Skip to main content
Log in

Design of a novel PEBA/CDs polymeric fibrous composite nanostructure in order to remove navicula algal and improve the quality of drinking water

  • Original Paper
  • Published:
Polymer Bulletin Aims and scope Submit manuscript

Abstract

Due to the importance of quality of drinking water, in this study, cyclodextrin (CDs), polyether block amide (PEBA) and PEBA/CDs polymeric fibrous membranes were synthesized by cost-effective, environmentally friendly and effective electrospinning method. Different techniques such as Fourier transform infrared spectroscopy, X-ray diffraction patterns, scanning electron microscopy and nitrogen adsorption/desorption technique were used to characterize the physicochemical properties of the membrane samples. Uniform morphology, mesoporous diameter and high surface area (453 m2/g) showed that PEBA/CDs polymer nanofibrous membrane can be used as a new candidate to remove taste and smell from drinking water. The effect of contact time, volume of water and nanomembranes dosage on the removal of Navicula algal was investigated. The highest inactivation efficiency of Navicula algal at 70 mL water was achieved under 7 min contact time when 0.3 mg of nanomembranes was used. The results showed that the nanomembranes developed in this study can be reduced the number of algal colonies by five colonies, which is significant compared to previous studies. It seems that the use of new nanostructures as well as the synthesis method developed in this study has a great effect on the performance of these samples to reduce the number of Navicula-colonies and anti-algal effects.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12

Similar content being viewed by others

References

  1. Lee J, Rai PK, Jeon YJ, Kim K-H, Kwon EE (2017) The role of algae and cyanobacteria in the production and release of odorants in water. Environ Pollut 227:252–262

    CAS  PubMed  Google Scholar 

  2. Li L-H, Li X-Y, Hong Y, Jiang M-R, Lu S-L (2020) Use of microalgae for the treatment of black and odorous water: Purification effects and optimization of treatment conditions. Algal Res 47:101851

    Google Scholar 

  3. M. Al-Jbory, I. Al-Mayaly 2019 Evaluation of the Activity of the Diatom Navicula Incerta Cultivated in Different Environments Against Several Species of Pathogenic Bacteria, Iraqi Journal of Science. 486–493

  4. Emam HE, Saad NM, Abdallah AE, Ahmed HB (2020) Acacia gum versus pectin in fabrication of catalytically active palladium nanoparticles for dye discoloration. Int J Biol Macromol 156:829–840

    CAS  PubMed  Google Scholar 

  5. Sargazi G, Ebrahimi AK, Afzali D, Badoei-dalfard A, Malekabadi S, Karami Z (2019) Fabrication of PVA/ZnO fibrous composite polymer as a novel sorbent for arsenic removal: design and a systematic study. Polym Bull 76:5661–5682

    CAS  Google Scholar 

  6. Tan X, Rodrigue D (2019) A review on porous polymeric membrane preparation Part I: production techniques with polysulfone and poly (vinylidene fluoride). Polymers 11:1160

    PubMed Central  Google Scholar 

  7. Ahmed HB, Emam HE (2019) Synergistic catalysis of monometallic (Ag, Au, Pd) and bimetallic (AgAu, AuPd) versus Trimetallic (Ag-Au-Pd) nanostructures effloresced via analogical techniques. J Mol Liq 287:110975

    CAS  Google Scholar 

  8. Yang Z, Zhou Y, Feng Z, Rui X, Zhang T, Zhang Z (2019) A review on reverse osmosis and nanofiltration membranes for water purification. Polymers 11:1252

    CAS  PubMed Central  Google Scholar 

  9. Fathizadeh M, Tien HN, Khivantsev K, Chen J-T, Yu M (2017) Printing ultrathin graphene oxide nanofiltration membranes for water purification. J Mater Chem A 5:20860–20866

    CAS  Google Scholar 

  10. Gould S, Scott RC (2005) 2-Hydroxypropyl-β-cyclodextrin (HP-β-CD): a toxicology review. Food Chem Toxicol 43:1451–1459

    CAS  PubMed  Google Scholar 

  11. Mostafa KM, Samarkandy AR, El-Sanabary A (2009) Preparation of poly (MAA)-crosslinked pregelled starch graft copolymer and its application in waste water treatments. J Appl Polym Sci 112:2838–2846

    CAS  Google Scholar 

  12. Emam HE, Ahmed HB, Gomaa E, Helal MH, Abdelhameed RM (2020) Recyclable photocatalyst composites based on Ag 3 VO 4 and Ag 2 WO 4@ MOF@ cotton for effective discoloration of dye in visible light. Cellulose 27:7139–7155

    CAS  Google Scholar 

  13. Emam HE (2019) Generic strategies for functionalization of cellulosic textiles with metal salts. Cellulose 26:1431–1447

    CAS  Google Scholar 

  14. Abdelhameed RM, El-Shahat M, Emam HE (2020) Employable metal (Ag & Pd)@ MIL-125-NH2@ cellulose acetate film for visible-light driven photocatalysis for reduction of nitro-aromatics. Carbohydr Polym 247:116695

