# Saturated flow boiling heat transfer: review and assessment of prediction methods

- 303 Downloads

## Abstract

This paper presents a review of the correlations for saturated flow boiling heat transfer coefficients. Fifty correlations are systematically reviewed, which fall into seven categories. An experimental database for saturated flow boiling heat transfer was compiled from 67 sources. It contains 10,932 data points and covers 19 fluids, including eight pure halogenated refrigerants (R134a, R22, R123, R1234yf, R1234ze(E), R152a, R245fa, and R32), five refrigerant mixtures (R404A, R407C, R410A, R417A, and R507), four inorganic compounds (CO_{2}, ammonia, water, and nitrogen), and two hydrocarbons (R290 and R600a). The parameter range of the database covers hydraulic diameters of 0.137–21 mm, mass fluxes of 20–1500 kg m^{−2} s^{−1}, heat fluxes of 1.99–201 kW m^{−2}, qualities of 0.001–0.999, and reduced pressures of 0.005–0.61. Fifty correlations of saturated flow boiling heat transfer coefficients are evaluated with the database, and the detail analysis of the evaluation results is performed. The work provides a guide to choosing a proper correlation for a given application and is helpful for understanding prediction methods of saturated flow boiling heat transfer coefficients.

## Nomenclature

*A*_{c}flow area or cross-sectional area (m

^{2})*Bd*Bond number,

*g*(*ρ*_{l}−*ρ*_{g})*D*^{2}/*σ**Bo*boiling number,

*q*/(*Gh*_{lg})*Bo*_{m}modified boiling number, (

*Gh*_{lg}/*q*)[1 +*x*(*ρ*_{l}/*ρ*_{g}− 1)]*C*Chisholm constant

*Co*confinement number, \( \sqrt{\sigma /\left[g\left({\rho}_l-{\rho}_g\right)\right]}/D \)

*Cv*convection number, [(1 −

*x*)/*x*]^{0.8}(*ρ*_{g}/*ρ*_{l})^{0.5}*c*_{p}specific heat at constant pressure (J kg

^{-1}K^{-1})*D*diameter, hydraulic diameter (m),4

*A*_{c}/*P**D*_{c}Laplace constant,\( \sqrt{\sigma /\left[g\left({\rho}_l-{\rho}_g\right)\right]} \)

*F*Reynolds number factor

*F*_{f}fluid-dependent parameter

*Fa*Fang number, (

*ρ*_{l}−*ρ*_{g})*σ*/(*G*^{2}*D*)*Fr*Froude number

*f*Moody friction factor

*G*mass flux (kg m

^{-2}s^{-1})*g*Earth gravity,

*g*= 9.8 m s^{-2}.*H*height of rectangular channel (m)

*h*heat transfer coefficient (W m

^{-2}K^{-1})*h*_{lg}latent heat of vaporization (J kg

^{-1})*K*_{p}pressure dimensionless parameter, \( p/\sqrt{\sigma g\left({\rho}_l-{\rho}_g\right)} \)

*L*channel length (m)

*M*molecular mass (kg kmol

^{-1})*Nu*Nusselt number

*P*wetted perimeter (m)

*P*_{R}reduced pressure,

*p*/*p*_{crit}*Pe*_{m}modified Peclet number,

*qD*_{c}/(*h*_{lg}*ρ*_{g}*α*_{l})*Pr*Prandtl number,

*c*_{p}*μ*/*λ**p*pressure (Pa)

*q*heat flux from channel wall to fluid (W m

^{-2})*Re*Reynolds number

*S*suppression factor

*T*temperature (K)

*t*temperature (°C)

*W*width of rectangular channel (m)

*We*Weber number

*X*Martinelli parameter

*x*vapor quality

## Greek symbols

*α*thermal diffusivity (m

^{2}s^{-1})*β*_{c}contact angle (rad)

*δ*thickness (m)

*ε*roughness (m), void fraction

*θ*angle (rad), ratio of height to width of channel cross-section

*λ*thermal conductivity (W m

^{-1}K^{-1})*μ*dynamic viscosity (kg s

^{-1}m^{-1})*ρ*density (kg m

^{-3})*σ*surface tension (N m

^{-1})*τ*pair period (s)

