Skip to main content
Log in

Differences in the hygroscopic behavior of bamboo fiber and parenchyma

  • Original
  • Published:
Wood Science and Technology Aims and scope Submit manuscript

Abstract

The interaction between bamboo and moisture leads to mechanical properties and dimensional changes, which is an important issue affecting the processing and utilization of bamboo. Fibers and parenchyma cells are the main components of bamboo, and there are differences in hygroscopicity, but the main factors influencing the differences are unclear. Therefore, this study investigated the relationship between cells, chemical component content, pores and hygroscopic behavior of fibers and parenchyma cells, and analyzed the moisture types and the interaction of functional groups with moisture. The results showed that there was little difference in hygroscopicity between fibers and parenchyma cells at low relative humidity. At humidity greater than 60%, the difference in moisture absorption was significant. The maximum difference in moisture content between fibers and parenchyma cells was 8.81%. At low relative humidity, the abundance of pores did not show advantages, and the humidity had a greater effect on moisture content of parenchyma cells. In addition, moisture absorption at low relative humidity was selective, with moisture favorably bound to lignin. This study, by analyzing the differences in moisture types and absorption sites of fiber and parenchyma cell, could provide a better understanding of the binding mechanism between bamboo and moisture, to provide a theoretical basis for the subsequent research on hygroscopicity of bamboo.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  • Akinbade Y, Nettleship I, Papadopoulos C et al (2021) Modelling full-culm bamboo as a naturally varying functionally graded material. Wood Sci Technol 55:155–179

    Article  CAS  Google Scholar 

  • Berthold J, Olsson R, Salmen L (1998) Water sorption to hydroxyl and carboxylic acid groups in Carboxymethylcellulose (CMC) studied with NIR-spectroscopy. Cellulose (London).5:281–298.

  • Cao MD. (2021) The Pore structure characteristics of bamboo cell wall. Chinese Academy of Forestry Sciences.

  • Célino A, Gonçalves O, Jacquemin F et al (2014) Qualitative and quantitative assessment of water sorption in natural fibres using ATR-FTIR spectroscopy. Carbohydr Polym 101:163–170

    Article  PubMed  Google Scholar 

  • Chen Q, Wang G, Ma X et al (2020) The effect of graded fibrous structure of bamboo (Phyllostachys edulis) on its water vapor sorption isotherms. Ind Crop Prod 151:112467

    Article  CAS  Google Scholar 

  • Chen Q, Fang C, Wang G et al (2021) Water vapor sorption behavior of bamboo pertaining to its hierarchical structure. Sci Rep 11:12714–12714

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  • Feng J, Berger KR, Douglas EP (2004) Water vapor transport in liquid crystalline and non-liquid crystalline epoxies. J Mater Sci 39:3413–3423

    Article  CAS  Google Scholar 

  • Guo X, Qing Y, Wu Y et al (2016) Molecular association of adsorbed water with lignocellulosic materials examined by micro-FTIR spectroscopy. Int J Biol Macromol 83:117–125

    Article  CAS  PubMed  Google Scholar 

  • Guo X, Wu Y, Yan N (2017) Characterizing spatial distribution of the adsorbed water in wood cell wall of ginkgo biloba l. by µ-ftir and confocal raman spectroscopy. Holzforschung 71(5):415–423

    Article  CAS  Google Scholar 

  • Guo X, Liu L, Wu J et al (2018) Qualitatively and quantitatively characterizing water adsorption of a cellulose nanofiber film using micro-FTIR spectroscopy. RSC Adv 8:4214–4220

    Article  CAS  Google Scholar 

  • Guo X, Yuan H, Xiao T et al (2019) Application of micro-FTIR spectroscopy to study molecular association of adsorbed water with lignin. Int J Biol Macromol 131:1038–1043

    Article  CAS  PubMed  Google Scholar 

  • He Q, Zhan T, Zhang H et al (2019) Robust and durable bonding performance of bamboo induced by high voltage electrostatic field treatment. Ind Crop Prod 137:149–156

    Article  CAS  Google Scholar 

  • Huang Y, Lin Q, Yang C et al (2020) Multi-scale characterization of bamboo bonding interfaces with phenol-formaldehyde resin of different molecular weight to study the bonding mechanism. J R Soc Interface 17:20190755–20190755

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  • Jeffrey GA, Saenger W (2021) Hydrogen bonding in Biological structures. Springer Berlin / Heidelberg, Berlin

    Google Scholar 

  • Kadivar M, Gauss C, Mármol G et al (2019) The influence of the initial moisture content on densification process of D. Asper bamboo: physical-chemical and bending characterization. Constr Build Mater 229:116896

    Article  CAS  Google Scholar 

  • Li Z, Luan Y, Hu J et al (2022) Bamboo heat treatments and their effects on bamboo properties. Constr Build Mater 331:127320

    Article  CAS  Google Scholar 

  • Lian C, Liu R, Luo J et al (2020) The morphological characteristics and classification of vascular parenchyma cells in bamboo, Phyllostachys edulis. (Carr) J Houz Holzforschung 74:829–838

    Article  CAS  Google Scholar 

  • Liese W (1980) Anatomy of bamboo. Paper presented at the Bamboo Research in Asia Singapore

  • Liu Y, Zhao G (2012). Wood Science. China Forestry Publishing House. China

  • Meng F, Yu Y, Zhang Y et al (2016) Surface chemical composition analysis of heat-treated bamboo. Appl Surf Sci 371:383–390

    Article  CAS  Google Scholar 

  • Meng X, Sedman J, van de Voort FR (2012) Improving the determination of moisture in edible oils by FTIR spectroscopy using acetonitrile extraction. Food Chem 135:722–729

