Abstract
The type and extent of residual stresses within laser surface modified alumina ceramic were investigated. Macro stresses were predicted with the help of the OOF2 simulation package, developed at the National Institute of Standards and Technology. The software utilizes a meshing technique to discretize the surface microstructure into a mesh suitable for finite-element analysis, which leads to stress determination. Micro stresses were estimated by the prediction of full width at half-maximum of the peaks from the X-ray diffraction patterns of processed samples. Under the present set of laser processing parameters, the ceramic was devoid of any major cracks, making it ideal for several applications. This study provides a tool for rapid evaluation and hence for controlling the stresses through tailoring the laser process parameters to suit a particular application.
Similar content being viewed by others
References
T. Maiman, Nature (London) 187, 493 (1960)
P. Kadolkar, T. Watkins, J. De Hosson, B. Kooi, N. Dahotre, Acta Mater. 55, 1203 (2007)
P. Tehrani, L. Hector, R. Hetnarski Jr., M. Eslami, Trans. ASME 68, 480 (2001)
A. Zhang, Q. He, L. Guo, J. Polym. Sci. B 42, 3759 (2004)
A. Solina, M. de Sanctis, L. Paganini, P. Coppa, J. Heat Treat. 4, 272 (1986)
K. Dai, L. Shaw, Acta Mater. 49, 4171 (2001)
U. De Oliveira, V. Ocelík, J. De Hosson, Surf. Coat. Technol. 201, 6363 (2007)
J. Lawrence, L. Li, J. Spencer, Opt. Laser Technol. 30, 205 (1998)
J. Lawrence, L. Li, J. Spencer, Opt. Laser Technol. 30, 215 (1998)
J. Lawrence, L. Li, J. Laser Appl. 12, 116 (2000)
R. Chin, J. Beuth, C. Amon, Mech. Mater. 24, 257 (1996)
K. Dai, L. Shaw, Acta Mater. 52, 69 (2004)
C. Amon, J. Beuth, R. Merz, F. Prinz, L. Weiss, ASME J. Manuf. Sci. Eng. 120, 656 (1998)
P. Michlik, C. Berndt, Surf. Coat. Technol. 201, 2369 (2006)
A. Kulkarni, Z. Wang, T. Nakamura, S. Sampath, A. Goland, H. Herman, J. Allen, J. Ilavsky, G. Long, J. Frahm, R. Steinbrech, Acta Mater. 51, 2457 (2003)
Z. Wang, A. Kulkarni, S. Deshpande, T. Nakamura, H. Herman, Acta Mater. 51, 5319 (2003)
V. Vedula, S. Glass, D. Saylor, G. Rohrer, W. Carter, S. Langer, E. Fuller Jr., J. Am. Ceram. Soc. 84, 2947 (2001)
C. Hsueh, J. Haynes, M. Lance, P. Becher, M. Ferber, E.R. Fuller, S.A. Langer, W.C. Carter, W.R. Cannon, J. Am. Ceram. Soc. 82, 1073 (1999)
A. Zimmermann, W. Carter, E. Fuller, Acta Mater. 49, 127 (2001)
J. Ares, A. Pascual, I. Ferrer, C. Sánchez, Thin Solid Films 480–481, 477 (2005)
M. Čerňanský, N. Ganev, J. Barcal, J. Drahokoupil, K. Kolařík, Z. Kristallogr. 23, 369 (2006)
S. Harimkar, N. Dahotre, Adv. Appl. Ceram. 105, 304 (2006)
S. Langer, W. Carter, E. Fuller Jr., OOF (NIST, Gaithersburg, MD, 1997)
S. Harimkar, N. Dahotre, J. Appl. Phys. 100, 024901 (2006)
A. Khangar, E. Kenik, N. Dahotre, Ceram. Int. 31, 621 (2005)
W. Gitzen, Alumina as a Ceramic Material (The American Ceramic Society, Westerville, OH, 1970)
S. Harimkar, N. Dahotre, Phys. Stat. Solidi A 204, 1105 (2007)
S. Harimkar, N. Dahotre, Int. J. Appl. Ceram. Technol. 3, 375 (2006)
T. Zhdanova, O. Smishchenko, I. Morgin, O. Borushko, R. Khodakovskaya, Glass Ceram. 42, 446 (1985)
S. Harimkar, A. Samant, N. Dahotre, J. Appl. Phys. 101, 054911 (2007)
A. Saigal, E. Fuller Jr., Comput. Mater. Sci. 21, 149 (2001)
A. Jadhav, N. Padture, E. Jordan, M. Gell, P. Miranzo, E. Fuller Jr., Acta Mater. 54, 3343 (2006)
C. Suryanarayana, M.G. Norton, X-Ray Diffraction – A Practical Approach (Plenum, New York, 1998)
S. Harimkar, A. Samant, A. Khangar, N. Dahotre, J. Phys. D Appl. Phys. 39, 1642 (2006)
S. Albert, G. Schajer, Surface Engineering (ASM Handb. 5) (ASM, Materials Park, OH, 1998)
L. Katipelli, A. Agarwal, N. Dahotre, Mater. Sci. Eng. A 289, 34 (2000)
M. Seabaugh, I. Kerscht, G. Messing, J. Am. Ceram. Soc. 80, 1181 (1997)
P. Sedek, J. Brozda, L. Wang, P. Withers, Int. J. Pressure Vessels Piping 80, 705 (2003)
B. Bhushan, B. Gupta, Handbook of Tribology (Materials, Coatings and Surface Treatments) (McGraw-Hill, New York, 1991)
L. Bradley, L. Li, F. Stott, Appl. Surf. Sci. 138–139, 233 (1999)
R. Carlson, G. Kardomateas, An Introduction to Fatigue in Metals and Composites (Chapman & Hall, London, 1996)
L. Nielsen, J. Am. Ceram. Soc. 67, 93 (1984)
P. Puri, S. Cowin, J. Elasticity 15, 167 (1985)
J. Zhang, M. Gungor, E. Lavernia, J. Mater. Sci. 28, 1515 (1993)
M. Kearns, P. Blenkinsop, A. Barber, T. Farthing, Int. J. Powder Metall. 24, 59 (1988)
Author information
Authors and Affiliations
Corresponding author
Additional information
PACS
61.30.Hn; 81.40.-z; 81.05.Je; 79.20.Ds
Rights and permissions
About this article
Cite this article
Samant, A., Dahotre, N. Multilevel residual stress evaluation in laser surface modified alumina ceramic. Appl. Phys. A 90, 493–499 (2008). https://doi.org/10.1007/s00339-007-4311-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-007-4311-3