Skip to main content

Corrosion inhibition by aerobic biofilms on SAE 1018 steel

Abstract

Carbon steel (SAE 1018) samples were exposed to complex liquid media containing either the aerobic bacterium Pseudomonas fragi or the facultative anaerobe Escherichia coli DH5α. Compared to sterile controls, mass loss was consistently 2- to 10-fold lower in the presence of these bacteria which produce a protective biofilm. Increasing the temperature from 23 °C to 30 °C resulted in a 2- to 5-fold decrease in corrosion inhibition with P. fragi whereas the same shift in temperature resulted in a 2-fold increase in corrosion inhibition with E. coli DH5α. Corrosion observed with non-biofilm-forming Streptomyces lividans TK24 was similar to that observed in sterile media. A dead biofilm, generated in situ by adding kanamycin to an established biofilm, did not protect the metal (corrosion rates were comparable to those in the sterile control), and mass loss in cell-free, spent Luria-Bertani (LB) medium was similar to that in sterile medium. Confocal laser scanning microscopy analysis confirmed the presence of a biofilm consisting of live and dead cells embedded in a sparse glycocalyx matrix. Mass-loss measurements were consistent with microscopic observations of the metal surface after 2 weeks of exposure, indicating that uniform corrosion occurred. The biofilm was also able to withstand mild agitation (60 rpm), provided that sufficient time was given for its development.

This is a preview of subscription content, access via your institution.

Author information

Affiliations

Authors

Additional information

Received: 3 May 1996 / Received revision: 8 August 1996 / Accepted: 24 August 1996

Rights and permissions

Reprints and Permissions

About this article

Cite this article

Jayaraman, A., Earthman, J. & Wood, T. Corrosion inhibition by aerobic biofilms on SAE 1018 steel. Appl Microbiol Biotechnol 47, 62–68 (1997). https://doi.org/10.1007/s002530050889

Download citation

Keywords

  • Mass Loss
  • Streptomyces
  • Corrosion Rate
  • Carbon Steel
  • Corrosion Inhibition