Abstract
Traditional geometry optimization of elevator fairings is only based on computational fluid dynamics simulations to find optimal structure parameters, and a large volume of data generated during the elevator operation is not utilized to optimize elevator fairings collaboratively. This paper proposes a digital twin-driven design framework to design the elevator fairing of the next generation. A digital twin model corresponding to the real elevator is first established via a computing platform, and a multi-objective optimization method like neighborhood cultivation genetic algorithms is employed to optimize the elevator fairing design. The effectiveness of the digital twin-driven design framework is demonstrated by the elevator fairing design, and the results show that compared with the unoptimized elevator fairing, the air drag and the lateral force are lowered by 18.1% and 11.2%, respectively, and the turbulence coefficient decreases from 0.478 to 0.451 after optimizing the elevator fairing.
Similar content being viewed by others
References
Qiao S, Zhang R, He Q, Zhang L (2019) Theoretical modeling and sensitivity analysis of the car-induced unsteady airflow in super high-speed elevator. J Wind Eng Ind Aerodyn 188:280–293. https://doi.org/10.1016/j.jweia.2019.02.012
Shi L, Liu Y, Jin S, Cao Z (2007) Numerical simulation of unsteady turbulent flow induced by two-dimensional elevator car and counter weight system. J Hydrodyn 19(6):720–725. https://doi.org/10.1016/S1001-6058(08)60009-8
Chen Y, Yang L, Fu Z, Chen L, Chen J (2018) Gas flow behavior and flow transition in elevator shafts considering elevator motion during a building fire. Build Simul 11(4):765–771. https://doi.org/10.1007/s12273-018-0430-3
Zhou L, Tse TK, Hu G, Li Y (2021) Higher order dynamic mode decomposition of wind pressures on square buildings. J Wind Eng Ind Aerodyn 211:104545. https://doi.org/10.1016/j.jweia.2021.104545
Li CY, Tse TK, Hu G (2020) Dynamic mode decomposition on pressure flow field analysis: Flow field reconstruction, accuracy, and practical significance. J Wind Eng Ind Aerodyn 205:104278. https://doi.org/10.1016/j.jweia.2020.104278
Xie J, Mao S, Zhang Z, Liu C (2023) Data-driven approaches for characterization of aerodynamics on super high-speed elevators. ASME J Comput Inf Sci Eng 23(3):1–9. https://doi.org/10.1115/1.4054869
Tao F, Sui F, Liu A, Qi Q, Zhang M, Song B, Guo Z, Lu SCY, Nee AYC (2019) Digital twin-driven product design framework. Int J Prod Res 57(12):3935–3953. https://doi.org/10.1080/00207543.2018.1443229
Kapteyn MG, Pretorius JVR, Willcox KE (2021) A probabilistic graphical model foundation for enabling predictive digital twins at scale. Nat Comput Sci 1(5):337–347. https://doi.org/10.1038/s43588-021-00069-0
Kapteyn MG, Willcox KE (2022) Design of digital twin sensing strategies via predictive modeling and interpretable machine learning. J Mech Des 144(9):1–15. https://doi.org/10.1115/1.4054907
Zheng Y (2015) Stability analysis and design optimization for the high-speed elevator car fairing dynamics parameters. MA thesis. https://kns.cnki.net/KCMS/detail/detail.aspx?dbname=CMFD201601&filename=1015630322.nh. Accessed 12 Mar 2023
Li S (2017) Modeling and compensation design of air pressure variation in high-speed elevator car and its application. MA thesis. https://kns.cnki.net/KCMS/detail/detail.aspx?dbname=CMFD201701&filename=1017047268.nh. Accessed 12 Mar 2023
Wang X (2019) Study on aerodynamic characteristic optimization and performance evaluation method of high speed elevator. MA thesis. https://kns.cnki.net/KCMS/detail/detail.aspx?dbname=CMFD201901&filename=1019038736.nh. Accessed 12 Mar 2023
Tao F, Zhang H, Liu A, Nee AYC (2019) Digital twin in industry: state-of-the-art. IEEE Trans Ind Inf 15(4):2405–2415. https://doi.org/10.1109/TII.2018.2873186
Liu M, Fang S, Dong H, Xu C (2021) Review of digital twin about concepts, technologies, and industrial applications. J Manuf Syst 58:346–361. https://doi.org/10.1016/j.jmsy.2020.06.017
Semeraro C, Lezoche M, Panetto H, Dassisti M (2021) Digital twin paradigm: a systematic literature review. Comput Ind 130:103469. https://doi.org/10.1016/j.compind.2021.103469
Lo C, Chen C, Zhong RY (2021) A review of digital twin in product design and development. Adv Eng Inf 48:101297. https://doi.org/10.1016/j.aei.2021.101297
