Abstract
This paper presents a new resistance element welding process capable of producing invisible lap joints between steel-polymer-steel composite laminates. The process involves pre-drilling a flat-bottom hole in each laminate to remove the polymer core and one of the steel sheets, and positioning a cylindrical insert inside the two adjoining holes for subsequent resistance welding. Finite element modeling is utilized to construct the weldability lobe and to identify the parameters that lead to the formation of acceptable joints. Experimental results confirm the applicability of the process to produce invisible lap joints without signs of material protrusions or local indentations resulting from squeezing the polymer out to create contact between the steel sheets. Destructive peel and shear tests allow determining the maximum forces that the joints can safely withstand and comparing their performance against alternative joined by forming lap joints in which the mechanical interlocking is also hidden inside the laminates.
Similar content being viewed by others
References
Hoffmann O (2012) Environment oriented light weight design in steel. In: Ökologischer Leichtbau in Stahl, Hannovermesse Werkstoff-Forum, Hannover, Germany.
Barabasha AV, Gavril’chenkoa EY, Gribkovb EP, Markovb OE (2014) Straightening of sheet with correction of waviness. Steel in Translation 44:916–920
ThyssenKrupp (2012) Innovative lightweight design concepts for hoods. The Project ThyssenKrupp InCar plus ATZ 10:112–114
Dillard DA (2010) Advances in structural adhesive bonding. Woodhead Publishing, Oxford
Burchitz I, Boesenkool R, van der Zwaag S, Tassoul M (2005) Highlights of designing with Hylite – a new material concept. Mater Des 26:271–279
Chastel Y, Passemard L (2015) Joining technologies for future automobile multi-material modules. ICTP 2014 - The 11th International Conference on Technology of Plasticity. Procedia Engineering 81: 2104–2110.
Tanco JS, Nielsen CV, Chergui A, Zhang W, Bay N (2015) Weld nugget formation in resistance spot welding of new lightweight sandwich material. Int J Adv Manuf Technol 80:1137–1147
Kustron P, Korzeniowski M, Piwowarczyk T, Sokołowski P (2021) Development of resistance spot welding processes of metal–plastic composites. Materials 14:3233
Oliveira JP, Ponder K, Brizes E, Abke T, Edwards P, Ramirez AJ (2019) Combining resistance spot welding and friction element welding for dissimilar joining of aluminum to high strength steels. Journal of Materials Processing Technology 273:116192
Meschut G, Hahn O, Janzen V, Olfermann T (2014) Innovative joining technologies for multi-material structures. Welding in the World 58:65–75
Holtschke N, Jüttner S (2017) Joining lightweight components by short-time resistance spot welding. Welding in the World 61:413–421
Schmal C, Meschut G (2020) Process characteristics and influences of production-related disturbances in resistance element welding of hybrid materials with steel cover sheets and polymer core. Welding in the World 64:437–448
Santos IO, Zhang W, Gonçalves VM, Bay N, Martins PAF (2004) Weld bonding of stainless steel. Int J Mach Tools Manuf 44:1431–1439
Salonitis K, Drougas D, Chryssolouris G (2010) Finite element modelling of penetration laser welding of sandwich materials. Phys Procedia 5:327–335
Alves LM, Afonso RM, Pereira PT, Martins PAF (2021) Double-sided self-pierce riveting of dissimilar materials. International Journal of Advanced Manufacturing Technology. (https://doi.org/10.1007/s00170-021-07426-3)
Baptista RJS, Pragana JPM, Bragança IMF, Silva CMA, Martins PAF (2020) Joining metal-polymer sandwich composite sheets with mechanical nuggets. CIRP Ann 69:249–252
Baptista RJS, Pragana JPM, Bragança IMF, Silva CMA, Martins PAF (2021) Invisible mechanical lap joints for metal–polymer laminates. Journal of Materials: Design and Applications 235:320–328
Nielsen CV, Zhang W, Alves LM, Bay N, Martins PAF (2013) Coupled finite element flow formulation. In: Modelling of thermo-electro-mechanical manufacturing processes with applications in metal forming and resistance welding, Springer-Verlag, London, UK.
AWSD8.9M (2012) Test methods for evaluating the resistance spot welding behaviour of automotive sheet steel materials. American Welding Society, Miami
Funding
The research was supported by the Fundação para a Ciência e a Tecnologia of Portugal and IDMEC under LAETA—UIDB/50022/2020.
Author information
Authors and Affiliations
Contributions
Calado FN: investigation, numerical modeling, experimentation, visualization. Pragana JPM: investigation, numerical modeling, experimentation, visualization. Bragança IMF: conceptualization, investigation, methodology. Silva CMA: conceptualization, investigation, methodology, supervision. Martins PAF: conceptualization, funding acquisition, supervision, writing—original draft.
Corresponding author
Ethics declarations
Competing interests
The authors have no competing interests or conflicts of interest to declare that are relevant to the contents of this article.
Data availability
Authors confirm that the data and material supporting the findings of this work are available within the article.
Ethical approval
The article follows the guidelines of the Committee on Publication Ethics (COPE) and involves no studies on human or animal subjects.
Additional information
Publisher's note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Calado, F.N., Pragana, J.P.M., Bragança, I.M.F. et al. Resistance element welding of sandwich laminates with hidden inserts. Int J Adv Manuf Technol 118, 1565–1575 (2022). https://doi.org/10.1007/s00170-021-08063-6
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-021-08063-6