Abstract
The impact strength of Nylon 6 can be further improved by blending it with ethylene-butyl acrylate-maleic anhydride elastomer. The blending is achieved in solution phase. Due to incompatibility of Nylon 6 and the elastomer, a special mixture of solvents is used to dissolve both components. The solution is electrospun, and the effects of the process parameters on the expected radii of nanofibers are investigated. The effects of process parameters such as polymer concentration in solution, electrical field, diameter of the syringe needle, feed rate, and collector geometry on nanofibers were investigated. Statistical analysis is carried out using the Johnson SB distribution. A relation is proposed to relate the effect of the process parameters feed rate, electrical voltage, and tip to collector distance on the expected diameter of fibers. It is found that concentration and electrical field have a profound effect on the diameter of fibers compared to those of the syringe diameter and feed rate.
Similar content being viewed by others
References
Z.-M. Huang, Y.Z. Zhang, M. Kotaki, S. Ramakrishna, A review on polymer nanofibers by electrospinning and their applications in nanocomposites. Compos. Sci. Technol. 63(15), 2223–2253 (2003)
S. Ramakrishna, An Introduction to Electrospinning and Nanofibers (World Scientific, New Jersey, 2005)
A. Koski, K. Yim, S. Shivkumar, Effect of molecular weight on fibrous PVA produced by electrospinning. Mater. Lett. 58(3–4), 493–497 (2004)
S. Wongsasulak, K.M. Kit, D.J. McClements, T. Yoovidhya, J. Weiss, The effect of solution properties on the morphology of ultrafine electrospun egg albumen-PEO composite fibers. Polymer 48(2), 448–457 (2007)
H.-W. Tong, M. Wang, Effects of processing parameters on the morphology and size of electrospun PHBV micro- and nano-fibers. Key Eng. Mater. 334–335(II), 1233–1236 (2007)
J. Macossay, A. Marruffo, R. Rincon, T. Eubanks, A. Kuang, Effect of needle diameter on nanofiber diameter and thermal properties of electrospun poly(methyl methacrylate). Polym. Adv. Technol. 18(3), 180–183 (2007)
A. Theron, E. Zussman, A.L. Yarin, Electrostatic field-assisted alignment of electrospun nanofibres. Nanotechnology 3, 384 (2001)
K.-H. Lee, K.-W. Kim, A. Pesapane, H.-Y. Kim, J.F. Rabolt, Polarized FT-IR study of macroscopically oriented electrospun Nylon-6 nanofibers. Macromolecules 41(4), 1494–1498 (2008)
K. Jun, H.G. Craighead, Fabrication of oriented polymeric nanofibers on planar surfaces by electrospinning. Appl. Phys. Lett. 83(2), 371–373 (2003)
A.T. Allen, Particle Size Measurement (Springer, Berlin, 1997)
Q. Li, Y. Yang, Z. Jia, Z. Guan, Experimental investigation of the effect of processing parameters on the formation of electrospun polyethylene oxide nanofibers. Gaodianya Jishu/High Volt. Eng. 33(2), 186–189 (2007)
O.O. Dosunmu, G.G. Chase, W. Kataphinan, D.H. Reneker, Electrospinning of polymer nanofibres from multiple jets on a porous tubular surface. Nanotechnology 17(4), 1123–1127 (2006)
M.R. Flynn, The 4-parameter lognormal (SB) model of human exposure. Ann. Occup. Hyg. 48(7), 617–622 (2004)
Y. Ai-Bing, Johnson’s SB distribution function as applied in the mathematical representation of particle size distributions. Part 2: Application of numerical results. Part. Part. Syst. Char. 11(5), 367–374 (1994)
N.L. Johnson, Systems of curves generated by methods of translation. Biometrika 36(1–2), 149–176 (1949)
M.R. Flynn, On the moments of the 4-parameter lognormal distribution. Commun. Stat. Theory Methods 34(4), 745–751 (2005)
Z. Jian-Feng, Y. Dong-Zhi, N. Jun, Effect of electric potential and coulombic interactions on electrospinning nanofiber distribution. Polym. Int. 57(10), 1194–1197 (2008)
R.P. Feynman, R.B. Leighton, M. Sands, The Feynman Lectures on Physics (Addison–Wesley, Reading, 1964)
E. Zhmayev, H. Zhou, Y.L. Joo, Modeling of non-isothermal polymer jets in melt electrospinning. J. Non-Newton. Fluid Mech. 153(2–3), 95–108 (2008)
Y.-H. He, Y. Jian-Yong, Allometric scaling and instability in electrospinning. Int. J. Nonlinear Sci. Numer. Simul. 5(3), 243–252 (2004)
E. Biber, G. Gündüz, B. Mavis, U. Colak, Compatibility analysis of Nylon 6 and poly (ethylene-n-butyl acrylate-maleic anhydride) elastomer blends using isothermal crystallization kinetics. Mater. Chem. Phys. (2010, under review)
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Biber, E., Gündüz, G., Mavis, B. et al. Effects of electrospinning process parameters on nanofibers obtained from Nylon 6 and poly (ethylene-n-butyl acrylate-maleic anhydride) elastomer blends using Johnson SB statistical distribution function. Appl. Phys. A 99, 477–487 (2010). https://doi.org/10.1007/s00339-010-5559-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-010-5559-6