Glaessgen E, Stargel D (2012) The digital twin paradigm for future NASA and U.S. Air Force Vehicles. In: 53rd AIAA/ASME/ASCE/AHS/ASC Struct Dyn Mater Conf. https://doi.org/10.2514/6.2012-1818
Tao F, Cheng J, Qi Q, Zhang M, Zhang H, Sui F (2018) Digital twin-driven product design, manufacturing and service with big data. Int J Adv Manuf Technol 94(9–12):3563–3576. https://doi.org/10.1007/s00170-017-0233-1
Wagner S, Milde M, Felicien BM, Reinhart G (2021) Digital twin design in production. CARV MCPC 2021. https://doi.org/10.1007/978-3-030-90700-6_38
Schleich B, Anwer N, Mathieu L, Wartzack S (2017) Shaping the digital twin for design and production engineering. CIRP Ann 66(1):141–144. https://doi.org/10.1016/j.cirp.2017.04.040
Bomström H, Annanperä E, Kelanti M, Xu Y, Mäkelä S, Immonen M, Siirtola P, Teern A, Liukkunen K, Päivärinta T (2022) Digital twins about humans—design objectives from three projects. ASME. J Comput Inf Sci Eng 22(5):050907. https://doi.org/10.1115/1.4054270
Lai X, He X, Wang S, Wang X, Sun W, Song X (2022) Building a lightweight digital twin of a crane boom for structural safety monitoring based on a multifidelity surrogate model. J Mech Des 144(6). https://doi.org/10.1115/1.4053606
Wang S, Lai X, He X, Qiu Y, Song X (2021) Building a trustworthy product-level shape-performance integrated digital twin with multifidelity surrogate model. J Mech Des 144(3). https://doi.org/10.1115/1.4052390
Chua PC, Moon SK, Ng YT, Ng HY (2021) A surrogate model to predict production performance in digital twin-based smart manufacturing. J Comput Inf Sci Eng 22(3):031007. https://doi.org/10.1115/1.4053038
Lim KYH, Zheng P, Chen CH, Huang L (2020) A digital twin-enhanced system for engineering product family design and optimization. J Manuf Syst 57:82–93. https://doi.org/10.1016/j.jmsy.2020.08.011
Huang S, Wang G, Yan Y (2020) Building blocks for digital twin of reconfigurable machine tools from design perspective. Int J Prod Res 60(3):942–956. https://doi.org/10.1080/00207543.2020.1847340
Dong Y, Tan R, Zhang P, Peng Q, Shao P (2021) Product redesign using functional backtrack with digital twin. Adv Eng Inf 49:101361. https://doi.org/10.1016/j.aei.2021.101361
Lin TY, Jia Z, Yang C, Xiao Y, Lan S, Shi G, Zeng B, Li H (2021) Evolutionary digital twin: A new approach for intelligent industrial product development. Adv Eng Inf 47:101209. https://doi.org/10.1016/j.aei.2020.101209
Fu Y, Zhu G, Zhu ML, Xuan FZ (2022) Digital twin for integration of design-manufacturing-maintenance: An overview. Chin J Mech Eng-En 35(1). https://doi.org/10.1186/s10033-022-00760-x
Wu Y, Zhou L, Zheng P, Sun Y, Zhang K (2022) A digital twin-based multidisciplinary collaborative design approach for complex engineering product development. Adv Eng Inf 52:101635. https://doi.org/10.1016/j.aei.2022.101635
Li S, Wang J, Rong J, Wei W (2022) A digital twin framework for product to-be-designed analysis based on operation data. Procedia CIRP 109:179–184. https://doi.org/10.1016/j.procir.2022.05.233
Bellalouna F (2021) Case study for design optimization using the digital twin approach. Procedia CIRP 100:595–600. https://doi.org/10.1016/j.procir.2021.05.129
Demirel OH, Irshad L, Ahmed S, Tumer IY (2021) Digital twin-driven human-centered design frameworks for meeting sustainability objectives. J Comput Inf Sci Eng 21(3):031012. https://doi.org/10.1115/1.4050684
Yan D, Liu Q, Leng J, Zhang D, Zhao R, Zhang H, Wei L (2021) Digital twin-driven rapid customized design of board-type furniture production line. J Comput Inf Sci Eng 21(3):031011. https://doi.org/10.1115/1.4050617
Huang S, Wang G, Lei D, Yan Y (2022) Toward digital validation for rapid product development based on digital twin: a framework. Int J Adv Manuf Technol 119:2509–2523. https://doi.org/10.1007/s00170-021-08475-4
Yan D, Sha W, Wang D, Yang J, Zhang S (2022) Digital twin-driven variant design of a 3c electronic product assembly line. Sci Rep 12:1–12. https://doi.org/10.1038/s41598-022-07894-x
Chang X, Jia X, Liu K, Hao H (2021) Knowledge-enabled digital twin for smart designing of aircraft assembly line. Assem Autom 41(4):441–456. https://doi.org/10.1108/AA-09-2020-0133