*ϕ*^{2}two-phase friction multiplier

## Subscripts

*cb*convective boiling

*crit*critical point

*dry*dryout

*exp*experimental

*f*fluid

*film*liquid film between bubble and wall

*g*saturated vapor

*go*gas only, all flow taken as vapor

*IA*intermittent to annular flow transition

*l*saturated liquid

*lam*laminar flow

*lo*liquid only, all flow taken as liquid

*nb*nucleate boiling

*pred*predicted

*sat*saturated

*sp*single-phase

*tp*two-phase

*tt*turbulent liquid/turbulent gas

*trans*laminar-turbulent transition

*v*viscous

*w*channel inner wall surface

## Notes

### Acknowledgements

This study is supported by National Natural Science Foundation of China (51576099, 51176074).

### Compliance with ethical standards

### Conflict of interest

On behalf of all authors, the corresponding author states that there is no conflict of interest.

## References

- 1.Kim S-M, Mudawar I (2014) Review of databases and predictive methods for heat transfer in condensing and boiling mini/micro-channel flows. Int J Heat Mass Transf 77:627–652Google Scholar
- 2.Fang X, Zhou Z, Li D (2013) Review of correlations of flow boiling heat transfer coefficients for carbon dioxide. Int J Refrig 36:2017–2039Google Scholar
- 3.Chen JC (1966) Correlation for boiling heat transfer to saturated fluids in convective flow. I & EC Process Des Dev 5:322–329Google Scholar
- 4.Gungor KE, Winterton RHS (1986) General correlation for flow boiling in tubes and annuli. Int J Heat Mass Transf 26:351–358zbMATHGoogle Scholar
- 5.Kandlikar SG (1990) A general correlation for two-phase flow boiling heat transfer inside horizontal and vertical tubes. J Heat Transf 112:219–228Google Scholar
- 6.Shah MM (1982) Chart correlation for saturated boiling heat transfer: equation and further study. ASHRAE Trans 88:185–196Google Scholar
- 7.Kandlikar SG, Grande WJ (2003) Evolution of micro-channel flow passages–thermohydraulic performance and fabrication technology. Heat Trans Eng 24(1):3–17Google Scholar
- 8.Ozone Secretariat of United Nations Environment Programme, The Montreal protocol on substances that deplete the ozone layer, <http://ozone.unep.org/pdfs/Montreal-Protocol2000.pdf>, [accessed 12.1.2017]
- 9.Fang X, Wu Q, Yuan Y (2017) A general correlation for saturated flow boiling heat transfer in channels of various sizes and flow directions. Int J Heat Mass Transf 107:972–981Google Scholar
- 10.Fang X (2013) A new correlation of flow boiling heat transfer coefficients based on R134a data. Int J Heat Mass Transf 66:279–283Google Scholar
- 11.Fang X, Zhou Z, Wang H (2015) Heat transfer correlation for saturated flow boiling of water. Appl Therm Eng 76(5):147–156Google Scholar
- 12.Fang X (2013) A new correlation of flow boiling heat transfer coefficients for carbon dioxide. Int J Heat Mass Transf 64:802–807Google Scholar
- 13.Gungor KE, Winterton RHS (1987) Simplified general correlation for saturated flow boiling and comparisons of correlations with data. Chem Eng Res Des 65:148–156Google Scholar
- 14.Liu Z, Winterton RHS (1991) A general correlation for saturated and subcooled flow boiling in tubes and annuli, based on a nucleate pool boiling equation. Int J Heat Mass Transf 34:2759–2766Google Scholar
- 15.Bertsch SS, Groll EA, Garimella SV (2009) A composite heat transfer correlation for saturated flow boiling in small channels. Int J Heat Mass Transf 52:2110–2118Google Scholar
- 16.Sun L, Mishima K (2009) An evaluation of prediction methods for saturated flow boiling heat transfer in mini-channels. Int J Heat Mass Transf 52:5323–5329zbMATHGoogle Scholar
