Skip to main content
SpringerLink
Log in

Experimental study on incident wave speed and the mechanisms of deflagration-to-detonation transition in a bent geometry

  • Original Article
  • Published:
Shock Waves Aims and scope Submit manuscript

Abstract

The study of deflagration-to-detonation transition (DDT) in bent tubes is important with many potential applications including fuel pipeline and mine tunnel designs for explosion prevention and detonation engines for propulsion. The aim of this study is to exploit low-speed incident shock waves for DDT using an S-shaped geometry and investigate its effectiveness as a DDT enhancement device. Experiments were conducted in a valveless detonation chamber using ethylene–air mixture at room temperature and pressure (303 K, 1 bar). High-speed Schlieren photography was employed to keep track of the wave dynamic evolution. Results showed that waves with velocity as low as 500 m/s can experience a successful DDT process through this S-shaped geometry. To better understand the mechanism, clear images of local explosion processes were captured in either the first curved section or the second curved section depending on the inlet wave velocity, thus proving that this S-shaped tube can act as a two-stage device for DDT. Owing to the curved wall structure, the passing wave was observed to undergo a continuous compression phase which could ignite the local unburnt mixture and finally lead to a local explosion and a detonation transition. Additionally, the phenomenon of shock–vortex interaction near the wave diffraction region was also found to play an important role in the whole process. It was recorded that this interaction could not only result in local head-on reflection of the reflected wave on the wall that could ignite the local mixture, and it could also contribute to the recoupling of the shock–flame complex when a detonation wave is successfully formed in the first curved section.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17

Similar content being viewed by others

References

  1. Frolov, S.M., Aksenov, V.S., Basevich, V.Ya.: Initiation of detonation in sprays of liquid fuel. Adv. Chem. Phys. 24(7), 71–79 (2005)

  2. Frolov, S.M., Aksenov, V.S., Shamshin, I.O.: Shock wave and detonation propagation through U-bend tubes. Proc. Combust. Inst. 31(2), 2421–2428 (2007)

    Article  Google Scholar 

  3. Kailasanath, K.: Review of propulsion applications of detonation waves. AIAA. J. 39(9), 1698–1708 (2000)

    Article  Google Scholar 

  4. Oran, E.S., Gamezo, V.N.: Origins of the deflagration-to-detonation transition in gas-phase combustion. Combust. Flame 148(1–2), 4–47 (2007)

    Article  Google Scholar 

  5. Roy, G.D., Frolov, S.M., Borisov, A.A., Netzer, D.W.: Pulse detonation propulsion: challenges, current status, and future perspective. Prog. Energy Combust. Sci. 30(6), 545–672 (2004)

    Article  Google Scholar 

  6. Bykovskii, F.A., Zhdan, S.A., Vedernikov, E.F.: Continuous spin detonation in annular combustors. Combust. Explos. Shock Waves. 41(4), 449–459 (2005)

    Article  Google Scholar 

  7. Bykovskii, F.A., Zhdan, S.A., Vedernikov, E.F.: Continuous spin detonations. J. Propul. Power 22(6), 1204–1216 (2006)

    Article  Google Scholar 

  8. Bykovskii, F.A., Zhdan, S.A.: Current status of research of continuous detonation in fuel-air mixtures. Combust. Explos. Shock Waves. 51(1), 21–35 (2015)

    Article  Google Scholar 

  9. Kindracki, J., Wolanski, P., Gut, Z.: Experimental research on the rotating detonation in gaseous fuels-oxygen mixtures. Shock Waves 21(2), 75–84 (2011)

    Article  Google Scholar 

  10. Kudo, Y., Nagura, Y., Kasahara, J., Sasamoto, Y., Matsuo, A.: Oblique detonation waves stabilized in rectangular-cross-section bent tubes. Proc. Combust. Inst. 33(2), 2319–2326 (2011)

    Article  Google Scholar 

  11. Nakayama, H., Moriya, T., Kasahara, J., Matsuo, A., Sasamoto, Y., Funaki, I.: Stable detonation wave propagation in rectangular-cross-section curved channels. Combust. Flame 159(2), 859–869 (2012)

    Article  Google Scholar 

  12. Ciccarelli, G., de Witt, B.: Detonation initiation by shock reflection from an orifice plate. Shock Waves 15(3–4), 259–265 (2006)

    Article  Google Scholar 

  13. Frolov, S.M.: Detonation initiation and DDT: experiments and numerical simulations. In: Proceedings of the 5th International Seminar on Fire and Explosion Hazards, Edinburgh (2007)

  14. Lee, J.H.S.: The Detonation Phenomenon. Cambridge University Press, Cambridge (2008)

    Book  Google Scholar 

  15. Li, J., Teo, C.J., Lim, K.S., Wen, C., Khoo, B.C.: Deflagration to detonation transition by hybrid obstacles in pulse detonation engines. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference. San Jose, AIAA Paper 2013–3657 (2013)

