Abstract
This study investigates the flow velocity effect on the hygrothermal behavior of the polyester glass fiber composite. The composite material contains fillers additives aluminum silicate pigments (ASP 400). They are exposed to humidity under different temperatures. The humidity concentration is higher on the surface and it continuously decreases toward the core of the material. The increase of the fillers additives and the flow velocity induce an augmentation of the diffusion coefficient and the amount of absorbed humidity. At a high temperature, the absorption curve presents a fall, and it is due to the coalescence of the crack, which propagates inside the material, decreasing the rigidity of the material. The finite element method is used to simulate the humidity diffusion through composite material. The comparison between the experimental and numerical results shows that the model can predict the hygrothermal behavior of the polyester/glass fiber taking in account the flow velocity factor.
Similar content being viewed by others
References
Zang Z, Zeng X, Wang M, Hu W, Liu C, Tang X (2017) Tunable photoluminescence of water-soluble AgInZnS-graphene oxide ( GO ) nanocompositesand their application in-vivo bioimaging. Sensors Actuators B Chem 252:1179–1186
Huang H, Zhang J, Jiang L, Zang Z (2017) Preparation of cubic Cu 2 O nanoparticles wrapped by reduced graphene oxide for the ef fi cient removal of rhodamine B. J Alloys Compd 718:112–115
Jing wei AXT, Zang Z, Zhang Y, Wang M, DU J (2017) Enhanced performance of light-controlled conductive switching in hybrid cuprous oxide / reduced graphene oxide ( Cu 2 O / rGO ) nanocomposites. Opt Lett 42(5):911–914
Bonniau P, Bunsell AR (1981) A Comparative study of water absorption theories applied to glass epoxy composites. J Compos Mater 15(3):272–293
Barjasteh E, Nutt SR (2012) Moisture absorption of unidirectional hybrid composites. Compos Part A Appl Sci Manuf 43(1):158–164
Eslami S, Taheri-Behrooz F, Taheri F (2012) Effects of aging temperature onmoisture absorption of perforated GFRP. Adv Mater Sci Eng 2012:1–7
Huang G, Sun H (2007) Effect of water absorption on the mechanical properties of glass/polyester composites. Mater Des 28(5):1647–1650
Pilli SP, Smith LV (2012) The effect of pressure on moisture diffusion in polymer matrix composites. Int J Thermophys 33(8–9):1715–1725
M. F. P. Davies, Choqueuse D., “Composites underwater,” in Durability Analysis of Composites Systems, 1997, pp. 19–24.
Humeau C, Davies P, Jacquemin F (2016) Moisture diffusion under hydrostatic pressure in composites. Mater Des 96:90–98
Carrascal I, Casado JA, Polanco JA, Gutie F (2005) Absorption and diffusion of humidity in fiberglass- reinforced polyamide. Polym Compos 26:580–586
Ounaies M, Harchay M, Dammak F, Ben Daly H (2018) Prediction of hygrothermal behavior of polyester/glass fiber composite in dissymmetric absorption. J Compos Mater 52(29):4001–4007
Ben Daly H, Harchay M, Belhadjsalah H, Boukhili R (2009) Experimental characterization and numerical simulation of the humidity absorption process in glass reinforced composites under dissymmetric exposure conditions. Polym Compos 28:355–364
Zhou J, Lucas JP (1995) The effects of a water environment on anomalous absorption behavior in graphite/epoxy composites. Compos Sci Technol 53:57–64
Boukhili R, Boukehili H, Ben Daly H, Inge END (2006) Physical and mechanical properties of pultruded composites containing fillers and low profile additives. Polym Compos 27:71–81
Ben Daly H, Ben Brahim H, Hfaied N, Harchay M, Boukhili R (2007) Investigation of water absorption in pultruded composites containing fillers and low profile additives. Polym Compos 28:355–364
Naceri A (2009) An analysis of moisture diffusion according to Fick’s law and the tensile mechanical behavior of a glass-fabric-reinforced composite. Mech Compos Mater 45(3):331–336
Jost W (1960) Diffusion in solids, liquids, gases. Academic Press, New York
D. S. Simulia, ABAQUS / CAE User ’s Manual. 2014.
Simulia DS (2014) Abaqus Analysis User’s Guide, vol. I.
Kang H, Hart CA (1997) Temperature effect on diffusion coefficient in drying wood. Wood Fiber Sci 29:325–332
(1967) and R. C. W. K. H. G. Ashbee, Frederick Charles Frank, proceedings of the royal society, vol. 300.
Author information
Authors and Affiliations
Corresponding author
Additional information
Publisher’s note
Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Rights and permissions
About this article
Cite this article
Ounaies, M., Harchay, M., Dammak, F. et al. Numerical simulation of humidity diffusion through the polyester/glass fiber composite. Int J Adv Manuf Technol 105, 4237–4243 (2019). https://doi.org/10.1007/s00170-019-04411-9
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-019-04411-9