- 17.Zhang W, Hibiki T, Mishima K (2004) Correlation for flow boiling heat transfer in mini-channels. Int J Heat Mass Transf 47:5749–5763Google Scholar
- 18.Li W, Wu Z (2010) A general criterion for evaporative heat transfer in micro/mini-channels. Int J Heat Mass Transf 53:1967–1976Google Scholar
- 19.Kim S-M, Mudawar I (2013) Universal approach to predicting saturated flow boiling heat transfer in mini/micro channels - part II. Two-phase heat transfer coefficient. Int J Heat Mass Transf 64:1239–1256Google Scholar
- 20.Wattelet JP, Chato JC, Souza AL, Christoffersen BR (1994) Evaporative characteristics of R-12, R-134a, and a mixture at low mass fluxes. ASHRAE Trans 100:603–615Google Scholar
- 21.Cooper MG (1984) Heat flow rates in saturated nucleate pool boiling – a wide ranging examination using reduced properties. Adv Heat Tran 16:157–239Google Scholar
- 22.Lazarek GM, Black SH (1982) Evaporative heat transfer, pressure drop and critical heat flux in a small vertical tube with R-113. Int J Heat Mass Transf 25:945–959Google Scholar
- 23.Hamdar M, Zoughaib A, Clodic D (2010) Flow boiling heat transfer and pressure drop of pure HFC-152a in a horizontal mini-channel. Int J Refrig 33:566–577Google Scholar
- 24.Tran T, Wambsganss MW, France DM (1996) Small circular- and rectangular channel boiling with two refrigerants. Int J Multiphase Flow 22:485–498zbMATHGoogle Scholar
- 25.Kenning DBR, Cooper MG (1989) Saturated flow boiling of water in vertical tubes. Int J Heat Mass Transf 32:445–458Google Scholar
- 26.Kew PA, Cornwell K (1997) Correlations for prediction of boiling heat transfer in small-diameter channels. Appl Therm Eng 17A:705–715Google Scholar
- 27.Warrier GR, Dhir VK, Momoda LA (2002) Heat transfer and pressure drop in narrow rectangular channels. Exp Thermal Fluid Sci 26:53–64Google Scholar
- 28.Li W, Wu Z (2010) A general correlation for evaporative heat transfer in micro/mini-channels. Int J Heat Mass Transf 53:1778–1787Google Scholar
- 29.Kaew-On J, Sakamatapan K, Wongwises S (2011) Flow boiling heat transfer of R134a in the multiport minichannel heat exchangers. Exp Thermal Fluid Sci 35:364–374Google Scholar
- 30.Jung DS, McLinden M, Radermacher R, Didion D (1989) A study of flow boiling heat transfer with refrigerant mixtures. Int J Heat Mass Transf 32:1751–1764Google Scholar
- 31.Saitoh S, Daiguji H, Hihara H (2007) Correlation for boiling heat transfer of R-134a in horizontal tubes including effect of tube diameter. Int J Heat Mass Transf 50:5215–5225zbMATHGoogle Scholar
- 32.Choi K-I, Pamitran AS, Oh J-T (2007) Two-phase flow heat transfer of CO
_{2}vaporization in smooth horizontal minichannels. Int J Refrig 30:767–777Google Scholar - 33.Pamitran AS, Choi K-I, Oh J-T (2011) Nasruddin, evaporation heat transfer coefficient in single circular small tubes for flow natural refrigerants of C
_{3}H_{8}, NH_{3}, and CO_{2}. Int J Multiphase Flow 37:794–801Google Scholar - 34.Mahmoud MM, Karayiannis TG (2013) Heat transfer correlation for flow boiling in small to micro tubes. Int J Heat Mass Transf 66:553–574Google Scholar
- 35.S Tanaka, H Daiguji, F Takemuka, E Hihara (2001) Boiling heat transfer of carbon dioxide in horizontal tubes, In: Proceeding of 38th National Heat Transfer Symposium of Japan, Saitama, Japan. 899–900Google Scholar
- 36.J Wang, S Ogasawara, E Hihara (2003) Boiling heat transfer and air coil evaporator of carbon dioxide, In: Proc. 21st IIR Int. Congress RefrigerationGoogle Scholar
- 37.Chien NB, Vu PQ, Choi K-I, Oh J-T (2015) A general correlation to predict the flow boiling heat transfer of R410A in macro−/mini-channels. Sci Technol Built Environ 21:526–534Google Scholar