    CAS  PubMed  Google Scholar 

  15. Ahmed HB, Mikhail MM, El-Sherbiny S, Nagy KS, Emam HE (2020) pH responsive intelligent nano-engineer of nanostructures applicable for discoloration of reactive dyes. J Colloid Interface Sci 561:147–161

    CAS  PubMed  Google Scholar 

  16. Mostafa KM, Samarkandy AR, El-Sanabary A (2010) Removal of basic dyes from aqueous medium using novel poly (MAA)-cross linked pregelled starch graft copolymer. J Appl Polym Sci 118:2728–2735

    CAS  Google Scholar 

  17. Abdelhameed RM, Abdel-Gawad H, Emam HE (2021) Macroporous Cu-MOF@ cellulose acetate membrane serviceable in selective removal of dimethoate pesticide from wastewater. J Environ Chem Eng 9:105121

    CAS  Google Scholar 

  18. Ding T, Yang M, Zhang J, Yang B, Lin K, Li J, Gan J (2017) Toxicity, degradation and metabolic fate of ibuprofen on freshwater diatom Navicula sp. J Hazard Mater 330:127–134

    CAS  PubMed  Google Scholar 

  19. C. Radhakrishnan, S. Pardhi, M. Kulikovskiy, J.P. Kociolek, B. Karthick, Navicula watveae sp. 2020 nov.(Bacillariophyceae) a new diatom species from the Western Ghats, India, Phytotaxa, 433: 20–26

  20. Mostafa KM, Samarkandy AR, El-Sanabary AA (2011) Preparation of poly (DMAEM)-cross linked pregelled starch graft copolymer and its application in waste water treatments. Carbohyd Polym 86:491–498

    CAS  Google Scholar 

  21. Mostafa KM, Samarkandy AR, El-Sanabary AA (2011) Grafting onto carbohydrate polymer using novel potassium persulfate/tetramethylethylene diamine redox system for initiating grafting. Adv Polym Technol 30:138–149

    CAS  Google Scholar 

  22. Crupi V, Ficarra R, Guardo M, Majolino D, Stancanelli R, Venuti V (2007) UV–vis and FTIR–ATR spectroscopic techniques to study the inclusion complexes of genistein with β-cyclodextrins. J Pharm Biomed Anal 44:110–117

    CAS  PubMed  Google Scholar 

  23. Wu T, Wang N, Li J, Wang L, Zhang W, Zhang G, Ji S (2015) Tubular thermal crosslinked-PEBA/ceramic membrane for aromatic/aliphatic pervaporation. J Membr Sci 486:1–9

    CAS  Google Scholar 

  24. Asghari M, Mosadegh M, Harami HR (2018) Supported PEBA-zeolite 13X nano-composite membranes for gas separation: Preparation, characterization and molecular dynamics simulation. Chem Eng Sci 187:67–78

    CAS  Google Scholar 

  25. Khandan FM, Afzali D, Sargazi G, Gordan M (2018) Novel uranyl-curcumin-MOF photocatalysts with highly performance photocatalytic activity toward the degradation of phenol red from aqueous solution: effective synthesis route, design and a controllable systematic study. J Mater Sci: Mater Electron 29:18600–18613

    CAS  Google Scholar 

  26. Emam HE, El-Shahat M, Abdelhameed RM (2021) Observable removal of pharmaceutical residues by highly porous photoactive cellulose acetate@ MIL-MOF film. J Hazard Mater 414:125509

    CAS  PubMed  Google Scholar 

  27. Wen Q, Di J, Zhao Y, Wang Y, Jiang L, Yu J (2013) Flexible inorganic nanofibrous membranes with hierarchical porosity for efficient water purification. Chem Sci 4:4378–4382

    CAS  Google Scholar 

  28. Akbarzadeh F, Motaghi M, Chauhan NPS, Sargazi G (2020) A novel synthesis of new antibacterial nanostructures based on Zn-MOF compound: design, characterization and a high performance application. Heliyon 6:e03231

    PubMed  PubMed Central  Google Scholar 

  29. Chu L, Anderson M (1996) Microporous silica membranes deposited on porous supports by filtration. J Membr Sci 110:141–149

    CAS  Google Scholar 

  30. Maher A, Sadeghi M, Moheb A (2014) Heavy metal elimination from drinking water using nanofiltration membrane technology and process optimization using response surface methodology. Desalination 352:166–173

    CAS  Google Scholar 

  31. Hoko Z, Makado PK (2011) Optimization of algal removal process at Morton Jaffray water works. Harare, Zimbabwe, Phys Chem Earth, Parts A/B/C 36:1141–1150

    Google Scholar 

  32. Jiang JQ, Kim C (2008) Comparison of algal removal by coagulation with clays and Al-based coagulants. Sep Sci Technol 43:1677–1686

    CAS  Google Scholar 

  33. Mohanambe L, Vasudevan S (2005) Structure of a cyclodextrin functionalized anionic clay: XRD analysis, spectroscopy, and computer simulations. Langmuir 21:10735–10742

