Cavitation of a submerged jet

Abstract

A cavitation cloud forms when a high-pressure water jet is submerged in a tank of quiescent water. The water jet is formed as high-pressure nitrogen forces a fixed-volume column of water through a nozzle. The diameter and exit velocity of the water jet affect the behavior and geometry of the resulting cavitation. The relationships between the Reynolds number of the flow and the measured cloud geometry, propagation distance, pulsation frequency, and front velocity are presented. The distance a cloud propagated increased by 30 % when the diameter of the jet was doubled from 1.0 to 2.0 mm. Additionally, the longitudinal cross-sectional area and propagation distance increase with increasing Reynolds number, while the frequency at which the jet pulsed from the nozzle was found to decrease with an increase in Reynolds number.

This is a preview of subscription content, access via your institution.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23

References

  1. Bourne NK, Field JE (1995) A high-speed photographic study of cavitation damage. J Appl Phys 78(7):4423

    Article  Google Scholar 

  2. Brujan EA, Keen GS, Vogel A, Blake JR (2002) The final stage of the collapse of a cavitation bubble close to a rigid boundary. Phys Fluids 14(1):85–62

    Article  Google Scholar 

  3. Coleman SL, Scott VD (1995) Comparison of tunnel and jet methods for cavitation erosion testing. Wear 184:73–81

    Article  Google Scholar 

  4. Cook SS (1928) Erosion by water hammer. Proc R Soc Lond 119:481–488

    Article  Google Scholar 

  5. Gopalan S, Katz J, Knio O (1999) The flow structure in the near field of jets and its effect on cavitation inception. J Fluid Mech 398:1–43

    MATH  Article  Google Scholar 

  6. Hansson I, Mørch KA (1980) The dynamics of cavity clusters in ultrasonic (vibratory) cavitation erosion. J Appl Phys 51(9):4651–4658

    Article  Google Scholar 

  7. Hutli E, Nedeljkovic M (2008) Frequency in shedding/discharging cavitation clouds determined by visualization of a submerged cavitating jet. J Fluids Eng 130(2):021304-1–8. doi:10.1115/1.2813125

    Article  Google Scholar 

  8. Jayaprakash A, Chahine G, Hsiao CT (2010) Numerical and experimental study of the interaction of a spark-generated bubble and a vertical wall. In: ASME 2010 International mechanical engineering congress and exposition 12–18, 2010

  9. Knapp R, Daily J, Hammitt F (1970) Cavitation. McGraw-Hill Book Company, New York

    Google Scholar 

  10. Kornfeld M, Suvorov L (1944) On the destructive action of cavitation. J Appl Phys 15:495–506

    Article  Google Scholar 

  11. Krella A (2011) An experimental parameter of cavitation erosion resistance for tin coatings. Wear 270(3–4):252–257. http://www.sciencedirect.com/science/article/pii/S0043164810003996

    Article  Google Scholar 

  12. Munson BR, Young DF, Okiishi TH (2006) Fundamentals of fluid mechanics, 5th edn. Wiley, New York

    Google Scholar 

  13. O’Hern TJ (1990) An experimental investigation of turbulent shear flow cavitation. J Fluid Mech 215:365–391

    Article  Google Scholar 

  14. Ooi KK (1985) Scale effects on cavitation inception in submerged water jets: a new look. J Fluid Mech 151:367–390

    Article  Google Scholar 

  15. Parsons CA, Cook SS (1919) Investigations into the causes of corrosion or erosion of propellers. J Am Soc Naval Eng 31(2):536–541

    Article  Google Scholar 

  16. Philipp A, Lauterborn W (1998) Cavitation erosion by single laser-produced bubbles. J Fluid Mech 361:75–116

    MATH  Article  Google Scholar 

  17. Pritchard PJ, Leylegian JC (2011) Fox and McDonald’s introduction to fluid mechanics, 5th edn. Wiley, New York

    Google Scholar 

  18. Rayleigh L (1917) On the pressure developed in a liquid during the collapse of a spherical cavity. Philos Mag 34:94–98

    MATH  Google Scholar 

  19. Reisman GE, Wang YC, Brennen CE (1998) Observations of shock waves in cloud cavitation. J Fluid Mech 355:255–283

    MATH  Article  Google Scholar 

  20. Reynolds O (1901) Experiments showing the boiling of water in an open tube at ordinary temperatures. Pap Mech Phys Subj 2:578–587

    Google Scholar 

  21. Sato K, Sugimoto Y, Ohjimi S (2009) Structure of periodic cavitation clouds in submerged impinging water-jet issued from horn-type nozzle. In: Ninth Pacific rim international conference on water jetting technology

  22. Sato K, Sugimoto Y, Ohjimi S (2009) Pressure-wave formation and collapses of cavitation clouds impinging on a solid wall in a submerged water jet. In: Seventh international symposium on cavitation CAV2009 17–22 Aug, 2009

  23. Savchenko YN (2001) In: CAV 2001: Fourth international symposium on cavitation (http://resolver.caltech.edu/CAV2001:lecture.003. Accessed 5 May 2012)

  24. Soyama H, Yanauchi Y, Sato K, Ikohagi T, Oba R, Oshima R (1996) High-speed observation of ultrahigh-speed submerged water jets. Exp Therm Fluid Sci 12:411–416

    Article  Google Scholar 

  25. Strasberg M (1953) The pulsation frequency of nonspherical gas bubbles in liquids. J Acoust Soc Am 25(3):536–537

    Article  Google Scholar 

  26. Tarasenko T (2009) Hydraulic driven cavitational generators of pressure pulsations for cleaning of elements of hydraulic systems. PhD short thesis, National Technical University (KPI), Ukraine

  27. Trilling L (1952) The collapse and rebound of a gas bubble. J Appl Phys 23(1):14–17

    MathSciNet  Article  Google Scholar 

  28. Wu X, Chahine G (2007) Characterization of the content of the cavity behind a high-speed supercavitating body. J Fluids Eng 129:136–145

    Article  Google Scholar 

  29. Xianzhi S et al (2010) Mechanisms and field test of solution mining by self-resonating cavitating water jets. Pet Sci 7(3):385–389

    Article  Google Scholar 

Download references

Acknowledgements

We are grateful for the funding through the Naval Research Enterprise Internship Program (NREIP) and the In-house Laboratory Independent Research Program (ILIR) at the Naval Undersea Warfare Center. We also thank Tom Gieseke and Bob Kuklinski for the initial idea/patent. We also wish to thank the Brigham Young University Department of Mechanical Engineering and the Thayer School of Engineering at Dartmouth College for providing financial support for this work.

Author information

Affiliations

Authors

Corresponding author

Correspondence to Tadd T. Truscott.

Electronic supplementary material

Below is the link to the electronic supplementary material.

MOV (33563)

Electronic supplementary material

MOV (37714)

Electronic supplementary material

MOV (31832)

Electronic supplementary material

MOV (32196)

Electronic supplementary material

MOV (38641)

Electronic supplementary material

MOV (10394)

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Wright, M.M., Epps, B., Dropkin, A. et al. Cavitation of a submerged jet. Exp Fluids 54, 1541 (2013). https://doi.org/10.1007/s00348-013-1541-3

Download citation

Keywords

  • Cavitation
  • Nozzle Exit
  • Propagation Distance
  • Cavitation Bubble
  • Nozzle Diameter