- 38.Yoon SH, Cho ES, Hwang YW, Kim MS, Min K, Kim Y (2004) Characteristics of evaporative heat transfer and pressure drop of carbon dioxide and correlation development. Int J Refrig 27:111–119Google Scholar
- 39.Thome JR, El Hajal J (2004) Flow boiling heat transfer to carbon dioxide: general prediction method. Int J Refrig 28:294–301Google Scholar
- 40.Cheng L, Ribatski G, Thome JR (2008) New prediction methods for CO
_{2}evaporation inside tubes: part II—an updated general flow boiling heat transfer model based on flow patterns. Int J Heat Mass Transf 51:125–135zbMATHGoogle Scholar - 41.Kandlikar SG, Balasubramanian P (2004) An extension of the flow boiling correlation to transition, laminar, and deep laminar flows in minichannels and microchannels. Heat Trans Eng 25(3):86–93Google Scholar
- 42.Ducoulombier M, Colasson S, Bonjour J, Haberschill P (2011) Carbon dioxide flow boiling in a single microchannel – part II: heat transfer. Exp Thermal Fluid Sci 35:597–611Google Scholar
- 43.Stephan K, Auracher H (1981) Correlations for nucleate boiling heat transfer in forced convection. Int J Heat Mass Transf 24(1):99–107Google Scholar
- 44.Yu W, France DM, Wambsganss MW, Hull JR (2002) Two-phase pressure drop, boiling heat transfer, and critical heat flux to water in a small-diameter horizontal tube. Int J Multiphase Flow 28:927–941zbMATHGoogle Scholar
- 45.A Malek, R Colin (1983) Ebullition de l'ammoniac en tube long. Transfert de chaleur et pertes de charges en tubes vertical et horizontal, 2nd ed., Centre Tecnique des Industries Mecaniques, Senlis, Senlis, FranceGoogle Scholar
- 46.Stephan K (1992) Heat transfer in condensation and boiling. Springer, New YorkGoogle Scholar
- 47.Lee J, Mudawar I (2005) Two-phase flow in high-heat flux micro-channel heat sink for refrigeration cooling applications: part II–heat transfer characteristics. Int J Heat Mass Transf 48:941–955Google Scholar
- 48.Yan YY, Lin TF (1998) Evaporation heat transfer and pressure drop of refrigerant R-134a in a small pipe. Int J Heat Mass Transf 41:4183–4194Google Scholar
- 49.Klimenko VV (1982) Heat transfer intensity at forced flow boiling of cryogenic liquids in tubes. Cryogenics 22(11):569–576Google Scholar
- 50.Klimenko VV (1988) A generalized correlation for two-phase forced flow heat transfer. Int J Heat Mass Transf 31(3):541–552Google Scholar
- 51.Qi SL, Zhang P, Wang RZ, Xu LX (2007) Flow boiling of liquid nitrogen in micro-tubes: part II – heat transfer characteristics and critical heat flux. Int J Heat Mass Transf 50:5017–5030zbMATHGoogle Scholar
- 52.Steiner D, Taborek J (1992) Flow boiling heat transfer in vertical tubes correlated by an asymptotic model. Heat Trans Eng 13:43–69Google Scholar
- 53.Thome JR, Dupont V, Jacobi AM (2004) Heat transfer model for evaporation in microchannels, part I: presentation of the model. Int J Heat Mass Transf 47:3375–3385zbMATHGoogle Scholar
- 54.Wang G, Hao L, Cheng P (2010) A four-zone model for saturated flow boiling in a microchannel of rectangular cross-section. Int J Heat Mass Transf 53:3439–3448Google Scholar
- 55.Xu Y, Fang X, Li G, Li D (2015) An experimental investigation of flow boiling heat transfer and pressure drop of R134a in a horizontal 2.168 mm tube under hypergravity. Part II: heat transfer coefficient. Int J Heat Mass Transf 80:597–604Google Scholar
- 56.Zhou Z, Fang X, Li D (2013) Evaluation of correlations of flow boiling heat transfer of R22 in horizontal channels. Sci World J 458797:1–14Google Scholar
- 57.Wang H, Fang X (2016) Evaluation analysis of correlations of flow boiling heat transfer coefficients applied to ammonia. Heat Trans Eng 37(1):32–44Google Scholar
