Abstract
The impedance matching of spherical focused ultrasonic transducer is one of the primary factors affecting the energy utilization efficiency in focused ultrasonic flow polishing system. To realize the efficient utilization of the vibration energy of the transducer, the front matching layer structure is design to achieve the impedance matching of the transducer and the abrasive flow liquid, thereby improving the transmittance of the transducer vibration energy in the liquid, and the back-matching layer structure is used to reflect the radiated vibration energy on the back of the transducer to reduce dissipation of radiated vibration energy on the back of the transducer. Based on the acoustic impedance matching theory and Kirchhoff’s theory, the influence of the front and back impedance matching structure of spherical focused ultrasonic transducer on the focal point sound pressure is studied theoretically, and experimentally, a novel impedance matching structure for spherical focused ultrasonic transducer is proposed. The experimental results showed that the focal point sound pressure was increased by 72.03% compared with that of the traditional structure.
Similar content being viewed by others
References
Zhou Y, Ji X, Niu JM, Sun TT, Qian ZX, Li YH, Yuan JJ, Fan Q, Huang QW, Bai JF, Wang YD (2021) Ultrasound-guided high-intensity focused ultrasound for devascularization of uterine fibroid: a feasibility study. Ultrasound Med Biol 47:2622–2635
Rachidi E, Delaunois D (2019) Effectiveness of phased array focused ultrasound and active infrared thermography methods as a nondestructive testing of Ni-WC coating adhesion. Nondestruct Test Eval 34:205–220
Cao HQ, Guo SF, Zhang SX, Xie YF, Feng W (2021) Ray tracing method for ultrasonic array imaging of CFRP corner part using homogenization method. NDT E Int 122:102493
Li H, Ren K, Yin Z, Dai CW, Wang ZW, Wei L, Wei D (2021) Review of ultrasonic vibration-assisted abrasive flow polishing technology. J Mech Eng 57:233–253
Wu Y, Fei CL, Yang XY, Chen J, Zhou QF (2019) Research status and development of focused ultrasonic transducers. Piezoelectrics Acoustooptic 41:904–909
Toda M, Thompson M (2012) Detailed investigations of polymer/metal multilayer matching layer and backing absorber structures for wideband ultrasonic transducers. IEEE T Ultrason Ferroelectr 59:231–242
Fu L, Gao YL, Gao JM (2019) Study on the influence of backing on radiation efficiency of ultrasonic transducer. Acta Acustica 44:251–257
Zhang JY, Yin GJ, Guo JZ (2019) Study on the influence of backing on radiation efficiency of ultrasonic transducer. 2019 Shanghai-Xi 'an Acoustical Society 6th Acoustics Academic Exchange Conference Proceedings 4
Liu K, Wang G, Guo JZ (2019) Optimum design of matching layer of concave spherical ultrasonic focusing transducer. 2019 National Acoustics Conference. Shenzhen, Guangdong, China 2
Cheng JZ, Zhou YL, Mao YX, Zhang DJ (2008) Sound fields in a concave spherical transducer with linear superposition of Rayleigh integrals. Chin J Comput Phys 4:493–498
Wang ZW, Li H, Wang BF, Xie O, Ren K (2019) Numerical simulation and measurement of acoustic pressure of focused ultrasonic vibration spherical shell. J Mech Electr Eng 36:949–953
Tan B, Chen Y, Li PC, Huang R, Chen H (2012) Study on the acoustic energy characteristic of PZT based backing structure on thickness vibration mode. Chinese J Appl Mech 29:32–37
Rathod VT (2020) A review of acoustic impedance matching techniques for piezoelectric sensors and transducers. Sensors 20:1–65
Zhang JC, Yang SP, Hao LJ, Gu XH (2018) A study on sound pressure transmission coefficient of elastic wave propagation to acoustic emission sensors. J Vib Shock 37:153–158
He YB, Gao TW, Guo A, Qiao TX, He CX, Wang GS, Liu XN, Yang XT (2021) Lubricant film thickness measurement based on ultrasonic reflection coefficient phase shift. Tribology 41:1–8
Funding
This work was supported by the National Natural Science Foundation of China [51905363], the Natural Science Foundation of Jiangsu Province [BK20190940], the and Master Research Startup Project of Suzhou University of Science and Technology.
Author information
Authors and Affiliations
Contributions
Li Wei: conceptualization, investigation, methodology, and writing original draft preparation. Hua Li: investigation and writing original draft preparation. Dong Wei: validation.
Corresponding author
Ethics declarations
Ethics approval
Not applicable.
Consent for publication
All authors have read and agreed to the published version of the manuscript.
Competing interests
The authors declare no competing interests.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Wei, L., Li, H. & Wei, D. Study on double-sided impedance matching of spherical focusing transducer in ultrasonic abrasive flow polishing system. Int J Adv Manuf Technol 120, 3287–3297 (2022). https://doi.org/10.1007/s00170-022-08972-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-022-08972-0