Skip to main content
SpringerLink
Log in

The ambient aging of wood fiber and its effect on mechanical properties of MDF panels

  • Original
  • Published:
Wood Science and Technology Aims and scope Submit manuscript

Abstract

Fourier-transform infrared (FTIR) spectroscopy and scanning electron microscopy (SEM) were used to study ambient-aged wood fibers and their effects on the mechanical properties of medium-density fiberboard (MDF). It was found that MDF made with ambient-aged fibers had poorer mechanical properties than MDF made with fresh fibers; this difference resulted from the alterations of surface characteristics of wood fibers after ambient aging, which led to poor wettability of the urea–formaldehyde (UF) resin applied to the aged wood fibers. After 6 months of ambient aging, the concentration of carbonyl groups in the fibers increased by 144%, while the pH value of wood fiber decreased from 5.2 to 4.7. SEM showed that much more UF resin agglomerated on the surface of ambient-aged fibers and the breakage of MDF made with aged fiber frequently occurred at the resin-fiber interfaces, indicated the poorer wettability of UF resin to fibers due to the decrease in surface energy after aging.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4

Similar content being viewed by others

References

  • Carvalho LMH, Costa MRN, Costa CAV (2003) A global model for the hot-pressing of MDF. Wood Sci Technol 37:241–258

    Article  CAS  Google Scholar 

  • Christiansen AW (1990) How overdrying wood reduces its bonding to phenol-formaldehyde adhesives: a critical review of the literature. Part I. Physical responses. Wood Fiber Sci 22:441–459

    CAS  Google Scholar 

  • Dunky M (1998) Urea-formaldehyde (UF) adhesive resins for wood. Int J Adhes Adhes 18:95–107

    Article  CAS  Google Scholar 

  • Gao ZH, Wang XY, Wang H, Liu Y (2008) Curing characteristics of urea–formaldehyde resin in the presence of various amounts of wood extracts and catalysts. J Appl Polym Sci 107:1555–1562

    Article  CAS  Google Scholar 

  • Garcia RA, Cloutier A, Riedl B (2006) Chemical modification and wetting of medium density fibreboard panels produced from fibres treated with maleated polypropylene wax. Wood Sci Technol 40:402–416

    Article  CAS  Google Scholar 

  • Klason C, Kubat J, Stromvall HE (1984) The efficiency of cellulosic fillers in common thermoplastics. Part 1. Filling without processing aids or coupling agents. Int J Polym Mater 10:159–187

    Article  CAS  Google Scholar 

  • Krump H, Hudec I, Luyt AS (2005) Influence of plasmas on the structural characterization of polyester fibres determined by Hg-porosimetry. Int J Adhes Adhes 25:269–273

    Article  CAS  Google Scholar 

  • Nabil M, Safy ED, Fahmy AM (1994) Effect of accelerated aging on the properties of some writing paper sheets. Polym Intl 34:15–18

    Article  Google Scholar 

  • Nussbaum RM (1999) Natural surface inactivation of Scots pine and Norway spruce evaluated by contact angle measurements. Holz Roh- Werkst 57:419–424

    Article  Google Scholar 

  • Tarabanko VE, Pervishina EP, Hendogina YV (2001) Kinetics of aspen wood oxidation by oxygen in alkaline media. React Kinet Catal Let 72:153–162

    Article  CAS  Google Scholar 

  • Xing C, Deng J, Zhang SY, Riedl B, Cloutier A (2005) Differential scanning calorimetry characterization of urea–formaldehyde resin curing behavior as affected by less desirable wood material and catalyst content. J Appl Polym Sci 98:2027–2032

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. College of Materials Science and Engineering, Northeast Forestry University, 150040, Harbin, China

    Yumei Bai & Zhenhua Gao

Authors
  1. Yumei Bai
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Zhenhua Gao
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Zhenhua Gao.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Bai, Y., Gao, Z. The ambient aging of wood fiber and its effect on mechanical properties of MDF panels. Wood Sci Technol 45, 501–510 (2011). https://doi.org/10.1007/s00226-010-0336-4

Download citation

  • Received:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00226-010-0336-4

Keywords

Search

Navigation