- 58.Charnay R, Revellin R, Bonjour J (2015) Flow boiling heat transfer in minichannels at high saturation temperatures: part II – assessment of predictive methods and impact of flow regimes. Int J Heat Mass Transf 87:653–672Google Scholar
- 59.Grauso S, Mastrullo R, Mauro AW, Vanoli GP (2013) Flow boiling of R410A and CO
_{2}from low to medium reduced pressures in macro channels: experiments and assessment of prediction methods. Int J Heat Mass Transf 56:107–118Google Scholar - 60.Dittus FW, Boelter LMK (1930) Heat transfer in automobile radiators of the tubular type, University of California Publications in Engineering. Berkeley 2:443–461zbMATHGoogle Scholar
- 61.Gnielinski V (1976) New equations for heat and mass transfer in turbulent pipe and channel flow. Int Chem Eng 16(2):359–368Google Scholar
- 62.EW Lemmon, ML Huber, MO McLinden, REFPROP, NIST Standard Reference Database 23, Version 9.0, 2010Google Scholar
- 63.Chisholm D (1967) A theoretical basis for the Lockhart–Martinelli correlation for two-phase flow. Int J Heat Mass Transf 10:1767–1778Google Scholar
- 64.D Gorenflo (1993) Pool boiling, VDI Heat Atlas, Dusseldorf, Germany, p. Ha1–25Google Scholar
- 65.BS Petukhov, VV Kirillov (1958) On heat exchange at turbulent flow of liquid in pipes, Teploenergetika (4): 63–68Google Scholar
- 66.Xu Y, Fang X, Li G, Li D, Yuan Y (2016) An experimental study of flow boiling heat transfer of R134a and evaluation of existing correlations. Int J Heat Mass Transf 92:1143–1157Google Scholar
- 67.Choi K-I, Chien N-B, Oh J-T (2013) Heat transfer coefficient during evaporation of R-1234yf, R-134a, and R-22 in horizontal circular small tubes. Adv Mech Eng 6:397–406Google Scholar
- 68.Kundu A, Kumar R, Gupta A (2014) Evaporative heat transfer of R134a and R407C inside a smooth tube with different inclinations. Int J Heat Mass Transf 76:523–533Google Scholar
- 69.Kundu A, Kumar R, Gupta A (2014) Heat transfer characteristics and flow pattern during two-phase flow boiling of R134a and R407C in a horizontal smooth tube. Exp Thermal Fluid Sci 57:344–352Google Scholar
- 70.Abadi GB, Yun E, Kim KC (2016) Flow boiling characteristics of R134a and R245fa mixtures in a vertical circular tube. Exp Thermal Fluid Sci 72:112–124Google Scholar
- 71.Jiang GB, Tan JT, Nian QX, Tang SC, Tao WQ (2016) Experimental study of boiling heat transfer in smooth/micro-fin tubes of four refrigerants. Int J Heat Mass Transf 98:631–642Google Scholar
- 72.Kanizawa FT, Tibiriçá CB, Ribatski G (2016) Heat transfer during convective boiling inside microchannels. Int J Heat Mass Transf 93:566–583Google Scholar
- 73.X Tu, PS Hrnjak (2004) Flow and heat transfer in microchannels 30 to 300 microns in hydraulic diameter, ACRC CR-53, University of Illinois at Urbana–ChampaignGoogle Scholar
- 74.J.B. Copetti, M.H. Macagnan, F. Zinani, Experimental study on R-600a boiling in 2.6 mm tube, Int. J. Refrigeration 36 (2013) 325–334Google Scholar
- 75.Wen M-Y, Ho C-Y (2005) Evaporation heat transfer and pressure drop characteristics of R-290 (propane), R-600 (butane), and a mixture of R-290/R-600 in the three-lines serpentine small-tube bank. Appl Therm Eng 25(17):2921–2936Google Scholar
- 76.Jabardo JMS, Filho EPB (2000) Convective boiling of halocarbon refrigerants flowing in a horizontal copper tube – an experimental study. Exp Thermal Fluid Sci 23:93–104Google Scholar
- 77.Balachander P, Raja B (2015) Investigation on the boiling heat transfer characteristics of R404A and R134a under stratified flow condition. Heat Mass Transf 51:825–835Google Scholar
