Skip to main content

Advertisement

Log in

A real-time LabVIEW-based emulator for various types of electrical loads

  • Original Paper
  • Published:
Electrical Engineering Aims and scope Submit manuscript

Abstract

To test electric devices such as household appliances, electric vehicle and other loads, there is need for emulators instead of real devices, which decreases the cost of testing. This paper presents a dynamically programmable load emulator that imitates the current–time characteristic of different types of the loads. The exact mathematical model of various types of electric loads is firstly extracted. These mathematical models are implemented by LabVIEW software. A non-ideal buck converter is used for the hardware part of the emulator, which is controlled by LabVIEW. The proposed emulator can mimic the types of loads given by LabVIEW software with great accuracy and is an example of an actual load simulator with good approximation. Manufacturers or laboratories of electric equipment can use the proposed emulator to perform their tests instead of using the actual device. This reduces the cost of tests and speeds them up so that all types of electric loads can be modeled with an emulator. In addition, because a simple power electronic converter structure is used, the proposed emulator has low complexity and low manufacturing cost. Simulation and laboratory results prove the efficiency of this emulator in making models of different types of loads.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20
Fig. 21
Fig. 22
Fig. 23
Fig. 24
Fig. 25
Fig. 26
Fig. 27

Similar content being viewed by others

References

  1. Mahesh M, Kumar KV, Abebe M, Udayakumar L, Mathankumar M (2021) A review on enabling technologies for high power density power electronic applications. Mater Today Proc 46:3888–3892

    Article  Google Scholar 

  2. Anastasiadis AG, Kondylis GP, Polyzakis A, Vokas G (2019) Effects of increased electric vehicles into a distribution network. Energy Procedia 157:586–593

    Article  Google Scholar 

  3. Salomonsson D (2008) Modeling, control and protection of low-voltage DC microgrids. KTH

  4. Sockeel N, Gafford J, Papari B, Mazzola M (2020) Virtual inertia emulator-based model predictive control for grid frequency regulation considering high penetration of inverter-based energy storage system. IEEE Trans Sustain Energy 11(4):2932–2939

    Article  Google Scholar 

  5. Nascimento Filho PS, Carvalho JP, dos Santos Neto PJ, De Paula MV, dos Santos Barros TA, Filhoa ER (2021) Modeling and experimental evaluation of energy storage emulator for microgrids application. IEEE J Emerg Sel Top Power Electron. https://doi.org/10.1109/JESTPE.2021.3055079

    Article  Google Scholar 

  6. Kesler M, Ozdemir E, Kisacikoglu MC, Tolbert LM (2014) Power converter-based three-phase nonlinear load emulator for a hardware testbed system. IEEE Trans Power Electron 29(11):5806–5812

    Article  Google Scholar 

  7. Elsayed A, Ebrahim AF, Mohammed H, Mohammed OA (2015) Design and implementation of AC/DC active power load emulator. SoutheastCon 2015:1–5

    Google Scholar 

  8. Rao YS, Chandorkar MC (2009) Real-time electrical load emulator using optimal feedback control technique. IEEE Trans Ind Electron 57(4):1217–1225

    Google Scholar 

  9. Rao YS Chandorkar M (2012) Electrical load emulator for unbalanced loads and with power regeneration. In: 2012 IEEE International Symposium on Industrial Electronics, pp. 320–327

  10. T. Cabeza, J. F. Sanz, M. Calavia, R. Acerete, and S. Cascante, “Fast charging emulation system for electric vehicles,” in 2013 World Electric Vehicle Symposium and Exhibition (EVS27), 2013, pp. 1–6

  11. Mesbahi T, Rizoug N, Bartholomeus P, Le Moigne P (2013) Li-ion battery emulator for electric vehicle applications. In: 2013 IEEE vehicle power and propulsion conference (VPPC), pp. 1–8

  12. Attanasio L, Conti M, Donadel D, Turrin F (2021) MiniV2G: An electric vehicle charging emulator,” arXiv Prepr. arXiv2101.11720

  13. Qi Y, Ma K, Tang W (2021) Full-bandwidth mission profile emulation of the electric machine system with voltage reference signal transmission. IEEE Trans Power Electron 37(3):3473–3483

    Article  Google Scholar 

  14. Ma K, Xia S, Qi Y, Cai X, Song Y, Blaabjerg F (2022) Power-electronics-based mission profile emulation and test for electric machine drive system concepts, features, and challenges. IEEE Trans Power Electron. https://doi.org/10.1109/TPEL.2022.3149996

    Article  Google Scholar 

  15. Geng Z, Gu D, Hong T, Czarkowski D (2018) Programmable electronic AC load based on a hybrid multilevel voltage source inverter. IEEE Trans Ind Appl 54(5):5512–5522

    Article  Google Scholar 

  16. Vijay AS, Doolla S, Chandorkar MC (2020) A single back-to-back converter based system emulator for testing unbalanced microgrids. IEEE Trans Energy Convers. https://doi.org/10.1109/TEC.2020.3006385

    Article  Google Scholar 

  17. Amitkumar KS, Kaarthik RS, Pillay P (2018) A versatile power-hardware-in-the-loop-based emulator for rapid testing of transportation electric drives. IEEE Trans Transp Electrif 4(4):901–911

    Article  Google Scholar 

  18. Ashourianjozdani M, Lopes LAC, Pillay P (2018) Power electronic converter based PMSG emulator: a testbed for renewable energy experiments. IEEE Trans Ind Appl 54(4):3626–3636

    Article  Google Scholar 

  19. Caldognetto T, Dalla Santa L, Magnone P, Mattavelli P (2017) Power electronics based active load for unintentional islanding testbenches. IEEE Trans Ind Appl 53(4):3831–3839

    Article  Google Scholar 

  20. Levron Y, Shmilovitz D (2013) Maximum power point tracking employing sliding mode control. IEEE Trans Circuits Syst I Regul Pap 60(3):724–732

    Article  MathSciNet  MATH  Google Scholar 

  21. Ayop R, Tan CW (2018) Rapid prototyping of photovoltaic emulator using buck converter based on fast convergence resistance feedback method. IEEE Trans Power Electron 34(9):8715–8723

    Article  Google Scholar 

  22. Salomonsson D, Sannino A (2007) Load modelling for steady-state and transient analysis of low-voltage DC systems. IET Electr Power Appl 1(5):690–696

    Article  Google Scholar 

Download references

Funding

Iran National Science Foundation, Grantnumber 97010036.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Abolfazl Vahedi.

Additional information

Publisher's Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Springer Nature or its licensor holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Shadnam Zarbil, M., Khalifeh, M. & Vahedi, A. A real-time LabVIEW-based emulator for various types of electrical loads. Electr Eng 104, 4367–4378 (2022). https://doi.org/10.1007/s00202-022-01629-x

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00202-022-01629-x

Keywords

Navigation