Abstract
By comparing the seismic wave velocity profile in the Earth with laboratory data of the sound velocity of iron alloys, we can infer the chemical composition of materials in the Earth’s core. The sound velocity of pure iron (Fe) has been sufficiently measured using various techniques, while experimental study on the sound velocity of iron–nickel (Fe–Ni) alloys is limited. Here, we measured longitudinal wave velocities of hexagonal-close-packed (hcp) structured Fe up to 29 GPa, Fe–5 wt% Ni, and Fe–15 wt% Ni up to 64 GPa via a combination of the femtosecond pulse laser pump–probe technique and a diamond anvil cell at room temperature condition. We found that the effect of Ni on the sound velocity of an Fe-based alloy is weaker than that determined by previous experimental study. In addition, we obtained the parameters of Birch’s law to be VP = 1146(57)ρ − 3638(567) for Fe–5 wt% Ni and VP = 1141(45)ρ− 3808(446) for Fe–15 wt% Ni, respectively, where VP is longitudinal wave velocity (m/s) and ρ is density (g/cm3).
Similar content being viewed by others
References
Akahama Y, Kawamura H (2004) High-pressure Raman spectroscopy of diamond anvils to 250 GPa: method for pressure determination in the multimegabar pressure range. J Appl Phys 96:3748–3751. https://doi.org/10.1063/1.1778482
Antonangeli D, Ohtani E (2015) Sound velocity of hcp-Fe at high pressure: experimental constraints, extrapolations and comparison with seismic models. Prog Earth Planet Sci 2:1–11. https://doi.org/10.1186/s40645-015-0034-9
Antonangeli D, Komabayashi T, Occelli F et al (2012) Simultaneous sound velocity and density measurements of hcp iron up to 93 GPa and 1100 K: an experimental test of the Birch’s law at high temperature. Earth Planet Sc Lett 331:210–214. https://doi.org/10.1016/j.epsl.2012.03.024
Anzellini S, Dewaele A, Mezouar M et al (2013) Melting of iron at Earth’s inner core boundary based on fast X-ray diffraction. Science 340:464–466. https://doi.org/10.1126/science.1233514
Badro J, Fiquet G, Guyot F et al (2007) Effect of light elements on the sound velocities in solid iron: implications for the composition of Earth’s core. Earth Planet Sci Lett 254:233–238. https://doi.org/10.1016/j.epsl.2006.11.025
Bass JD, Zhang JS (2015) Theory and practice: techniques for measuring high-P–T elasticity. Treatise Geophys Second Ed 293–312
Birch F (1952) Elasticity and constitution of the Earth’s interior. J Geophys Res 57:227–286. https://doi.org/10.1029/JZ057i002p00227
Caracas R (2015) The influence of hydrogen on the seismic properties of solid iron. Geophys Res Lett 42:3780–3785. https://doi.org/10.1002/2015GL063478
Decremps F, Antonangeli D, Gauthier M et al (2014) Sound velocity of iron up to 152 GPa by picosecond acoustics in diamond anvil cell. Geophys Res Lett 41:1459–1464. https://doi.org/10.1002/2013GL058859
Decremps F, Gauthier M, Ayrinhac S et al (2015) Picosecond acoustics method for measuring the thermodynamical properties of solids and liquids at high pressure and high temperature. Ultrasonics 56:129–140. https://doi.org/10.1016/j.ultras.2014.04.011
Dewaele A, Loubeyre P, Occelli F et al (2006) Quasihydrostatic equation of state of iron above 2 Mbar. Phys Rev Lett 97:215504. https://doi.org/10.1103/PhysRevLett.97.215504
Dziewonski AM, Anderson DL (1981) Preliminary reference Earth model. Phys Earth Planet Inter 25:297–356. https://doi.org/10.1016/0031-9201(81)90046-7
Elardo S, Shahar A (2017) Non-chondritic iron isotope ratios in planetary mantles as a result of core formation. Nat Geosci 10:17–321. https://doi.org/10.1038/ngeo2896
Fiquet G, Badro J, Guyot F et al (2001) Sound velocities in iron to 110 gigapascals. Science 291:468–471. https://doi.org/10.1126/science.291.5503.468
Fiquet G, Badro J, Gregoryanz E et al (2009) Sound velocity in iron carbide (Fe3C) at high pressure: implications for the carbon content of the Earth’s inner core. Phys Earth Planet Inter 172:125–129. https://doi.org/10.1016/j.pepi.2008.05.016
Guinan MW, Beshers DN (1968) Pressure derivatives of the elastic constants of α-iron to 10 kbs. J Phys Chem Solids 29:541–549. https://doi.org/10.1016/0022-3697(68)90131-5
Kamada S, Ohtani E, Fukui H et al (2014) The sound velocity measurements of Fe3S. Am Mineral 99:98–101. https://doi.org/10.2138/am.2014.4463
Kantor A, Kantor I, Kurnosov A et al (2007) Sound wave velocities of fcc Fe–Ni alloy at high pressure and temperature by mean of inelastic X-ray scattering. Phys Earth Planet Inter 164:83–89. https://doi.org/10.1016/j.pepi.2007.06.006