Sun X, Bao J, Li J, Zhang Y, Liu S, Zhou B (2020) A digital twin-driven approach for the assembly commissioning of high precision products. Rob Comput Integr Manuf 61:101839. https://doi.org/10.1016/j.rcim.2019.101839
Guo J, Zhao N, Sun L, Zhang S (2019) Modular based flexible digital twin for factory design. J Ambient Intell Humanized Comput 10(3):1189–1200. https://doi.org/10.1007/s12652-018-0953-6
Aderiani RA, Wärmefjord K, Söderberg R, Lindkvist L (2019) Individualizing locator adjustments of assembly fixtures using a digital twin. ASME. J Comput Inf Sci Eng 19(4):041019. https://doi.org/10.1115/1.4043529
Kombaya Touckia J, Hamani N, Kermad L (2022) Digital twin framework for reconfigurable manufacturing systems (RMSs): design and simulation. Int J Adv Manuf Technol 120:5431–5450. https://doi.org/10.1007/s00170-022-09118-y
Yang J, Langley RS, Andrade L (2022) Digital twins for design in the presence of uncertainties. Mech Syst Signal Process 179:109338. https://doi.org/10.1016/j.ymssp.2022.109338
Qiao J, Huang X, Wang J, Wong RK (2020) Dual-pisa: an index for aggregation operations on time series data. Inf Syst 87:101427. https://doi.org/10.1016/j.is.2019.101427
Wang C, Huang X, Qiao J, Jiang T, Rui L, Zhang J, Kang R, Feinauer J, McGrail KA, Wang P, Luo D, Yuan J, Wang J, Sun J (2020) Apache iotdb: time-series database for internet of things. Proc VLDB Endow 13(12):2901–2904. https://doi.org/10.14778/3415478.3415504
Tomiyama T, Gu P, Jin Y, Lutters D, Kind C, Kimura F (2009) Design methodologies: industrial and educational applications. CIRP Ann 58(2):543–565. https://doi.org/10.1016/j.cirp.2009.09.003
Gu Y, Zhang S, Qiu L (2021) Digital twin driven requirement conversion in smart customized design. IEEE Access 9:64414–64426. https://doi.org/10.1109/ACCESS.2021.3075069
Molinaro R, Singh J, Catsoulis S, Narayanan C, Lakehal D (2021) Embedding data analytics and cfd into the digital twin concept. Comput Fluids 214:104759. https://doi.org/10.1016/j.compfluid.2020.104759
Thomas J, Sinha K, Shivkumar G, Cao L, Funck M, Shang S, Nere N (2021) A cfd digital twin to understand miscible fluid blending. AAPS PharmSciTech 22(3):91. https://doi.org/10.1208/s12249-021-01972-5
Watanabe S, Hiroyasu T, Miki M (2002) Ncga: Neighborhood cultivation genetic algorithm for multi-objective optimization problems. In: GECCO: Proc Genet Evol Comput Conf, pp 458–465
Deb K, Pratap A, Agarwal S, Meyarivan T (2002) A fast and elitist multiobjective genetic algorithm: Nsga-ii. IEEE Tran Evol Comput 6(2):182–197. https://doi.org/10.1109/4235.996017
Tiwari S, Koch P, Fadel G, Deb K (2008) Amga: an archive-based micro genetic algorithm for multi-objective optimization. In: GECCO’ 08: Proc Annu Conf Genet Evolut Comput, pp 729–736. https://doi.org/10.1145/1389095.1389235
Acknowledgements
We thank Dr. Qin Zhang for his constructive advice.
Funding
This study is financially supported by the National Natural Science Foundation of China (Grant no. 51935007), Shanghai Municipal Science and Technology Major Project (Grant No. 2021SHZDZX0102), and the State Key Laboratory of Mechanical System and Vibration Project (Grant no. MSVZD202108).
Author information
Authors and Affiliations
Contributions
Jingren Xie: writing—original draft, methodology. Chengjin Qin: writing—review and editing. Chengliang Liu: conceptualization, supervision. Zhinan Zhang: validation, supervision. Shuang Xu: formal analysis. Longye Chen: investigation.
Corresponding author
Ethics declarations
Conflict of interest
The authors declare no competing interests.
Additional information
Publisher’s Note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
Springer Nature or its licensor (e.g. a society or other partner) holds exclusive rights to this article under a publishing agreement with the author(s) or other rightsholder(s); author self-archiving of the accepted manuscript version of this article is solely governed by the terms of such publishing agreement and applicable law.
About this article
Cite this article
Xie, J., Chen, L., Xu, S. et al. Digital twin-driven design for elevator fairings via multi-objective optimization. Int J Adv Manuf Technol 131, 1413–1426 (2024). https://doi.org/10.1007/s00170-024-13049-1
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-024-13049-1