Correction to: Holistic sustainability assessment of hybrid Al-GnP enriched nanofluids and textured-tool in machining of Ti-6Al-4V alloy

Correction to: Int J Adv Manuf Technol

https://doi.org/10.1007/s00170-020-06371-x

The original version of this article, unfortunately contained errors about funding and affiliation. The following is the list of errors and their correct presentation.

Affiliation:

¹Key Laboratory of High Efficiency and Clean Mechanical Manufacture, Ministry of Education, School of Mechanical Engineering, Shandong University, P.R. China.

²College of Mechanical and Electrical Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing, 210016, China.

³Faculty of Mechanical Engineering, GIK Institute of Engineering Sciences & Technology, Topi 23460, Pakistan

⁴Industrial Engineering Department, College of Engineering, King Saud University, Riyadh-11421, Saudi Arabia

⁵Raytheon Chair for Systems Engineering (RCSE), Advanced Manufacturing Institute, King Saud University, Riyadh-11421, Saudi Arabia

Funding:

The authors are grateful to the Raytheon Chair for Systems Engineering (RCSE) for funding.

Acknowledgment:

The authors are grateful to the Raytheon Chair for Systems Engineering (RCSE) for funding. The authors are also thankful to Nanjing University of Aeronautics & Astronautics, PR China, and the GIK Institute, Pakistan for technical assistance and resources provision. The authors would like to acknowledge the efforts made by Dr. Munish Kumar Gupta and Mr. Mozammel Mia for their valuable suggestion to improve the manuscript.