Abstract
The w-AlN → rs-AlN polymorphic transition in Ti–Al–N system with low TiN content (3 mol %) was observed. The experimental data show that this transition is possible under 12 GPa pressure at 1773 K. The formation of rs-AlN phase in the resulting composite materials was confirmed by XRD. The obtained materials have intermediate physical and mechanical properties as compared to the undoped w-AlN and TixAl1−xN solid solution. They are found to have high Vickers hardness (31 GPa at a load of 50 g)—which is twice as hard as w-AlN. The thermal conductivity of the rs-AlN-containing Al–Ti–N materials was measured for the first time using the frequency separation (3ω) method and gave high thermal conductivity coefficients up to 100 W/m × K.
Similar content being viewed by others
References
J.R. Grandusky, R.V. Randive, T.C. Jordan, L.J. Schowalter, in III-Nitride Ultraviolet Emitters, ed. by M. Kneiss, J. Rass (Springer, Cham, 2016), p. 442
Y. Bian, M. Liu, G. Ke, Y. Chen, J. DiBattista, E. Chan, Y. Yang, Surf. Coat. Technol. (2015). https://doi.org/10.1016/j.surfcoat.2014.11.060
D. Liu, S.J. Cho, J. Park, J. Gong, J.-H. Seo, R. Dalmau, D. Zhao, K. Kim, M. Kim, A.R.K. Kalapala, J.D. Albrecht, W. Zhou, B. Moody, Z. Ma, Appl. Phys. Lett. (2018). https://doi.org/10.1063/1.5038044
S. Subramani, M. Devarajan, IEEE Trans. Electron Devices (2016). https://doi.org/10.1109/TED.2016.2620519
A. Madan, I.W. Kim, S.C. Cheng, P. Yashar, V.P. Dravid, S.A. Barnett, Phys. Rev. Lett. (1997). https://doi.org/10.1103/PhysRevLett.78.1743
Z. Li, S. Yadav, Y. Chen, N. Li, X.-Y. Liu, J. Wang, S. Zhang, J.K. Baldwin, A. Misra, N. Mara, Mater. Res. Lett. (2017). https://doi.org/10.1080/21663831.2017.1303793
V.S. Kudyakova, R.A. Shishkin, A.A. Elagin, M.V. Baranov, A.R. Beketov, J. Eur. Ceram. Soc. (2017). https://doi.org/10.1016/j.jeurceramsoc.2016.11.051
A. Siegel, K. Parlinski, U. Wdowik, Phys. Rev. B (2006). https://doi.org/10.1103/PhysRevB.74.104116
M.R. Schwarz, M. Antlauf, S. Schmerler, K. Keller, T. Schlothauer, J. Kortus, G. Heide, E. Kroke, High Press. Res. (2014). https://doi.org/10.1080/08957959.2013.857020
V.V. Bannikov, V.S. Kudyakova, A.A. Elagin, M.V. Baranov, A.R. Beketov, J. Struct. Chem. (2016). https://doi.org/10.1134/S0022476616080072
N. Norrby, H. Lind, G. Parakhonskiy, M.P. Johansson, F. Tasnádi, L.S. Dubrovinsky, N. Dubrovinskaia, I.a. Abrikosov, M. Odén, J. Appl. Phys. (2013). https://doi.org/10.1063/1.4790800
B. Alling, A.V. Ruban, A. Karimi, O.E. Peil, S.I. Simak, L. Hultman, I.A. Abrikosov, Phys. Rev. B Condens. Matter Mater. Phys. (2007). https://doi.org/10.1103/PhysRevB.75.045123
B. Alling, T. Marten, I.A. Abrikosov, A. Karimi, J. Appl. Phys. (2007). https://doi.org/10.1063/1.2773625
D.-F. Lii, J. Mater. Sci. (1998). https://doi.org/10.1023/A:1004327421261
V.V. Bannikov, A.R. Beketov, M.V. Baranov, A.A. Elagin, V.S. Kudyakova, R.A. Shishkin, Phys. Solid State. (2016). https://doi.org/10.1134/S106378341605005X
L.G. Khvostantsev, L.F. Vereshchagin, A.P. Novikov, High Temp. High Press. (1977). https://doi.org/10.1080/0895795041233129876
