Skip to main content
Log in

Various photonic crystal structures fabricated by using a top-cut hexagonal prism

  • Published:
Applied Physics A Aims and scope Submit manuscript

Abstract

We demonstrate a holographic approach for the fabrication of large-area photonic crystal (PhC) microstructures by applying a single top-cut hexagonal prism (TCHP). The interference patterns of the beams from the TCHP are calculated. Various two-dimensional PhC structures are fabricated in photo-resist films. They include symmetrical hexagonal structures, the honey-comb structure and the hexagonal structure with skewed elliptical rods. The first structures come from six-beam and symmetrical three-beam interfering. The second structure appears when the beam is incident on the TCHP obliquely. The third structure is obtained when adjacent three beams or four beams are interfered. The period can be decreased to 285 nm. SPM observations of the PhCs provide the basis for measurement of their structural parameters. A good agreement is obtained for the measured structural parameters and calculated results for the PhCs. The photonic band gaps of the hexagonal symmetrical and honeycomb structures are derived by using the plane wave method. These results reveal that, by varying the number of split beams and the incident angle, using the single TCHP PhCs, different band gaps can be achieved.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Similar content being viewed by others

References

  1. J.D. Joannopoulos, P.R. Villeneuve, S. Fan, Photonic crystals: putting a new twist on light. Nature 386, 143–149 (1997)

    Article  ADS  Google Scholar 

  2. T.F. Krauss, R.M. De La Rue, Photonic crystals in the optical regime—past, present and future. Prog. Quantum Electron. 23, 51–96 (1999)

    Article  ADS  Google Scholar 

  3. C.C. Cheng, A. Scherer, R. Tyan, Y. Fainman, G. Witzgall, E. Yablonovitch, New fabrication techniques for high quality photonic crystals. J. Vac. Sci. Technol. B 15(6), 2764–2767 (1997)

    Article  Google Scholar 

  4. A. Blaaderen Van, R. Ruel, P. Wiltzius, Template-directed colloidal crystallization. Nature 385(23), 321–324 (1997)

    Article  ADS  Google Scholar 

  5. M.C. Wanke, O. Lehmann, K. Müller, Q. Wen, M. Stuke, Laser rapid prototyping of photonic band-gap microstructures. Science 275(5304), 1284–1286 (1997)

    Article  Google Scholar 

  6. B.H. Cumpston, S.P. Ananthavel, S. Barlow, D.L. Dyer, J.E. Ehrlich, L.L. Erskine, A.A. Heikal, S.M. Kuebler, I.Y.S. Lee, D. McCord-Maughon, J. Qin, H. Röckel, M. Rumi, X.L. Wu, S.R. Marder, J.W. Perry, Two-photon polymerization initiators for three-dimensional optical data storage and microfabrication. Nature 398, 51–54 (1999)

    Article  ADS  Google Scholar 

  7. S. Maruo, O. Nakamura, S. Kawata, Three-dimensional microfabrication with two-photon-absorbed photopolymerization. Opt. Lett. 22(2), 132–134 (1997)

    Article  ADS  Google Scholar 

  8. R.A. Borisov, G.N. Dorojkina, N.I. Koroteev, V.M. Kozenkov, S.A. Magnitskii, D.V. Malakhov, A.V. Tarasishin, A.M. Zheltikov, Fabrication of three-dimensional periodic microstructures by means of two-photon polymerization. Appl. Phys. B 67(6), 765–767 (1998)

    Article  ADS  Google Scholar 

  9. J.G. Deng, X.M. Tao, P. Li, P. Xue, Y.H. Zhang, X.H. Sun, K.C. Kwan, A simple self-assembly method for colloidal photonic crystals with a large area. J. Colloid Interface Sci. 286(2), 573–578 (2005)

    Article  Google Scholar 

  10. M. Campbell, D.N. Sharp, M.T. Harrison, R.G. Denning, A.J. Turberfield, Fabrication of photonic crystals for the visible spectrum by holographic lithography. Nature 404(6773), 53–56 (2000)

    Article  ADS  Google Scholar 

  11. T. Kondo, S. Matsuo, S. Juodkazis, H. Misawa, Femtosecond laser interference technique with diffractive beam splitter for fabrication of three-dimensional photonic crystals. Appl. Phys. Lett. 79, 725 (2001)

