Effect of pH and temperature on the release kinetics of urea from wheat-gluten membranes obtained by electrospinning
- 122 Downloads
Optimal usage of urea-based fertilizers can increase their use efficiency and reduce pollution. A new alternative for prolonged-release (PR) urea based on wheat-gluten (WG) membranes obtained by electrospinning was studied. The effect of pH and temperature on the release rate of urea and its transport mechanisms were evaluated. At pH 4, 7, and 10, the equilibration times obtained were 1, 3, and 5 h, respectively. Additionally, at a higher temperature, a larger amount of urea was released into the medium. The Ritger–Peppas model suggests that with pH 4 and pH 10, at 25 °C, there is an anomalous diffusion mechanism. On the other hand, the remainder of the release conditions tested showed a release mechanism of urea by simple diffusion. According to the results, a potential application of these wheat-gluten membranes on the release system of urea for soils with pH 7 and soil temperatures between 25 and 40 °C is proposed.
KeywordsWheat-gluten membranes Electrospinning Urea release Ritger–Peppas model
The authors greatly appreciate the economic support of CONACYT through Basic Science Project 178436, and also that of the University of Sonora. Ramón Dórame-Miranda is grateful to CONACYT for the scholarship.
Compliance with ethical standards
Conflict of interest
The authors declare they have no conflict of interest.
- 1.Xiaoyu N, Yuejin W, Zhengyan W, Lin W, Guannan Q, Lixiang Y (2013) A novel slow-release urea fertiliser: physical and chemical analysis of its structure and study of its release mechanism. Biosyst Eng 115:274–282. https://doi.org/10.1016/j.biosystemseng.2013.04.001 CrossRefGoogle Scholar
- 4.Grant CA, Wu RG, Selles F, Harker KN, Clayton GW, Bittman S, Zebarth BJ, Lupwayi NZ (2012) Crop yield and nitrogen concentration with controlled release urea and split applications of nitrogen as compared to non-coated urea applied at seeding. Field Crops Res 127:170–180. https://doi.org/10.1016/j.fcr.2011.11.002 CrossRefGoogle Scholar
- 7.Ma ZY, Jia X, Zhang GX, Hu JM, Zhang XL, Liu ZY, Wang HY, Zhou F (2013) pH-responsive controlled-release fertilizer with water retention via atom transfer radical polymerization of acrylic acid on mussel-inspired initiator. J Agric Food Chem 61:5474–5482. https://doi.org/10.1021/jf401102a CrossRefGoogle Scholar
- 11.Zhang X, Gozukara Y, Sangwan P, Gao D, Bateman S (2010) Biodegradation of chemically modified wheat gluten-based natural polymer materials. Polym Degrad Stab 95:2309–2317. https://doi.org/10.1016/j.polymdegradstab.2010.09.001 CrossRefGoogle Scholar
- 16.Castro-Enríquez DD, Rodríguez-Félix F, Ramírez-Wong B, Torres-Chávez PI, Castillo-Ortega MM, Rodríguez-Félix DE, Armenta-Villegas L, Ledesma-Osuna AI (2012) Preparation, characterization and release of urea from wheat gluten electrospun membranes. Materials 5:2903–2916. https://doi.org/10.3390/ma5122903 CrossRefGoogle Scholar
- 24.Rodriguez-Felix DE, Perez-Martinez CJ, Castillo-Ortega MM, Perez-Tello M, Romero-Garcia J, Ledezma-Perez AS, Castillo-Castro T, Rodriguez-Felix F (2012) pH-and temperature-sensitive semi-interpenetrating network hydrogels composed of poly (acrylamide) and poly (γ-glutamic acid) as amoxicillin controlled-release system. Polym Bull 68:197–207. https://doi.org/10.1007/s00289-011-0549-1 CrossRefGoogle Scholar
- 28.Kumbar SG, Aminabhavi TM (2002) Preparation and characterization of interpenetrating network beads of poly (vinyl alcohol)-grafted-poly (acrylamide) with sodium alginate and their controlled release characteristics for cypermethrin pesticide. J Appl Polym Sci 84:552–560. https://doi.org/10.1002/app.10306 CrossRefGoogle Scholar
- 33.Läuchli A, Grattan SR (2017) 8 Plant stress under non-optimal soil pH. Plant Stress Physiol 201–216Google Scholar