ASTM E384-17: Standard test method for knoop and vickers hardness of materials
D.G. Cahill, Rev. Sci. Instrum. (1990). https://doi.org/10.1063/1.1141498
C.-K. Liu, C.-K. Yu, H.-C. Chien, S.-L. Kuo, C.-Y. Hsu, M.-J. Dai, G.-L. Luo, S.-C. Huang, M.-J. Huang, J. Appl. Phys. (2008). https://doi.org/10.1063/1.3032602
M.V. Shaleev, A.V. Novikov, D.V. Yurasov, J.M. Hartmann, O.A. Kuznetsov, D.N. Lobanov, Z.F. Krasilniket, Semiconductors. (2013). https://doi.org/10.1134/S106378261303024X
H. Vollstadt, E. Ito, M. Akaishi, S. Akimoto, O. Fukunaga, Proc. Jpn. Acad. B. (1990). https://doi.org/10.2183/pjab.66.7
A.E. Santana, A. Karimi, V.H. Derflinger, A. Schütze, Thin Solid Films. (2004). https://doi.org/10.1016/j.tsf.2004.08.147
A. Höling, L. Hultman, M. Odén, J. Sjölén, L. Karlsson, Surf. Coat Technol. (2005). https://doi.org/10.1016/j.surfcoat.2004.04.056
L. Chen, Y.X. Xu, Y. Du, Y. Liu, Thin Solid Films. (2015). https://doi.org/10.1016/j.tsf.2015.09.029
L. Karlsson, L. Hultmanb, J.-E. Sundgrenb, Thin Solid Films. (2000). https://doi.org/10.1016/S0040-6090(00)00996-2
J.P. Zhao, X. Wang, Z.Y. Chen, S.Q. Yang, T.S. Shi, X.H. Liu, J. Phys. D Appl. Phys. (1997). https://doi.org/10.1088/0022-3727/30/1/002
X. Du, M. Qin, A. Rauf, Z. Yuan, B. Yang, X. Qu, Mater.Sci. Eng. A (2008). https://doi.org/10.1016/j.msea.2008.05.027
Q. Li, Z. Wang, C. Wu, Cheng, Xin, J. Alloy. Compd. (2015). https://doi.org/10.1016/j.jallcom.2015.03.235
J.-X. Zhang, Z.-R. Huang, D.-L. Jiang, S.H. Tan, Z. Shen, M. Nygren, J. Am. Ceram. Soc. (2002). https://doi.org/10.1111/j.1151-2916.2002.tb00234.x
W. Kim, J.-S. Park, S.-W. Cho, N.-R. Kim, I.-Y. Ko, I.-J. Shon, Properties and rapid consolidation of binderless titanium nitride by pulsed current activated sintering. J. Ceram. Process. Res. 11, 627–630 (2010)
O.N. Grigor’ev, T.V. Mosina, N.P. Brodnikovskii, Refract. Ind. Ceram. (2001). https://doi.org/10.1023/A:1014006327090
S. Kume, I. Yamada, K. Watari, I. Harada, K. Mitsuishi, J. Am. Ceram. Soc. (2009). https://doi.org/10.1111/j.1551-2916.2008.02650.x
J. Martan, P. Beneš, Thermochim. Acta (2012). https://doi.org/10.1016/j.tca.2012.03.029
K. Watari, H. Nakano, K. Urabe, K. Ishizaki, S. Cao, K. Mori, J. Mater. Res. (2002). https://doi.org/10.1557/JMR.2002.0426
G.P. Srivastava, The Physics of Phonons (Adam Hilger, Bristol, 1990)
H.O. Pierson, Handbook of Refractory Carbides and Nitrides: Properties, Characteristics, Processing (Noyes Publications, Westwood, 1996)
W. Zhou, Thermochim. Acta. (2011). https://doi.org/10.1016/j.tca.2010.10.003
Acknowledgements
The authors would like to thank Dr. V.P. Filonenko of Institute for High Pressure Physics and Russian Academy of Sciences for HPHT-treated samples. The reported study was funded by RFBR according to the research project no. 18-33-01136.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kudyakova, V.S., Chukin, A.V., Dorokhin, M.V. et al. Structure, microhardness and thermal conducting properties of the high-pressure high-temperature-treated Al–Ti–N materials. Appl. Phys. A 125, 123 (2019). https://doi.org/10.1007/s00339-019-2415-1
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-019-2415-1