Abstract
The localized corrosion behaviors of SiCp/Al composites in 3.5% NaCl solution were in-situ investigated by the scanning micro-reference electrode technique. The results show that pitting is a predominant corrosion mechanism in these composites. Hydrolysis of Al4C3 at the interface of the composites is responsible for the first stage of the pitting attack. It was found that metastable pits were re-passivated by the corrosion products of Al(OH)2Cl and Al(OH)Cl2, and the propagation of metastable pits is related to the formation of AlCl3. In addition, a pitting mechanism for the composites is proposed.
Similar content being viewed by others
References
D.K. Koli, G. Agnihotri, R. Purohit, Advanced aluminium matrix composites: the critical need of automotive and aerospace engineering fields. Mater. Today 2, 3032–3041 (2015)
L. Zhang, F. Qiu, J. Wang et al., Microstructures and mechanical properties of the Al2014 composites reinforced with bimodal sized SiC particles. Mater. Sci. Eng. A 637, 70–74 (2015)
L. Zhang, H. Xu, Z. Wang et al., Mechanical properties and corrosion behavior of Al/SiC composites. J. Alloys Compd. 678, 23–30 (2016)
I. Gurrappa, V.V.B. Prasad, Corrosion characteristics of aluminium based metal matrix composites. Mater. Sci. Technol. 22(22), 115–122 (2013)
S. Mosleh-Shirazi, F. Akhlaghi, D. Li, Effect of SiC content on dry sliding wear, corrosion and corrosive wear of Al/SiC nanocomposites. Trans. Nonferrous Met. Soc. China 26(7), 1801–1808 (2016)
R.T. Loto, A. Adeleke, Corrosion of aluminum alloy metal matrix composites in neutral chloride solutions. J. Fail. Anal. Prevent. 16, 874–885 (2016)
M. Montoya-Dávila, M.I. Pech-Canul, M.A. Pech-Canul, Effect of SiCp multimodal distribution on pitting behavior of Al/SiCp composites prepared by reactive infiltration. Powder Technol. 195, 196–202 (2009)
E. Darmiani, I. Danaee, M.A. Golozar et al., Corrosion investigation of Al–SiC nano-composite fabricated by accumulative roll bonding (ARB) process. J. Alloys Compd. 552, 31–39 (2013)
A. Pardo, M.C. Merino, S. Merino, et al. Influence of reinforcement proportion and matrix composition on pitting corrosion behaviour of cast aluminium matrix composites (A3xx.x/SiCp). Corros. Sci. 47, 1750–1764 (2005)
K.K. Alaneme, T.M. Adewale, P.A. Olubambi, Corrosion and wear behaviour of Al–Mg–Si alloy matrix hybrid composites reinforced with rice husk ash and silicon carbide. J. Mater. Res. Technol. 3, 9–16 (2014)
J. Lee, J. Ahn, J. Shim, et al., Control of the interface in SiC/Al composites. Scripta Mater. 41, 895–900 (1999)
H.M. Zakaria, Microstructural and corrosion behavior of Al/SiC metal matrix composites. Ain Shams Eng. J. 5 831–838 (2014)
Y. Zou, J. Wang, Q. Bai et al., Potential distribution characteristics of mild steel in seawater. Corros. Sci. 57, 202–208 (2012)
V. Upadhyay, D. Battocchi, Localized electrochemical characterization of organic coatings: a brief review. Prog. Org. Coat. 99, 365–377 (2016)
C. Ye, R. Hu, Y. Li et al., Probing the vertical profiles of potential in a thin layer of solution closed to electrode surface during localized corrosion of stainless steel. Corros. Sci. 61, 242–245 (2012)
H. Xu, Y. Liu, W. Chen, et al., Corrosion behavior of reinforcing steel in simulated concrete pore solutions: a scanning micro-reference electrode study. Electrochim. Acta 54, 4067–4072 (2009)
C.J. Lin, T.J. Nguyen, R.G. Du, In-situ imaging of chloride ions at the metal/solution interface by scanning combination microelectrodes. Corrosion 56, 41–47 (2000)
Z. Ahmad, Corrosion behavior of a discontinuously reinforced composite in salt water environment. J. Reinf. Plast. Compos. 25 1507–1523 (2006)
S.V. Nair, J.K. Tien, R.C. Bates, SiC-reinforced aluminum metal matrix composites. Int. Mater. Rev. 30, 275–290 (1984)
B. Xiong, Z. Xu, Q. Yan, et al., Effects of SiC volume fraction and aluminum particulate size on interfacial reactions in SiC nanoparticulate reinforced aluminum matrix composites. J. Alloys Compd. 509, 1187–1191 (2011)
C.H. Huang, L. Chen, C.L. Yang, Effect of anions on electrochemical coagulation for cadmium removal. Sep. Purif. Technol. 65, 137–146 (2009)
K.C. Emregül, A.A. Aksüt, The effect of sodium molybdate on the pitting corrosion of aluminum. Corros. Sci. 45, 2415–2433 (2003)
T.H. Nguyen, R.T. Foley, The chemical nature of aluminum corrosion III. The dissolution mechanism of aluminum oxide and aluminum powder in various electrolytes. J. Electrochem. Soc. 127(12), 2563–2566 (1980)
C. Dong, K. Xiao, L. Xu et al., Characterization of 7A04 aluminum alloy corrosion under atmosphere with chloride ions using electrochemical techniques. Rare Met. Mater. Eng. 40(2), 275–279 (2011)
S.T. Pride, J.R. Scully, J.L. Hudson, Metastable pitting of aluminum and criteria for the transition to stable pit growth. J. Electrochem. Soc. (United States) 141(11), 3028–3040 (1994)
Acknowledgements
The authors would like to thank Professor C. J. Lin for his technical assistance during the SMRE tests performed at the Chemistry Department, College of Chemistry and Chemical Engineering, Xiamen University, China. This work is supported by the National Natural Science Foundation of China (Grant Nos. 51262023 and 51501164) and Key Laboratory of Inorganic function material and device, Chinese Academy of Sciences (Grant No. KLIFMD-2015-05).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Cui, X., Zhou, X., Ouyang, D. et al. In-situ localized corrosion behavior of SiCp/Al composites in 3.5% NaCl aqueous solution. Appl. Phys. A 124, 75 (2018). https://doi.org/10.1007/s00339-017-1488-y
Received:
Accepted:
Published:
DOI: https://doi.org/10.1007/s00339-017-1488-y