Abstract.
Our aim was to produce EUV multilayer mirrors with a small spectral bandwidth ΔE≤3 eV at 70 eV peak energy using UHV electron beam evaporation by varying the thickness ratio (Γ=) between the absorber layer and the bilayer. The deposition process was controlled by in situ soft X-ray reflectometry, and ion-beam polishing as well as substrate-heating methods were applied to reduce the interface roughness. The reflection properties of the Mo–Si multilayer mirrors prepared were characterized by hard and soft X-ray reflectometry and details of the multilayer structure were revealed from cross-sectional transmission electron microscopy.
Author information
Authors and Affiliations
Additional information
Received: 22 September 2000 / Accepted: 4 October 2000 / Published online: 30 November 2000
Rights and permissions
About this article
Cite this article
Lim, Y., Westerwalbesloh, T., Aschentrup, A. et al. Fabrication and characterization of EUV multilayer mirrors optimized for small spectral reflection bandwidth . Appl Phys A 72, 121–124 (2001). https://doi.org/10.1007/s003390000723
Issue Date:
DOI: https://doi.org/10.1007/s003390000723