Abstract
The intelligent welding robots have been widely developed and applied into the industrial production lines to improve the manufacturing efficiency. The main and important factor to improve the robotic welding performance, quality, and intelligence is the seam recognition accuracy. Higher industrial production and demands of higher precision in gas metal arc welding (GMAW) process have increased robot use. Vision feedback in robotic welding provides flexibility, productivity, and precision and promotes vaster range of applicability. In this case, machine vision techniques that are widely used to identify and locate the welding seam allow planning an industrial robot path. Previous investigations have proposed various approaches to address the precise tracking of welding seam curve. In majority of cases, the simultaneous uses of laser-based and optical lighting approaches to determine the location of the seam were suggested. However, complex seams remain a big challenge in robotic welding, and no definite way has been proposed to produce a precise robot path. This paper aims to develop a comprehensive robot trajectory extraction method for complex welding seam through processing of noisy images and laser data. Since the structured light on laser basis and stereo vision propose more possibility in specifying the place of the seam, this study considers a two-source processing for GMAW. A new improved edge detection algorithm is also proposed to enclose the weld zone and determine the seam and the pool parameters. To evaluate the performance of this method, experimenting different types of work pieces under random welding conditions are carried out, and the results are verified. A considerable improvement in speed and detection of error between the measured and real seam coordinates is reported.
Similar content being viewed by others
References
Chen B, Feng J (2014) Modeling of underwater wet welding process based on visual and arc sensor. Ind Robot 41(3):311–317
Chen, S.B., Zhang, Y., Qiu, T. et al. (2003) " Robotic welding systems with vision-sensing and self-learning neuron control of arc welding dynamic process": Journal of Intelligent and Robotic Systems 36, 191–208.
Shao WJ, Liu XF, ZiJun W (2019) A robust weld seam detection method based on particle filter for laser welding by using a passive vision sensor. Int J Adv Manuf Technol 104(5-8):2971–2980
Wei S, Kong M, Lin T, Chen S (2011) Three-dimensional weld seam tracking for robotic welding by composite sensing technology. Ind Robot 38(5):500–508
Rout A, Deepak BBVL, Biswal BB (2019) Advances in weld seam tracking techniques for robotic welding: a review. Robot Comput Integr Manuf 56:12–37
Ye Z, Fang G, Chen S, Zou JJ (2013) Passive vision based seam tracking system for pulse-MAG welding. Int J Adv Manuf Technol 67:1987–1996
Zhang Z, Yu H, Lv N, Chen S (2013) Real-time defect detection in pulsed GTAW of Al alloys through on-line spectroscopy. J Mater Process Technol 213(7):1146–1156
Lv N, Xu Y, Zhang Z, Wang J, Chen B, Chen S (2013) Audio sensing and modeling of arc dynamic characteristic during pulsed Al alloy GTAW process. Sens Rev 33(2):141–156
Zhang Y, Gao X (2014) Analysis of characteristics of molten pool using cast shadow during high-power disk laser welding. Int J Adv Manuf Technol 70:1979–1988
Chen Z, Gao X (2014) Detection of weld pool width using infrared imaging during high-power fiber laser welding of type 304 austenitic stainless steel. Int J Adv Manuf Technol 74:1247–1254
Gu WP, Xiong ZY, Wan W (2013) Autonomous seam acquisition and tracking system for multi-pass welding based on vision sensor. Int J Adv Manuf Technol 69:451–460
Fang Z, Xu D, Tan M (2011) A vision-based self-tuning fuzzy controller for fillet weld seam tracking. IEEE/ASME Transactions on Mechatronics 16(3):540–550
Tian Y-Z, Liu H-F, Li L, Wang W-B, Feng J-C, Xi F-F, Yuan G-J (2020) Robust identification of weld seam based on region of interest operation. Adv Manuf 8(4):473–485
Zou Y, Wang Y, Zhou W, Chen X (2018) Real-time seam tracking control system based on line laser visions. Opt Laser Technol 103:182–192
