Abstract
Performance of two kinds of energy storage methods used in the household refrigeration is investigated and analyzed. A Mixture of De-ionized water with Natural graphite (3 wt%) and Paraffin (OM–46) were considered for phase change material (PCM) in the evaporator side and the condenser side respectively. After thorough investigation through experimental verification it is inferred that this set up has significantly enhanced the condenser heat transfer and the overall performance of the refrigerator. The variation in the compressor exit temperature exhibits a considerable dip in the maximum temperature of the compressor. This helps to increase the life time of the compressor. The evaporator and condenser temperature were approximately the same when the PCM is used on evaporator side. Under test conditions, this design of refrigerator could save energy by 16–22 % with PCM on condenser and 7–13 % with PCM on evaporator.
Similar content being viewed by others
Abbreviations
- DSC:
-
Differential Scanning Calorimeter
- PCMs:
-
Phase Change Materials
- Q:
-
Heat transfer rate [kJ]
- TES:
-
Thermal Energy Storage
- t:
-
time [s]
- c:
-
condenser side of refrigerator
- e:
-
evaporator side of refrigerator
- in:
-
inlet
- l:
-
liquid
- out:
-
Outlet
References
Dandotiya D, Banker ND (2017) Performance enhancement of a refrigerator using phase change material-based condenser: an experimental investigation. International Journal of Air-Conditioning and Refrigeration 25:4–1750032
Cheng W-l, Ding M, Yuana X-d, Han B-C (2017) Analysis of energy saving performance for household refrigerator with thermal storage of condenser and evaporator. Energ Convers Manage 132:180–188
Statistics (2019) On the https://www.statista.com. Accessed August 2020
Energy statistics in India (2019) On the https://www.mospi.gov.in. Accessed August 2020
Khan MIH, Afroz HHM (2015) Effect of PCM on compressor on-off cycling of a household refrigerator. Sci Technol Built Environ 158:462–468
Bista S, Hosseini SE, Owens E, Phillips G (2018) Performance improvement and energy consumption reduction in refrigeration systems using phase change material (PCM). Appl Therm Eng 142:723–735
Elarem R, Mellouli S, Abhilash E, Jemni A (2017) Performance analysis of a household refrigerator integrating a PCM heat exchanger. Appl Therm Eng 125:1320–1333
Cofré-Toledo J, Vasco DA, Isaza-Roldán C, Tangarife J (2018) Evaluation of an integrated household refrigerator evaporator with two eutectic phase-change materials. Int J Ref 93:29–37
Maiorino A, Mota-Babiloni A, Greco A, Aprea C (2019) The thermal performances of a refrigerator incorporating a phase change material. Int J Ref 100:255–264
Pirvaram A, Sadrameli SM, Abdolmaleki L (2019) Energy management of a household refrigerator using eutectic environmental friendly PCMs in a cascaded condition. Energy 181:321–330
Gang Y, Liu Y, Qian S, Yu J (2019) Theoretical study on a vapor compression refrigeration system with cold storage for freezer applications. Appl Therm Eng 160:114091
Berdja M, Hamid A, Saric O (2019) Characteristics and thickness effect of phase change material and frost on heat transfer and thermal performance of conventional refrigerator: Theoretical and experimental investigation. Int J Refrig 97:108–123
Suamir IN, Made Rasta I, Sudirman (2019) Development of corn-oil ester and water mixture phase change materials for food refrigeration applications. Energy Procedia, Elsevier 161:198–206
Lu W, Liu G, Xing X, Wang H (2019) Investigation on ternary salt-water solutions as phase change materials for cold storage. Energy Procedia 158:5020–5025
Raj AF, Sekhar J (2019) Investigation of energy and exergy performance on a small-scale refrigeration system with PCMs inserted between coil and wall of the evaporator cabin. J Therm Anal Calorim 136:355–365
Abdolmaleki L, Sadrameli SM, Pirvaram A (2020) Application of environmental friendly and eutectic phase change materials for the efficiency enhancement of household freezers. Renew Energy 145:233–241
Xie N, Li Z, Gao (2020) Preparation and performance of modified expanded graphite/eutectic salt composite phase change cold storage material. Int J Refrig 110:178–186
Lane GA (1983) Solar heat storage: latent heat material, vol I: Background and Scientific Principles. CRC Press, Florida,
Choi DH, Lee J, Hong H, Kang YT (2014) Thermal conductivity and heat transfer performance enhancement of phase change materials (PCM) containing carbon additives for heat storage application. Int J Refrig 42:112–120
Yusufoglu Y, Apaydin T, Yilmaz S, Paksoy HO (2015) Improving performance of household refrigerators by incorporating phase change materials. Int J Refrig 57:173–185
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Conflict of interest
The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Highlights
• Impact of PCM inclusion in the condenser and evaporator sides was analysed.
• The energy consumption of the proposed refrigerator with PCM is reduced by 15 %.
• Temperature variations were observed and analyzed with different PCMs on condenser and evaporator.
• Prepared PCM is kept in spherical balls and placed in the evaporator inside the refrigerator.
Rights and permissions
About this article
Cite this article
Kasinathan, D., Kumaresan, V. Study on the effect of inclusion of thermal energy storage unit in the energy performance of a household refrigerator. Heat Mass Transfer 57, 1753–1761 (2021). https://doi.org/10.1007/s00231-021-03070-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00231-021-03070-5