Skip to main content
Log in

Development of analytical procedures for determination of total chromium by quadrupole ICP–MS and high-resolution ICP–MS, and hexavalent chromium by HPLC–ICP–MS, in different materials used in the automotive industry

  • Original Paper
  • Published:
Analytical and Bioanalytical Chemistry Aims and scope Submit manuscript

Abstract

A European directive was recently adopted limiting the use of hazardous substances such as Pb, Hg, Cd, and Cr(VI) in vehicle manufacturing. From July 2003 a maximum of 2 g Cr(VI) will be authorised per vehicle in corrosion-preventing coatings of key components. As no standardised procedures are available to check if produced vehicles are in agreement with this directive, the objective of this work was to develop analytical procedures for total chromium and Cr(VI) determination in these materials. The first step of this study was to optimise digestion procedures for total chromium determination in plastic and metallic materials by inductively coupled plasma mass spectrometry (ICP–MS). High resolution (HR) ICP–MS was used to examine the influence of polyatomic interferences on the detection of the 52Cr+ and 53Cr+ isotopes. If there was strong interference with m/z 52 for plastic materials, it was possible to use quadrupole ICP–MS for m/z 53 if digestions were performed with HNO3+H2O2. This mixture was also necessary for digestion of chromium from metallic materials. Extraction procedures in alkaline medium (NH4 +/NH3 buffer solution at pH 8.9) assisted by sonication were developed for determining Cr(VI) in four different corrosion-preventing coatings by HPLC–ICP–MS. After optimisation and validation with the only solid reference material certified for its Cr(VI) content (BCR 545; welding dusts), the efficiency of this extraction procedure for screw coatings was compared with that described in the EN ISO 3613 standard generally used in routine laboratories. For coatings comprising zinc and aluminium passivated in depth with chromium oxides the extraction procedure developed herein enabled determination of higher Cr(VI) concentrations. This was also observed for the screw covered with a chromium passivant layer on zinc–nickel. For coating comprising a chromium passivant layer on alkaline zinc the standardized extraction procedure was more efficient. In the case of painted metallic plate, because of a reactive matrix towards Cr(VI), its extraction without degradation was difficult to perform.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1.
Fig. 2.
Fig. 3.
Fig. 4.
Fig. 5.

Similar content being viewed by others

References

  1. Ebdon L, Pitts L, Cornelis R, Crews H, Donard OFX, Quevauviller Ph (2001) (eds) Trace element speciation for environment, food and health. RSC, Cambridge

  2. Tittles W, Jakubowski N, Stüwer D, Tölg G (1994) J Anal At Spectrom 9:1015–1020

    Google Scholar 

  3. Andrle CM, Jakubowski N, Broekaert JAC (1997) Spectrochim Acta B 52:189–200

    Article  Google Scholar 

  4. Lam JWH, Mclaren JW, Methven BAJ (1995) J Anal At Spectrom 10:551–554

    CAS  Google Scholar 

  5. Vanhaecke F, Saverwyns S, De Wannemacker G, Moens L, Dams R (2000) Anal Chim Acta 419:55–64

    Article  CAS  Google Scholar 

  6. Wang C-F, Chin C-J, Luo S-K, Men LC (1999) Anal Chim Acta 389:257–266

    Article  CAS  Google Scholar 

  7. Marqués MJ, Salvador A, Morales-Rubio AE, de la Guardia M (1998) Fresenius J Anal Chem 362:239–248

    Article  CAS  Google Scholar 

  8. Marqués MJ, Salvador A, Morales-Rubio AE, de la Guardia M (2000) Fresenius J Anal Chem 367:601–613

    Article  CAS  PubMed  Google Scholar 

  9. Kotas J, Stasicka Z (2000) Environ Pollut 107:263–283

    CAS  Google Scholar 

  10. Séby F, Charles S, Gagean M, Garraud H, Donard OFX (2003) J Anal At Spectrom, submitted for publication

  11. EN ISO 3613 (1995)

  12. Xia L, Akiyama E, Frankel G, McCreery R (2000) J Electrochem Soc 147:2556–2562

    Article  CAS  Google Scholar 

  13. Kendig M, Jeanjaquet S, Addison R, Waldrop J (2001) Surf Coat Technol 140:58–66

    Article  CAS  Google Scholar 

  14. Naranjit D, Thomassen Y, Van Loon JC (1979) Anal Chim Acta 110:307–312

    Article  CAS  Google Scholar 

  15. Blomquist G, Nilsson C-A, Nygren O (1983) Scand J Work Environ Health 9:489–495

    CAS  PubMed  Google Scholar 

  16. Jambunathan S, Dasgupta PK (2000) J Soc Leather Technol Chem 84:63–73

    CAS  Google Scholar 

  17. Milacic R, Scancar J, Urbanc M (1999) J Soc Leather Technol Chem 82:91–93

    Google Scholar 

  18. Boiano JM, Wallace ME, Sieber KS, Groff JH, Wang J, Ashley K (2000) J Environ Monit 2:329–333

    Article  CAS  PubMed  Google Scholar 

  19. Ndung'u K, Djane N-K, Malcus F, Mathiasson L (1999) Analyst 124:1367–1372

    Article  CAS  Google Scholar 

  20. Karwas CP (1995) J Environ Sci Health A 30:1223–1225

    Google Scholar 

  21. Wang J, Ashley K, Kennedy ER, Neumeister C (1997) Analyst 122:1307–1312

    CAS  PubMed  Google Scholar 

  22. Wang J, Ashley K, Marlow D, England EC, Carlton G (1999) Anal Chem 71:1027–1032

    CAS  PubMed  Google Scholar 

  23. Zatka VJ (1985) Am Ind Hyg Assoc J 46:327–331

    Article  CAS  PubMed  Google Scholar 

  24. Huo D, Lu Y, Kingston HM (1998) Environ Sci Technol 32:3418–3423

    Article  CAS  Google Scholar 

  25. Vitale RJ, Mussoline GR, Petura JC, James BR (1994) J Environ Qual 23:1249–1256

    CAS  Google Scholar 

  26. James BR, Petura JC, Vitale RJ, Mussoline GR (1995) Environ Sci Technol 29:2377–2381

    CAS  Google Scholar 

  27. Szulczewski MD, Helmke PA, Bleam WF (1997) Environ Sci Technol 31:2954–2959

    Article  CAS  Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to F. Séby.

Rights and permissions

Reprints and permissions

About this article

Cite this article

Séby, F., Gagean, M., Garraud, H. et al. Development of analytical procedures for determination of total chromium by quadrupole ICP–MS and high-resolution ICP–MS, and hexavalent chromium by HPLC–ICP–MS, in different materials used in the automotive industry. Anal Bioanal Chem 377, 685–694 (2003). https://doi.org/10.1007/s00216-003-2133-5

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00216-003-2133-5

Keywords

Navigation