- 78.Oh JT, Pamitran AS, Choi K-I, Hrnjak P (2011) Experimental investigation on two-phase flow boiling heat transfer of five refrigerants in horizontal small tubes of 0.5, 1.5 and 3.0 mm inner diameters. Int J Heat Mass Transf 54:2080–2088Google Scholar
- 79.Consolini L, Thome JR (2009) Micro-channel flow boiling heat transfer of R-134a, R-236fa, and R-245fa. Microfluid Nanofluid 6:731–746Google Scholar
- 80.EA Pike-Wilson, MM Mahmoud, TG Karayiannis (2013) Flow boiling of R134a and R245fa in a 1.1 mm diameter tube, In: Int. Conf. Nanochannels, Microchannels, MinichannelsGoogle Scholar
- 81.CB Tibiriçá, G Ribatski, JR Thome. Flow Boiling Characteristics for R1234ze(E) in 1.0 and 2.2 mm Circular Channels, J. Heat Transfer 134 (2012) 020906-(1–8)Google Scholar
- 82.Grauso S, Mastrullo R, Mauro AW, Thome JR, Vanoli GP (2013) Flow pattern map, heat transfer and pressure drops during evaporation of R-1234ze(E) and R134a in a horizontal, circular smooth tube: experiments and assessment of predictive methods. Int J Refrig 36:478–491Google Scholar
- 83.Zhang L, Hihara E, Saito T (1997) Boiling heat transfer of a ternary refrigerant mixture inside a horizontal smooth tube. Int J Heat Mass Transf 40:2009–2011Google Scholar
- 84.Fayyadh EM, Mahmoud MM, Sefiane K, Karayiannis TG (2017) Flow boiling heat transfer of R134a in multi microchannels. Int J Heat Mass Transf 110:422–436Google Scholar
- 85.Sempértegui-Tapia DF, Ribatski G (2017) The effect of the cross-sectional geometry on saturated flow boiling heat transfer in horizontal micro-scale channels. Exp Thermal Fluid Sci 89:98–109Google Scholar
- 86.Greco A (2008) Convective boiling of pure and mixed refrigerants: an experimental study of the major parameters affecting heat transfer. Int J Heat Mass Transf 51:896–909Google Scholar
- 87.Zhang X, Zhang X, Chen Y, Yuan X (2008) Heat transfer characteristics for evaporation of R417A flowing inside horizontal smooth and internally grooved tubes. Eng Convers Manag 49:1731–1739Google Scholar
- 88.In S, Jeong S (2009) Flow boiling heat transfer characteristics of R123 and R134a in a micro-channel. Int J Multiphase Flow 35:987–1000Google Scholar
- 89.Anwar Z, Palm B, Khodabandeh R (2015) Flow boiling heat transfer, pressure drop and dryout characteristics of R1234yf: experimental results and predictions. Exp Thermal Fluid Sci 66:137–149Google Scholar
- 90.Li M, Dang C, Hihara E (2012) Flow boiling heat transfer of HFO1234yf and R32 refrigerant mixtures in a smooth horizontal tube: part I. Experimental investigation. Int J Heat Mass Transf 55:3437–3446Google Scholar
- 91.Mancin S, Diani A, Rossetto L (2016) Flow boiling heat transfer, dewetting-rewetting, and dryout visualization of HFOs in an asymmetrically heated rectangular plain channel. Appl Therm Eng 107:960–974Google Scholar
- 92.Hossain MA, Onaka Y, Afroz HMM, Miyara A (2013) Heat transfer during evaporation of R1234ze(E), R32, R410A and a mixture of R1234ze(E) and R32 inside a horizontal smooth tube. Int J Refrig 36:465–477Google Scholar
- 93.Qiu J, Zhang H, Yu X, Qi Y, Lou J, Wang X (2015) Experimental investigation of flow boiling heat transfer and pressure drops characteristic of R1234ze(E), R600a, and a mixture of R1234ze(E) /R32 in a horizontal smooth tube. Adv Mech Eng 7:1–12Google Scholar
- 94.Vakili-Farahani F, Agostini B, Thome JR (2013) Experimental study on flow boiling heat transfer of multiport tubes with R245fa and R1234ze(E). Int J Refrig 36:335–352Google Scholar
- 95.Anwar Z, Palm B, Khodabandeh R (2014) Flow boiling heat transfer and dryout characteristics of R152a in a vertical mini-channel. Exp Thermal Fluid Sci 53:207–217Google Scholar
