Abstract
A self-assembly monolayer (SAM) selected from alkyl- and phenyl-silanes was inserted between polyfluorene (PFO) and indium–tin oxide (ITO). The relative changes in adhesion energy of PFO/SAM/ITO were semi-quantitatively measured. These relative changes are calculated by dividing the gains in adhesion energy by the adhesion energy of PFO/ITO with no SAM. The values for five alkyl-silanes with varying chain lengths are in the range of 1.0±0.2 to 1.8±0.5, and those for five selected phenyl-silanes are 1.8±0.5 to 4.1±1.1. Phenyl-silanes with a unit larger than that of benzene, together with appropriate tail-group functionality, give the best enhancement in adhesion.
Similar content being viewed by others
References
C.K. Chiang, C.R. Fincher Jr., Y.W. Park, A.J. Heeger, H. Shirakawa, E.J. Louis, S.C. Gau, A.G. MacDiarmid, Phys. Rev. Lett. 39, 1098 (1977)
H.S. Nalwa, Conducting polymers, in Handbook of Advanced Electronic and Photonic Materials and Devices, vol. 8 (Academic, San Diego, CA, 2001), chapt. 4
H.S. Nalwa, Light-emitting diodes, lithium batteries and polymer devices, in Handbook of Advanced Electronic and Photonic Materials and Devices, vol. 8 (Academic, San Diego, CA, 2001), chapt. 5
D.E. Packmann, Handbook of Adhesion (Longman Scientific and Technical, Avon, UK, 1992)
K.L. Mittal, H.R. Anderson Jr., Acid–Base Interactions: Relevance to Adhesion Science and Technology (VSP, Zeist, The Netherlands, 1991)
K.W. Wong, H.L. Yip, Y. Luo, K.Y. Wong, W.M. Lau, K.H. Low, H.F. Chow, Z.Q. Gao, W.L. Yeung, C.C. Chang, Appl. Phys. Lett. 80, 2788 (2002)
B. Choi, J. Rhee, H.H. Lee, Appl. Phys. Lett. 79, 2109 (2001)
H. Yan, Q.L. Huang, J. Cui, J.G.C. Veinot, M.M. Kern, T.J. Marks, Adv. Mater. 15, 835 (2003)
C.C. Hsiao, C.H. Chang, M.C. Hung, N.J. Yang, S.A. Chen, Appl. Phys. Lett. 86, 223505 (2005)
H. Yan, P. Lee, N.R. Armstrong, A. Graham, G.A. Evmenenko, P. Dutta, T.J. Marks, J. Am. Chem. Soc. 127, 3172 (2005)
Y.D. Park, D.H. Kim, Y. Jang, M. Hwang, J.A. Him, K. Cho, Appl. Phys. Lett. 87, 243509 (2005)
G. Ramanath, G. Cui, P.G. Ganesan, X. Guo, A.V. Ellis, M. Stukowski, K. Vijayamohanan, P. Doppelt, M. Lane, Appl. Phys. Lett. 83, 383 (2003)
N. Lee, S. Choi, S. Kang, Appl. Phys. Lett. 88, 073101 (2006)
J.H. Cho, J.A. Lim, J.T. Han, H.W. Jang, J.L. Lee, K. Cho, Appl. Phys. Lett. 86, 171906 (2005)
P. Gallo, B. Viallet, E. Daran, C. Fontaine, Appl. Phys. Lett. 87, 183111 (2005)
J.H. Cho, Y.D. Park, D.H. Kim, W.K. Kim, H.W. Jang, J.L. Lee, K. Cho, Appl. Phys. Lett. 88, 102104 (2006)
M.L. Jenkins, R.H. Dauskardt, J.C. Bravman, J. Adhes. Sci. Technol. 18, 1497 (2004)
ASTM Standard D3359-97, American Society for Testing and Materials, Philadelphia, PA (1997)
Manual for QTEST QT/1L universal loading machine, MTS Systems Corporation, Eden Prairie, MN (1998)
E. Breslauer, T. Troczynski, Mater. Sci. Eng. A 302, 168 (2001)
T. Okamatsu, Y. Yasuda, M. Ochi, J. Appl. Polym. Sci. 80, 1920 (2001)
L. Kogut, K. Komvopoulos, J. Appl. Phys. 94, 6386 (2003)
Author information
Authors and Affiliations
Corresponding author
Additional information
PACS
61.30.Hn; 61.82.Pv; 62.20.-x; 68.35.-p; 68.35.Np
Rights and permissions
About this article
Cite this article
Wong, K., Sin, L., Yeung, M. et al. Molecular interfacial engineering of adhesion between polyfluorene and indium–tin oxide. Appl. Phys. A 87, 23–26 (2007). https://doi.org/10.1007/s00339-007-3876-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00339-007-3876-1