  16. Lu, F.K., Meyers, J.M., Wilson, D.R.: Experimental study of a pulse detonation rocket with Shchelkin spiral. In: Proceedings of the 24th International Symposium on Shock Waves, Beijing (2005)

  17. Shchelkin, K.I., Troshin, Y.K.: Gasdynamics of Combustion. Akad. Nauk SSSR, Moscow (1963)

  18. Ciccarelli, G., Dorofeev, S.: Flame acceleration and transition to detonation in ducts. Prog. Energy Combust. Sci. 34(4), 499–550 (2008)

    Article  Google Scholar 

  19. Gamezo, V.N., Ogawa, T., Oran, E.S.: Numerical simulations of flame propagation and DDT in obstructed channels filled with hydrogen-air mixture. Proc. Combust. Inst. 31(2), 2463–2471 (2007)

    Article  Google Scholar 

  20. Lee, J.H.S.: Initiation of gaseous detonation. Ann. Rev. Phys. Chem. 28, 75–104 (1977)

  21. Silvestrini, M., Genova, B., Parisi, G., Leon Trujillo, F.J.: Flame acceleration and DDT run-up distance for smooth and obstacles filled tubes. J. Loss Prev. Process Ind. 21(5), 555–562 (2008)

    Article  Google Scholar 

  22. Frolov, S.M., Aksenov, V.S., Shamshin, I.O.: Reactive shock and detonation propagation in U-bend tubes. J. Loss Prev. Process Ind. 20(4–6), 501–508 (2007)

    Article  Google Scholar 

  23. Frolov, S.M., Aksenov, V.S., Shamshin, I.O.: Propagation of shock and detonation waves in channels with U-shaped bends of limiting curvature. Russ. J. Phys. Chem. B 2(5), 759–774 (2008)

    Article  Google Scholar 

  24. Gwak, M., Yoh, J.J.: Effect of multi-bend geometry on deflagration to detonation transition of a hydrocarbon-air mixture in tubes. Int. J. Hydrogen Energy 38(26), 11446–11457 (2013)

    Article  Google Scholar 

  25. Gaathaug, A.V., Vaagsaether, K., Bjerketvedt, D.: Experimental and numerical investigation of DDT in hydrogen-air behind a single obstacle. Int. J. Hydrogen Energy 37(22), 17606–17615 (2012)

    Article  Google Scholar 

  26. Zel’dovich, Y.B., Librovich, V.B., Makhviladze, G.M., Sivashinsky, G.I.: On the development of detonation in a nonuniformly pre-heated gas. Astronaut. Acta 15, 313–321 (1970)

    Google Scholar 

  27. Skews, B.W.: Shock diffraction on rounded corners. In: Proceedings of the Third Australasian Conference on Hydraulics and Fluid Mechanics, Sydney (1968)

  28. Bhattacharjee, R.R.: Experimental Investigation of Detonation Re-initiation Mechanisms Following a Mach Reflection of a Quenched Detonation. Masters Thesis. University of Ottawa, Ottawa (2013)

  29. Boeck, L.R., Kellenberger, M., Rainsford, G., Ciccarelli, G.: Simultaneous OH-PLIF and schlieren imaging of flame acceleration in an obstacle-laden channel. Proc. Combust. Inst. 36(2), 2807–2814 (2017)

    Article  Google Scholar 

  30. Ishii, K., Monwar, M.: Detonation propagation with velocity deficits in narrow channels. Proc. Combust. Inst. 33(2), 2359–2366 (2011)

    Article  Google Scholar 

  31. Polley, N.L., Egbert, M.Q., Petersen, E.L.: Methods of re-initiation and critical conditions for a planar detonation transforming to a cylindrical detonation within a confined volume. Combust. Flame 160(1), 212–221 (2013)

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Department of Mechanical Engineering, National University of Singapore, 5A Engineering Drive 1, 02-02, Singapore, Singapore

    L. Li, C. J. Teo & B. C. Khoo

  2. Temasek Laboratories, National University of Singapore, 5A Engineering Drive 1, 09-02, Singapore, Singapore

    J. Li, P. H. Chang & B. C. Khoo

Authors
  1. L. Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. J. Li
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. C. J. Teo
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. P. H. Chang
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. B. C. Khoo
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to L. Li.

Additional information

Communicated by G. Ciccarelli.

This work has been supported by the fund from the National University of Singapore.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Li, L., Li, J., Teo, C.J. et al. Experimental study on incident wave speed and the mechanisms of deflagration-to-detonation transition in a bent geometry. Shock Waves 28, 205–216 (2018). https://doi.org/10.1007/s00193-017-0721-0

Download citation

  • Received:

  • Revised:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00193-017-0721-0

Keywords

Search

Navigation