- 96.Abadi GB, Moon C, Kim KC (2016) Effect of gravity vector on flow boiling heat transfer, flow pattern map, and pressure drop of R245fa refrigerant in mini tubes. Int J Multiphase Flow 83:202–216Google Scholar
- 97.Marzoa MG, Ribatski G, Thome JR (2016) Experimental flow boiling heat transfer in a small polyimide channel. Appl Therm Eng 103:1324–1338Google Scholar
- 98.Guo C, Wang J, Du X, Yang L (2016) Experimental flow boiling characteristics of R134a/R245fa mixture inside smooth horizontal tube. Appl Therm Eng 103:901–908Google Scholar
- 99.Abadi GB, Moon C, Kim KC (2016) Flow boiling visualization and heat transfer in metal-foam-filled mini tubes – part I: flow pattern map and experimental data. Int J Heat Mass Transf 98:857–867Google Scholar
- 100.Matsuse Y, Enoki K, Mori H, Kariya K, Hamamoto Y (2016) Boiling heat transfer and pressure drop of a refrigerant R32 flowing in a small horizontal tube. Heat Trans Eng 37:668–678Google Scholar
- 101.Jige D, Sagawa K, Inoue N (2017) Effect of tube diameter on boiling heat transfer and flow characteristic of refrigerant R32 in horizontal small-diameter tubes. Int J Refrig 76:206–218Google Scholar
- 102.Zhu Y, Wu X, Zhao R (2017) R32 flow boiling in horizontal mini channels: part II flow-pattern based prediction methods for heat transfer and pressure drop. Int J Heat Mass Transf 115:1233–1244Google Scholar
- 103.Greco A, Vanoli GP (2005) Flow-boiling of R22, R134a, R507, R404A and R410A inside a smooth horizontal tube. Int J Refrig 28:872–880Google Scholar
- 104.Greco A, Vanoli GP (2005) Flow boiling heat transfer with HFC mixtures in a smooth horizontal tube, part I: experimental investigations. Exp Thermal Fluid Sci 29(2):189–198Google Scholar
- 105.Balachander P, Raja B, Lal DM (2012) Evaporative heat transfer characteristics of R404a and R134a under varied heat flux conditions. Exp Heat Trans 25:254–265Google Scholar
- 106.Balachander P, Raja B, Lal DM (2011) Investigation on boiling heat transfer characteristics of R404A in a 7.49-mm smooth horizontal tube. Exp Heat Trans 24:355–369Google Scholar
- 107.A Greco (2007) A Study on boiling heat transfer characteristics of refrigerant mixtures in a horizontal tube, In: 5th Int. Conf. on Heat Transfer, Fluid Mechanics and Thermodynamics, Sun City, South Africa, GA2Google Scholar
- 108.Kundu A, Kumar R, Gupta A (2014) Flow boiling heat transfer characteristics of R407C inside a smooth tube with different tube inclinations. Int J Refrig 45:1–12Google Scholar
- 109.Aprea C, Greco A, Rosato A (2008) Comparison of R407C and R417A heat transfer coefficients and pressure drops during flow boiling in a horizontal smooth tube. Energy Convers Manag 49:1629–1636Google Scholar
- 110.Niezgoda-Zelasko B, Zelasko J (2015) Refrigerant boiling at low heat flux in vertical tubes with heat transfer enhancing fittings. Int J Refrig 54:151–169Google Scholar
- 111.Wang CC, Chiang CS (1997) Two-phase heat transfer characteristics for R-22, R-407C in a 6.5-mm smooth tube. Heat Fluid Flow 18:550–558Google Scholar
- 112.Lallemand M, Branescu C, Haberschill P (2001) Local heat transfer coefficients during boiling of R22 and R407C in horizontal smooth and microfin tubes. Int J Refrig 24:57–72Google Scholar
- 113.Longo GA, Mancin S, Righetti G, Zilio C (2016) HFC32 and HFC410A flow boiling inside a 4 mm horizontal smooth tube. Int J Refrig 61:12–22Google Scholar
- 114.Wojtan L, Ursenbacher T, Thome JR (2005) Investigation of flow boiling in horizontal tubes: part II— development of a new heat transfer model for stratified-wavy, dryout and mist flow regimes. Int J Heat Mass Transf 48:2970–2985Google Scholar
- 115.Kim Y, Seo K, Chung JT (2002) Evaporation heat transfer characteristics of R-410A in 7 and 9.52 mm smooth/micro-fin tubes. Int J Refrig 25:716–730Google Scholar
