Abstract
To improve the total efficiency of a dual-bridge series resonance converter, a pulse width modulation plus phase-shifted modulation with voltage balance condition is proposed for a hybrid dual-bridge series resonance converter. The control scheme is unified for the whole operating condition and with simple calculation. By employing the proposed voltage balance control, the equivalent unity voltage gain operation can always be achieved, while a simplified two degrees of freedom control can be easily formed. Wide soft-switching range and reduced tank current can be ensured by the pulse width modulation in active hybrid bridge, and power level is adjusted by the phase-shifted modulation. In addition, a magnetizing current compensation method is also employed to improve the soft-switching performance of low voltage side four MOSFETs. The effectiveness of the proposed control is verified by the experimental results.
Similar content being viewed by others
References
Blaabjerg F, Chen Z, Kjaer S (2004) Power electronics as efficient interface in dispersed power generation systems. IEEE Trans Power Electron 9(5):1184–1194
Chen Z, Guerrero J-M, Blaabjerg F (2009) A review of the state of the art of power electronics for wind turbines’. IEEE Trans Power Electron 24(8):1859–1875
Li X, Bhat A-K (2010) Analysis and design of high-frequency isolated dual-bridge series resonant DC/DC converter. IEEE Trans Power Electron 25(4):850–862
Rodriguez A, Vazquez A, Lamar D-G, Hernando M-M, Sebastian J (2015) Different purpose design strate-gies and techniques to improve the performance of a dual active bridge with phase-shift control. IEEE Trans Power Electron 30(2):790–804
Wen H, Xiao W, Su B (2014) Nonactive power loss minimization in a bidirectional isolated DC-DC converter for distributed power systems. IEEE Trans Ind Electron 61(12):6822–6831
Zhao B, Yu Q, Sun W (2012) Extended-phase-shift control of isolated bidirectional DC-DC converter for power distribution in microgrid. IEEE Trans Power Electron 27(11):4667–4680
Choi H, Jung J (2020) Hybrid modulation strategy of three-phase dual-active-bridge converter to improve power conversion efficiency under light load conditions in LVDC applications. J Power Electron 20(4):894–903
Li X (2014) A LLC-type dual-bridge resonant converter: analysis, design, simulation, and experimental results. IEEE Trans Power Electron 29(8):4313–4321
Zhao B, Song Q, Liu W, Sun Y (2014) Overview of dual-active-bridge isolated bidirectional DC-DC converter for high-frequency-link power-conversion system. IEEE Trans Power Electron 29(8):4091–4106
Shao S, Chen H, Wu X, Zhang J, Sheng K (2019) Circulating current and ZVS-on of a dual active bridge DC-DC converter: a review. IEEE Access 7:50561–50572
Chen G, Li X, Zhou S (2020) Unified boundary control with phase shift compensation for dual bridge series resonant DC-DC converter. IEEE Access 8:131137–131149
Choi W, Rho K-M, Cho B-H (2015) Fundamental duty modulation of dual-active-bridge converter for wide-range operation. IEEE Trans Power Electron 31(6):4048–4064
Xu G, Sha D, Zhang J, Liao X (2016) Unified boundary trapezoidal modulation control utilizing fixed duty cycle compensation and magnetizing current design for dual active bridge DC-DC converter. IEEE Trans Power Electron 32(3):2243–2252
Shi H, Wen H, Hu Y, Jiang L (2018) Reactive power minimization in bidirectional DC-DC converters using a unified-phasor-based particle swarm optimization. IEEE Trans Power Electron 33(12):10990–11006
Corradini L, Seltzer D, Bloomquist D, Zane R, Maksimovic D, Jacobson B (2012) Minimum current operation of bidirectional dual-bridge series resonant DC/DC converters. IEEE Trans Power Electron 27(7):3266–3276
Hu S, Li X, Bhat A-K (2019) Operation of a bidirec-tional series-resonant converter with minimized tank current and wide ZVS range. IEEE Trans Power Electron 34(1):904–915
Yaqoob M, Loo K, Lai Y-M (2019) A four-degrees-of-freedom modulation strategy for dual-active-bridge series-resonant converter designed for total loss minimization. IEEE Trans Power Electron 34(2):1065–1081
Chen G, Gong Y, Li X, Hu S (2021) Voltage balanced control for a hybrid dual bridge series resonant converter. In: Proc. IEEE ISIE. pp 1–6 (2021)
Acknowledgements
This work was supported in part by FDCT under Grant no. 0065/2019/A2, in part by National Natural Science Foundation of China under Grant No. 62003057, in part by Natural Science Foundation of Jiangsu Province under Grant No. BK20191029, and in part by The Natural Science Foundation of Jiangsu Higher Education Institutions of China under Grant No. 19KJB470001.
Funding
The funding was provided by Science and Technology Development Fund of Macau (Grant No: 0065/2019/A2).
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher's Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Chen, G., Li, X., Gong, Y. et al. Voltage balance control for a hybrid dual-bridge series resonance converter with wide soft-switching region and reduced tank current. Electr Eng 106, 1487–1497 (2024). https://doi.org/10.1007/s00202-023-01839-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00202-023-01839-x