    Article  CAS  PubMed  Google Scholar 

  • Olsson A, Salmén L (2004) The association of water to cellulose and hemicellulose in paper examined by FTIR spectroscopy. Carbohydr Res 339:813–818

    Article  CAS  PubMed  Google Scholar 

  • Rao J, Bao L, Wang B et al (2018) Plasma surface modification and bonding enhancement for bamboo composites. Compos Part B- Eng 138:157–167

    Article  CAS  Google Scholar 

  • Rasheed M, Jawaid M, Parveez B (2021) Preparation, characterization and Properties of Biodegradable composites from Bamboo fibers-mechanical and morphological study. J Polym Environ 29:4120–4126

    Article  CAS  Google Scholar 

  • Ren W, Guo F, Liu M et al (2021) The arrangement and size of Cellulose Microfibril aggregates in the cell walls of Sclerenchyma fibers and Parenchyma tissue in Bamboo. J Renew Mater 9:2291–2301

    Article  CAS  Google Scholar 

  • Sinko R, Keten S (2014) Effect of moisture on the traction-separation behavior of cellulose nanocrystal interfaces. Appl Phys Lett 105:2488

    Article  Google Scholar 

  • Su M, Zhang R, Li H et al (2019) In situ deposition of MOF199 onto hierarchical structures of bamboo and wood and their antibacterial properties. RSC Adv 9:40277–40285

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  • Tan GX, Cui YD, Yi GB et al (2005) Influence of different states of water in hydrogels on tensile properties. CIESC J 56:2019–2023

    CAS  Google Scholar 

  • Thybring EE, Fredriksson M, SL Zelinka et al (2022) Water in Wood: a review of current understanding and knowledge gaps. Forests 13:2051

    Article  Google Scholar 

  • Wang X, Ren H (2008) Comparative study of the photo-discoloration of moso bamboo (Phyllostachys pubescens Mazel) and two wood species. Appl Surf Sci 254:7029–7034

    Article  CAS  Google Scholar 

  • Wang F, Shao Z (2020) Study on the variation law of bamboo fibers’ tensile properties and the organization structure on the radial direction of bamboo stem. Ind Crop Prod 152:112521

    Article  CAS  Google Scholar 

  • Wang Y, Wang X, Li Y et al (2021) High-performance Bamboo Steel Derived from Natural Bamboo. ACS Appl Mater Interfaces 13:1431–1440

    Article  CAS  PubMed  Google Scholar 

  • Wang Y, Guo F, Li Y et al (2022) High overall performance transparent bamboo composite via a lignin-modification strategy. Compos Part B-Eng 235:109798

    Article  CAS  Google Scholar 

  • Willems W (2018) Hygroscopic wood moisture: single and dimerized water molecules at hydroxyl-pair sites? Wood Sci Technol 52:777–791

    Article  CAS  Google Scholar 

  • Youssefian S, Jakes JE, Rahbar N (2017) Variation of nanostructures, molecular interactions, and Anisotropic Elastic Moduli of lignocellulosic cell walls with moisture. Sci Rep 7:2054–2010

    Article  CAS  PubMed  PubMed Central  Google Scholar 

  • Yuan J, Chen Q, Fang C et al (2021a) Effect of chemical composition of bamboo fibers on water. Cellulose (London) 28:7273–7282

    Article  CAS  Google Scholar 

  • Yuan J, Chen Q, Fei B (2021b) Investigation of the water vapor sorption behavior of bamboo fibers with different sizes. Eur J Wood Prod 79:1131–1139

    Article  Google Scholar 

  • Yuan J, Chen L, Chen Q et al (2022a) Inherent characteristics of the hygroscopicity of fiber and parenchyma of bamboo. Cellulose 29:4951–4959

    Article  CAS  Google Scholar 

  • Yuan J, Chen Q, Fei B (2022b) Different characteristics in the hygroscopicity of the graded hierarchical bamboo structure. Ind Crop Prod 176:114333

    Article  CAS  Google Scholar 

  • Zhang X, Li J, Yu Y et al (2018) Investigating the water vapor sorption behavior of bamboo with two sorption models. J Mater Sci 53:8241–8249

    Article  CAS  Google Scholar 

  • Zheng Y, Yi B, Tong Y et al (2020) Influence of assemble patterns on bonding strength of glued bamboo. J Wood Sci 66:1–8

    Article  Google Scholar 

  • Zhu J, Wang H, Guo F et al (2021) Cell wall polymer distribution in bamboo visualized with in situ imaging FTIR. Carbohydr Polym 274:118653–118653

    Article  CAS  PubMed  Google Scholar 

Download references

Acknowledgements

The authors acknowledge the support provided Northwest A&F University PhD Research Initiation Fund 2452023024.

Author information

Authors and Affiliations

Authors

Contributions

Jing Yuan: Validation, Data Curation, Writing - Original Draft. Yafang Lei: Software, Data Curation, Validation. Bingbing Mi: Data Curation. Meiling Chen: Software, Validation. Qi Chen: Software, Validation. Changhua Fang: Software, Validation. Lin Chen: Conceptualization, Methodology, Writing - Review & Editing. Li Yan: Conceptualization, Methodology, Writing - Review & Editing.

Corresponding authors

Correspondence to Lin Chen or Li Yan.

Ethics declarations

Competing interests

The authors declare that they have no known competing financial interests or personal relationships that could have appeared to influence the work reported in this paper.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Electronic supplementary material

Below is the link to the electronic supplementary material.

Supplementary Material 1

Supplementary Material 2

Rights and permissions

Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Yuan, J., Lei, Y., Mi, B. et al. Differences in the hygroscopic behavior of bamboo fiber and parenchyma. Wood Sci Technol 58, 575–587 (2024). https://doi.org/10.1007/s00226-024-01541-6

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00226-024-01541-6

Navigation