Abstract
This paper presents a real-time control platform developed for rapid prototyping of an induction motor (IM) vector control. Firstly, the control system is designed with the Simulink in the form of user-friendly block-diagrams. Next, c-codes are automatically generated from the block-diagrams with the real-time workshop. And lastly, an executable code, produced from the c-codes through a DSP c-compiler, is downloaded into a target DSP board. With this automatic programming scheme rapid prototyping is realized with the least low-level handwork programming. Presented control platform has been evaluated through the rapid prototyping of a voltage source inverter-fed IM driver and some experiments have been carried out to show its effectiveness.
Similar content being viewed by others
References
Altun H, Sunter S (2003) Matrix converter induction motor drive: modeling, simulation and control. Electrical Eng 86:25–33
Abourida S, Dufour C, Bélanger J, Lapointe V (2003) Real-time, PC-based simulator of electric systems and drives. International Conference on Power Systems Transients – IPST 2003 in New Orleans, USA, pp 1–6
Er MJ, Low CB, Nah KH, Lim MH, Ng SY (2002) Real-time implementation of a dynamic fuzzy neural networks controller for a SCARA. Microprocess Microsyst 26:449–461
Hong KH, Gan WS, Chong YK, Cheong TF, Tan TF (2002) Rapid prototyping of DSP algorithms on VLIW TMS320C6701 DSP. Microprocess Microsyst 26:311–324
Kang MH (1999) An IM driving power electronic system simulation using DNT and Simulink. J Control Automat Syst Eng 5(1):25–32
Vas P (1990) Vector control of AC machines. Clarendon Press, Oxford, pp 122–159
Math Works (1998) Simulink dynamic system simulation for MATLAB using Simulink
Math Works (1998) Real-time workshop for use with Simulink user's guide
Texas Instruments (1998) TMS320C3X/4X optimizing c compiler user's guide
Habetler (1991) A space-vector based regulator for AC/DC/AC converters. Proc. EPE Firenze 2:101–107
Kim N-J, Kang M-H, Yoo J-Y, Park G-T (1995) A full digitalized vector control of induction motor based on novel space vector modulation method. J KIEE 44(11):1447–1456
Math Works (1998) Simulink dynamic system simulation for MATLAB writing S-functions
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Kang, M., Park, Y. A real-time control platform for rapid prototyping of induction motor vector control. Electr Eng 88, 473–483 (2006). https://doi.org/10.1007/s00202-005-0307-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00202-005-0307-1