Li J, Fei Y (2007) Experimental constraints on core composition. Treatise on geochemistry. Elsevier, New York, pp 1–31
Lin J-F, Struzhkin VV, Sturhahn W et al (2003) Sound velocities of iron–nickel and iron-silicon alloys at high pressures. Geophys Res Lett 30:2112. https://doi.org/10.1029/2003GL018405
Lin J-F, Sturhahn W, Zhao J et al (2005) Sound velocities of hot dense iron: Birch’s law revisited. Science 308:1892–1894. https://doi.org/10.1126/science.1111724
Liu J, Dauphas N, Roskosz M et al (2017) Iron isotopic fractionation between silicate mantle and metallic core at high pressure. Nat Commun 8:14377. https://doi.org/10.1038/ncomms14377
Mao H, Wu Y, Chen L et al (1990) Static compression of iron to 300 GPa and Fe0.8Ni0.2 alloy to 260 GPa: implications for composition of the core. J Geophys Res 95:21737–21742. https://doi.org/10.1029/JB095iB13p21737
Mao W, Sturhahn W, Heinz D et al (2004) Nuclear resonant X-ray scattering of iron hydride at high pressure. Geophys Res Lett 31:L15618. https://doi.org/10.1029/2004GL020541
Mao Z, Lin J-F, Liu J et al (2012) Sound velocities of Fe and Fe–Si alloy in the Earth’s core. Proc Natl Acad Sci USA 109:10239–10244. https://doi.org/10.1073/pnas.1207086109
Martorell B, Brodholt J, Wood I et al (2013) The effect of nickel on the properties of iron at the conditions of Earth’s inner core: Ab initio calculations of seismic wave velocities of Fe–Ni alloys. Earth Planet Sci Lett 365:143–151. https://doi.org/10.1016/j.epsl.2013.01.007
Ohtani E, Shibazaki Y, Sakai T et al (2013) Sound velocity of hexagonal close-packed iron up to core pressures. Geophys Res Lett 40:5089–5094. https://doi.org/10.1002/grl.50992
Prescher C, Dubrovinsky L, Bykova E et al (2015) High Poisson’s ratio of Earth’s inner core explained by carbon alloying. Nat Geosci 8:220–223. https://doi.org/10.1038/ngeo2370
Robie RA, Hemingway BS, Fisher JR (1978) Thermodynamic properties of minerals and related substances at 298.15K and 1 bar (105pascals) pressure and at higher temperatures. US Geol Surv Bull 1452:12–29
Sakai T, Takahashi S, Nishitani N et al (2014) Equation of state of pure iron and Fe0.9Ni0.1 alloy up to 3 Mbar. Phys Earth Planet Inter 228:114–126. https://doi.org/10.1016/j.pepi.2013.12.010
Sakamaki T, Ohtani E, Fukui H et al (2016) Constraints on Earth’s inner core composition inferred from measurements of the sound velocity of hcp-iron in extreme conditions. Sci Adv 2:e1500802. https://doi.org/10.1126/sciadv.1500802
Shibazaki Y, Ohtani E, Fukui H et al (2012) Sound velocity measurements in dhcp-FeH up to 70 GPa with inelastic X-ray scattering: implications for the composition of the Earth’s core. Earth Planet Sci Lett 313–314:79–85. https://doi.org/10.1016/j.epsl.2011.11.002
Singh SC, Taylor MAJ, Montagner JP (2000) On the presence of liquid in Earth’s inner core. Science 287:2471–2474. https://doi.org/10.1126/science.287.5462.2471
Sossi P (2017) Planetary science: a nickel for your planet’s thoughts. Nat Geosci 10:249–251. https://doi.org/10.1038/ngeo2909
Takahashi T, Bassett W, Mao H (1968) Isothermal compression of the alloys of iron up to 300 kilobars at room temperature: iron–nickel alloys. J Geophys Res 73:4717–4725. https://doi.org/10.1029/JB073i014p04717
Terasaki H, Kamada S, Sakai T et al (2011) Liquidus and solidus temperatures of a Fe–O–S alloy up to the pressures of the outer core: implication for the thermal structure of the Earth’s core. Earth Planet Sci Lett 304:559–564. https://doi.org/10.1016/j.epsl.2011.02.041
Umemoto K, Hirose K (2015) Liquid iron-hydrogen alloys at outer core conditions by first-principles calculations. Geophys Res Lett 42:7513–7520. https://doi.org/10.1002/2015GL065899
Acknowledgements
We thank Dr. Alexander F. Goncharov and Dr. Junichi Nakajima for their technical advice. Phase identification of our samples at high pressures was performed by means of synchrotron X-ray diffraction measurements at BL10XU, SPring-8 (proposal no. 2016B0080).
Author information
Authors and Affiliations
Corresponding authors
Rights and permissions
About this article
Cite this article
Wakamatsu, T., Ohta, K., Yagi, T. et al. Measurements of sound velocity in iron–nickel alloys by femtosecond laser pulses in a diamond anvil cell. Phys Chem Minerals 45, 589–595 (2018). https://doi.org/10.1007/s00269-018-0944-3
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00269-018-0944-3