Abstract
Based on first-principles calculations and d-electronic theoretical alloy design methods, using non-biotoxic Mo, Nb, Zr alloy elements, theoretically designed a low-elastic, high-strength Ti-Mo-Nb-Zr biomedical β titanium alloy, and test and analyze the alloy’s microstructure, mechanical properties, corrosion resistance and other properties. The results show that the addition of a small amount of Zr is beneficial to the formation of the β phase of the titanium alloy and has a certain refining effect on the grains. When the Zr content is 3 wt%, the Ti-Mo-Nb-Zr alloy has a uniform size and crystal. It has a clear β-phase structure with fewer sintering defects in the alloy, and its elastic modulus is the smallest at 43.39 GPa, and its compressive strength is higher at 955 MPa. It meets the requirements of mechanical properties of bone-implant materials and has good corrosion resistance.
This is a preview of subscription content, log in via an institution to check access.
Similar content being viewed by others
References
J.S. Ren, Y.M. Zhang, J. Tan et al., Mater Guide: Nano New Mater Album 002, 384–388 (2016)
D.Y. Fan, Y.J. Zhou, S.W. Li et al., Oral Dis Prev. 29(4), 284–288 (2021)
X.M. Diao, China J. Tissue Eng. Res. 19(30), 4898–4902 (2015)
M. Niinomi, Sci. Technol. Adv. Mater. 4, 445–454 (2003)
F.R. Wei, H. Wang, X.D. Jin et al., World Nonferrous Metals 02, 271–273 (2018)
P. Neacsu, D.M. Gordin, V. Mitran et al., Mater. Sci. Eng. 47, 105–113 (2015)
T.C. Cui, S.J. Li, Y.L. Hao, J. Mater. Res. 022, 225–229 (2008)
C. Yan, L. Yan, L. Kun, Mater. Sci. Eng., A 527, 652–656 (2010)
X. Zhao, C. Wang, H.Y. Liu, Mater. Rep. 32, 539–543 (2018)
S.J. Dai, Y. Wang, F. Chen et al., Chin. J. Nonferrous Metals: English version 010, 3027–3032 (2013)
L.C. Zhao, C.X. Cui, S.J. Liu et al., Rare Metal Mater. Eng. 037, 108–111 (2008)
T.I. Kim, J.H. Han, I.S. Lee et al., Bio Med. Mater. Eng. 7, 253 (1997)
Y. Xu, S.T. Zhao, Z.Y. Wei et al., Rare Met. 044, 109–112 (2020)
M. Abdel-Hady, H. Fuwa, K. Hinoshita et al., Scripta Mater. 57, 1000–1003 (2007)
Q.J. Wang, Q. Gao, K.S. Wang et al., Hot Work. Process 042, 14-17,21 (2013)
S.J. Dai, Y. Wang, F. Chen et al., Trans. Nonferrous Metals Soc. China 23, 3027–3032 (2013)
R.G. Wang, Q. Gao, J.X. Liu et al., Mater. Bull. 3, 44–51 (2017)
Y. Zhou, X.J. Yang, Z.D. Cui, Heat Treat. Met. 30, 47–50 (2005)
Z.T.J.Y. YuHan, X.Q. Ma, S. Yu, M.H. Zhang, Chin. J. Tissue Eng. Res. 17, 4707–4714 (2013)
F. Chen, Y. Wang, Chin. J. Nonferrous Metals 006, 1560–1566 (2013)
Q. Zhang, L. Zhang, P. Wang, S. Du, J. Pharm. Sci 103, 643–651 (2014)
Y.J. Wang, C. Du, N.R. Zhao et al., J. South China Univ. Technol. (Nat. Sci. Ed.) 40, 51–58 (2012)
Q. Maxi, Z.T. Yu, J.L. Niu et al., Rare Metal Mater. Eng. 039, 1956–1959 (2010)
J. Zhao, H.T. Duan, H.T. Li, Rare Metal Mater. Eng. 39, 1707–1710 (2010)
Z. Yu, Y. Li, X. Yang et al., J. Alloy. Compd. 486(1–2), 628–632 (2009)
M. Abdel Hady, K. Hinoshita, M. Morinaga, Scripta Mater 55(5), 477 (2006)
Acknowledgements
National Natural Science Foundation of China (NSFC) (Grant Nos. 51874140), Natural Science Foundation of Hebei Province of China (C2018209270)
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no conflict of interest.
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Xu, Y., Zhao, S. & Cai, Y. Design, preparation and performance research of β-type Ti-Mo-Nb-Zr alloy. Appl. Phys. A 128, 426 (2022). https://doi.org/10.1007/s00339-022-05538-5
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-022-05538-5