    Article  ADS  Google Scholar 

  12. Y.V. Miklyaev, D.C. Meisel, A. Blanco, G.V. Freymann, K. Busch, W. Koch, C. Enkrich, M. Deubel, M. Wegener, Three-dimensional face-centered-cubic photonic crystal templates by laser holography: fabrication, optical characterization, and band-structure calculations. Appl. Phys. Lett. 82, 1284–1286 (2003)

    Article  ADS  Google Scholar 

  13. Y.K. Pang, J.C.W. Lee, H.F. Lee, W.Y. Tam, C.T. Chan, P. Sheng, Chiral microstructures (spirals) fabrication by holographic lithography. Opt. Express 13(19), 7615–7620 (2005)

    Article  ADS  Google Scholar 

  14. V. Berger, O. Gauthier-Lafaye, E. Costard, Photonic band gaps and holography. J. Appl. Phys. 82, 60–64 (1997)

    Article  ADS  Google Scholar 

  15. I. Divliansky, T.S. Mayera, K.S. Holliday, V.H. Crespi, Fabrication of three-dimensional polymer photonic crystal structures using single diffraction element interference lithography. Appl. Phys. Lett. 82, 1667–1669 (2003)

    Article  ADS  Google Scholar 

  16. G.P. Wang, C.L. Tan, Y.X. Yi, H. Shan, Holography for one-step fabrication of three- dimensional metallodielectric photonic crystals with a single continuous wavelength laser beam. J. Mod. Opt. 50, 2155–2161 (2003)

    ADS  Google Scholar 

  17. L. Wu, Y. Zhong, C.T. Chan, K.S. Wong, G.P. Wang, Fabrication of large area two- and three-dimensional polymer photonic crystals using single refracting prism holographic lithography. Appl. Phys. Lett. 86, 241102–241104 (2005)

    Article  ADS  Google Scholar 

  18. Y. Yang, G.P. Wang, J. Xie, S. Zhang, Metal nanoparticles-embedded three-dimensional microstructures created by single-beam holography. Appl. Phys. Lett. 86, 173108–173110 (2005)

    Article  ADS  Google Scholar 

  19. L.J. Wu, Y.C. Zhong, K.S. Wong, G.P. Wang, L. Yuan, Fabrication of hetero-binary and honeycomb photonic crystals by one-step holographic lithography. Appl. Phys. Lett. 88, 091115–091117 (2006)

    Article  ADS  Google Scholar 

  20. X. Wang, J. Xu, J.C.W. Lee, Y.K. Pang, W.Y. Tam, C.T. Chan, P. Sheng, Realization of optical periodic quasicrystals using holographic lithography. Appl. Phys. Lett. 88, 051901–051903 (2006)

    Article  ADS  Google Scholar 

  21. X.H. Sun, X.M. Tao, T.J. Ye, Y.S. Szeto, X.Y. Cheng, Diffraction measurement and analysis of slanted holographic polymer dispersed liquid crystal. J. Appl. Phys. 98, 043510–043514 (2005)

    Article  ADS  Google Scholar 

  22. X.H. Sun, X.M. Tao, T.J. Ye, P. Xue, Y.S. Szeto, Optical design and fabrication of 3D electrically switchable hexagonal photonic crystal. Appl. Phys. B: Lasers Opt. 87(1), 65–69 (2007)

    Article  ADS  Google Scholar 

  23. X. Sun, X. Tao, T. Ye, P. Xue, Y.-S. Szeto, 2D and 3D electrically switchable hexagonal photonic crystal in the ultraviolet range. Appl. Phys. B: Lasers Opt. 87(2), 267–272 (2007)

    Article  ADS  Google Scholar 

  24. S.P. Guo, S. Albin, Simple plane wave implementation for photonic crystal calculations. Opt. Express 11, 167–175 (2003)

    Article  ADS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to X. M. Tao.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Sun, X.H., Tao, X.M. & Wang, Y.Y. Various photonic crystal structures fabricated by using a top-cut hexagonal prism. Appl. Phys. A 98, 255–261 (2010). https://doi.org/10.1007/s00339-009-5414-9

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00339-009-5414-9

PACS

Navigation