- 116.Greco A, Vanoli GP (2004) Evaporation of refrigerants in a smooth horizontal tube: prediction of R22 and R507 heat transfer coefficients and pressure drop. Appl Therm Eng 24:2189–2206Google Scholar
- 117.Yun R, Kim Y, Kim MS (2005) Flow boiling heat transfer of carbon dioxide in horizontal mini tubes. Int J Heat Fluid Flow 26:801–809Google Scholar
- 118.Zhao X, Bansal P (2009) Experimental investigation on flow boiling heat transfer of CO
_{2}at low temperatures. Heat Trans Eng 30:2–11Google Scholar - 119.Jiang L, Liu J, Zhang L, Liu Q, Xu X (2017) Characteristics of heat transfer for CO
_{2}flow boiling at low temperature in mini-channel. Int J Heat Mass Transf 108:2120–2129Google Scholar - 120.Jiang L, Liu J, Zhang L, Xu X (2017) A research on the dryout characteristics of CO
_{2}’s flow boiling heat transfer process in mini-channels. Int J Refrig 83:131–142Google Scholar - 121.Zürcher O, Thome JR, Favrat D (2000) An onset of nucleate boiling criterion for horizontal flow boiling. Int J Ther Sci 39:909–918Google Scholar
- 122.Yin L, Jia L (2016) Confined bubble growth and heat transfer characteristics during flow boiling in microchannel. Int J Heat Mass Transf 98:114–123Google Scholar
- 123.R. Yun, J-S. Hwang, J. T. Chung, Y. Kim, Flow boiling heat transfer characteristics of nitrogen in plain and wire coil inserted tubes, Int J Heat Mass Transf 50 (2007) 2339–2345Google Scholar
- 124.Zhang Q, Chen J, Li J, Cao J, Chen L, Hou Y (2017) Experimental study on saturated flow boiling heat transfer of nitrogen in a small-diameter horizontal heated tube. Exp Thermal Fluid Sci 86:257–271Google Scholar
- 125.Del Col D, Bortolato M, Bortolin S (2014) Comprehensive experimental investigation of two-phase heat transfer and pressure drop with propane in a minichannel. Int J Refrig 47:66–84Google Scholar
- 126.Zou X, Gong MQ, Chen GF, Sun ZH, Zhang Y, Wu JF (2010) Experimental study on saturated flow boiling heat transfer of R170/R290 mixtures in a horizontal tube. Int J Refrig 33:371–380Google Scholar
- 127.Anwar Z, Palm B, Khodabandeh R (2015) Flow boiling heat transfer and dryout characteristics of R600a in a vertical minichannel. Heat Trans Eng 36:1230–1240Google Scholar
- 128.Oliveira JD, Copetti JB, Passos JC (2016) An experimental investigation on flow boiling heat transfer of R-600a in a horizontal small tube. Int J Refrig 72:97–110Google Scholar
- 129.Yang Z, Gong M, Chen G, Zou X, Shen J (2017) Two-phase flow patterns, heat transfer and pressure drop characteristics of R600a during flow boiling inside a horizontal tube. Appl Therm Eng 120:654–671Google Scholar
- 130.Baldassari C, Marengo M (2013) Flow boiling in microchannels and microgravity. Prog Energy Combust Sci 39:1–36Google Scholar
- 131.Tibiriçá CB, Ribatski G (2013) Flow boiling in micro-scale channels – synthesized literature review. Int J Refrig 36(2):301–304Google Scholar
- 132.Mehendal SS, Jacobi AM, Shah RK (2000) Fluid flow and heat transfer at micro- and meso-scales with application to heat exchanger design. Appl Mech Rev 53:175–193Google Scholar
- 133.Cheng P, Wu H-Y, Hong F-J (2007) Phase-change heat transfer in microsystems. J Heat Transf 129:101–107Google Scholar
- 134.Ong CL, Thome JR (2011) Macro-to-microchannel transition in two-phase flow: part 1 – two-phase flow patterns and film thickness measurements. Exp Thermal Fluid Sci 35(1):37–47Google Scholar
- 135.Harichian T, Garimella SV (2011) A comprehensive flow regime map for microchannel flow boiling with quantitative transition criteria. Int J Heat Mass Transf 53:2694–2702Google Scholar