Wu K, Wang T, He J, Liu Y, Jia Z (2020) Autonomous seam recognition and feature extraction for multi-pass welding based on laser stripe edge guidance network. Int J Adv Manuf Technol 111(9):2719–2731
Yang L, Liu Y, Peng J (2020) Advances techniques of the structured light sensing in intelligent welding robots: a review. Int J Adv Manuf Technol:1–20
Huang Y et al (2017) A novel dual-channel weld seam tracking system for aircraft T-joint welds. Int J Adv Manuf Technol 91(1-4):751–761
Zhang L, Ke W, Ye Q, Jiao J (2014) A novel laser vision sensor for weld line detection on wall-climbing robot. Opt Laser Technol 60:69–79
Shao WJ, Yu H, Zhang Y (2018) A novel weld seam detection method for space weld seam of narrow butt joint in laser welding. Opt Laser Technol 99:39–51
Xu Y, Fang G, Lv N, Chen S, Jia Zou J (2015) Computer vision technology for seam tracking in robotic GTAW and GMAW. Robot Comput Integr Manuf 32:25–36
Xue B et al (2019) A vision based detection method for narrow butt joints and a robotic seam tracking system. Sensors 19.5:1144
Fang Z, Xu D, Tan M (2010) A vision-based self-tuning fuzzy controller for fillet weld seam tracking. IEEE/ASME Transactions on mechatronics 16(3):540–550
Xu Y, Yu H, Zhong J, Lin T, Chen S (2012) Real-time seam tracking control technology during welding robot GTAW process based on passive vision sensor. J Mater Process Technol 212(8):1654–1662
Lee J-P et al (2014) A study on optimal algorithms to find joint tracking in GMA welding. Int J Eng Sci Innov Technol 3:370–380
Iakovou D, Aarts R, Meijer J (2005) Sensor integration for robotic laser welding processes. International Congress on Applications of Lasers & Electro-Optics. Vol. 2005. No. 1. Laser Institute of America
Bandari YK, Williams SW, Ding J, Martina F (2015) Additive manufacture of large structures: Robotic or CNC systems. Proceedings of the 26th International Solid Freeform Fabrication Symposium, pp.12-14
Dennis JH et al (1997) The effects of welding parameters on ultraviolet light emissions, ozone and CrVI formation in MIG welding. The Annals of occupational hygiene 41(1):95–104
Agapiou G, Kasiouras C, Serafetinides AA (1999) A detailed analysis of the MIG spectrum for the development of laser-based seam tracking sensors. Opt Laser Technol 31(2):157–161
Zou Y, Chen T (2018) Laser vision seam tracking system based on image processing and continuous convolution operator tracker. Opt Lasers Eng 105:141–149
Xiao R et al (2019) An adaptive feature extraction algorithm for multiple typical seam tracking based on vision sensor in robotic arc welding. Sensors Actuators A Phys 297:111533
Wang, Nianfeng et al (2020) A robust weld seam recognition method under heavy noise based on structured-light vision. Robot Comput Integr Manuf 61:101821
He Y, Xu Y, Chen Y, Chen H, Chen S (2016) Weld seam profile detection and feature point extraction for multi-pass route planning based on visual attention model. Robot Comput Integr Manuf 37:251–261
Xu Y, Lv N, Zhong J, Chen H, Chen S (2012) Research on the real-time tracking information of three-dimension welding seam in robotic GTAW process based on composite sensor technology. J Intell Robot Syst 68(2):89–103
Xu Y, Lv N, Fang G, du S, Zhao W, Ye Z, Chen S (2017) Welding seam tracking in robotic gas metal arc welding. J Mater Process Technol 248:18–30
Wang Q, Cheng Y, Jiao W, Johnson MT, Zhang YM (2019) Virtual reality human-robot collaborative welding: a case study of weaving gas tungsten arc welding. J Manuf Process 48:210–217
Xu Y, Fang G, Chen S, Zou JJ, Ye Z (2014) Real-time image processing for vision-based weld seam tracking in robotic GMAW. Int J Adv Manuf Technol 73(9-12):1413–1425
Ye Z, Fang G, Chen S, Dinham M (2013) A robust algorithm for weld seam extraction based on prior knowledge of weld seam. Sens Rev 33(2):125–133
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Banafian, N., Fesharakifard, R. & Menhaj, M.B. Precise seam tracking in robotic welding by an improved image processing approach. Int J Adv Manuf Technol 114, 251–270 (2021). https://doi.org/10.1007/s00170-021-06782-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-021-06782-4