    CAS  PubMed  Google Scholar 

  34. Mozaffari V, Sadeghi M, Fakhar A, Khanbabaei G, Ismail A (2017) Gas separation properties of polyurethane/poly (ether-block-amide)(PU/PEBA) blend membranes. Sep Purif Technol 185:202–214

    CAS  Google Scholar 

  35. Basu S, Agrawal AK, Jassal M (2011) Concept of minimum electrospinning voltage in electrospinning of polyacrylonitrile N N-dimethylformamide system. J Appl Polym Sci 122:856–866

    CAS  Google Scholar 

  36. Henriques C, Vidinha R, Botequim D, Borges J, Silva J (2009) A systematic study of solution and processing parameters on nanofiber morphology using a new electrospinning apparatus. J Nanosci Nanotechnol 9:3535–3545

    CAS  PubMed  Google Scholar 

  37. Rieger KA, Birch NP, Schiffman JD (2013) Designing electrospun nanofiber mats to promote wound healing–a review. J Mater Chem B 1:4531–4541

    CAS  PubMed  Google Scholar 

  38. Chang C, Limkrailassiri K, Lin L (2008) Continuous near-field electrospinning for large area deposition of orderly nanofiber patterns. Appl Phys Let 93:123111

    Google Scholar 

  39. Zargham S, Bazgir S, Tavakoli A, Rashidi AS, Damerchely R (2012) The effect of flow rate on morphology and deposition area of electrospun nylon 6 nanofiber. J Eng Fibers Fabr 7:155892501200700400

    Google Scholar 

  40. Bakar S, Fong K, Eleyas A, Nazeri M (2018) Effect of voltage and flow rate electrospinning parameters on polyacrylonitrile electrospun fibers. IOP Conf Ser Mater Sci Eng 318:012076

    Google Scholar 

  41. Acik G, Cansoy CE, Kamaci M (2019) Effect of flow rate on wetting and optical properties of electrospun poly (vinyl acetate) micro-fibers. Colloid Polym Sci 297:77–83

    CAS  Google Scholar 

  42. Rezabeigi E, Sta M, Swain M, McDonald J, Demarquette NR, Drew RA, P.M, (2017) Wood-Adams, Electrospinning of porous polylactic acid fibers during nonsolvent induced phase separation. J Appl Polym Sci. https://doi.org/10.1002/app.44862

    Article  Google Scholar 

  43. Ding T, Wang S, Yang B, Li J (2020) Biological removal of pharmaceuticals by Navicula sp. and biotransformation of bezafibrate. Chemosphere 240:124949

    CAS  PubMed  Google Scholar 

  44. Zhang Y, Wang X, Jia H, Fu B, Xu R, Fu Q (2019) Algal fouling and extracellular organic matter removal in powdered activated carbon-submerged hollow fiber ultrafiltration membrane systems. Sci Total Environ 671:351–361

    CAS  PubMed  Google Scholar 

  45. Vafajoo L, Cheraghi R, Dabbagh R, McKay G (2018) Removal of cobalt (II) ions from aqueous solutions utilizing the pre-treated 2-Hypnea Valentiae algae: equilibrium, thermodynamic, and dynamic studies. Chem Eng J 331:39–47

    CAS  Google Scholar 

  46. Tolboom SN, Carrillo-Nieves D, de Jesús Rostro-Alanis M, de la Cruz Quiroz R, Barceló D, Iqbal HM, Parra-Saldivar R (2019) Algal-based removal strategies for hazardous contaminants from the environment–A review. Sci Total Environ 665:358–366

    CAS  PubMed  Google Scholar 

  47. Mostafa KM, Samerkandy A, El-Sanabary A (2010) Graft copolymer (poly (N-vinyl formamide)–pregelled starch-graft copolymer: Synthesis and study of its properties like swelling, solubility and metal ion uptake. J Polym Res 17:889–900

    Google Scholar 

  48. Kalantari SS, Taleizadeh AA (2020) Mathematical modelling for determining the replenishment policy for deteriorating items in an EPQ model with multiple shipments. Int J Syst Sci Operations Logist 7:164–171

    Google Scholar 

  49. Chapnevis A, Güvenç İ, Njilla L, Bulut E, Optimization CT, for Outage-aware Cellular-Enabled UAVs, (2021) IEEE 93rd Vehicular Technology Conference (VTC2021-Spring). IEEE 2021:1–6

    Google Scholar 

  50. S. Arasteh, M. Mahdavi, P.N. Bideh, S. Hosseini, A. Chapnevis 2018 Security Analysis of two Key Based Watermarking Schemes Based on QR Decomposition, Electrical Engineering (ICEE), Iranian Conference on, IEEE pp. 1499–1504

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Nooshin Sajjadi.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hooman, M., Sajjadi, N., Marandi, R. et al. Design of a novel PEBA/CDs polymeric fibrous composite nanostructure in order to remove navicula algal and improve the quality of drinking water. Polym. Bull. 79, 7459–7477 (2022). https://doi.org/10.1007/s00289-021-03852-1

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00289-021-03852-1

Keywords

Navigation