0.1 m/s and 9.3 ± 0.2 m/s, respectively. The feasibility of the method for the determination of velocities in faster flows than those investigated here is discussed.
Similar content being viewed by others
Author information
Authors and Affiliations
Additional information
Received: 5 November 1998/Accepted: 19 January 2000
Rights and permissions
About this article
Cite this article
Rubinsztein-Dunlop, H., Littleton, B., Barker, P. et al. Ionic strontium fluorescence as a method for flow tagging velocimetry. Experiments in Fluids 30, 36–42 (2001). https://doi.org/10.1007/s003480000132
Issue Date:
DOI: https://doi.org/10.1007/s003480000132