Abstract
Using structural composite materials for the fabrication of Radar Absorbing Materials (RAM) allows combining the strong load bearing capability with the radar absorbing functionality in a unique structure. This article shows the possibility to transpose an already existing metamaterial absorber to the domain of composite materials. The dielectric layers of the absorber initially designed with radio-frequency (RF) materials are replaced with fiber-reinforced composite materials classically used for naval applications that have been specially manufactured and characterized. The working principle of the absorber is explained in detail by analyzing the influence of each layer on the operating frequency band. The performances of the re-optimized composite absorber are compared against the initial RF design and other classical absorbers. The composite design has a total thickness of 8.9 mm and achieves a reflection coefficient below − 14 dB within the band 4.6–17.2 GHz at normal incidence. The reflection coefficient remains under − 10 dB at oblique incidence up to 45°.
Similar content being viewed by others
References
C. Wang, M. Chen, H. Lei, K. Yao, H. Li, W. Wen, D. Fang, Radar stealth and mechanical properties of a broadband radar absorbing structure. Compos. Part B Eng. 123, 19–27 (2017)
W. W. Salisbury, « Absorbent body for electromagnetic waves » , US2599944A, 10-June-1952
L.J. du Toit, The design of Jaumann absorbers. IEEE Antennas Propag. Mag. 36(6), 17–25 (1994)
N. Engheta, « Thin absorbing screens using metamaterial surfaces » , In: IEEE Antennas and Propagation Society International Symposium (IEEE Cat. No.02CH37313), 2002, vol. 2, p. 392-395
B.A. Munk, Frequency selective surfaces—theory and design (Wiley, New York, 2000)
X. Begaud, A.-C. Lepage, S. Varault, M. Soiron, A. Barka, Ultra-wideband and wide-angle microwave metamaterial absorber. Materials 11(10), 2045 (2018)
S. Varault, M. Soiron, A. Barka, A.C. Lepage, X. Begaud, RCS reduction with a dual polarized self-complementary connected array antenna. IEEE Trans. Antennas Propag. 65(2), 567–575 (2017)
O. Luukkonen, C. Simovski, G. Granet, G. Goussetis, D. Lioubtchenko, A.V. Räisänen, S.A. Tretyakov, Simple and accurate analytical model of planar grids and high-impedance surfaces comprising metal strips or patches. IEEE Trans. Antennas Propag. 56(6), 1624–1632 (2008)
X. Begaud, F. Linot, M. Soiron, C. Renard, Analytical model of a self-complementary connected antenna array on high impedance surface. Appl. Phys. A 115(2), 517–522 (2014)
Acknowledgements
The research leading to these results has received funding by French Ministry of Defense (DGA), through the French National Research Agency (ANR) and Astrid Program in the framework of SAFASNAV project.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Rance, O., Lepage, AC., Begaud, X. et al. Analysis and optimization of a wideband metamaterial absorber made of composite materials. Appl. Phys. A 125, 358 (2019). https://doi.org/10.1007/s00339-019-2653-2
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-019-2653-2