Abstract
With the rapid growth of individualized customer demands, manufacturers are supposed to pay more attention to the interaction between service and product. In this context, the concept called service-oriented manufacturing (SOM) has been promoted. Postponement strategy, while has already been widely studied in manufacturing systems, still lacks being well understood about its operations mechanism for SOM. Therefore, the purpose of this paper is to provide a further insight into an operations mechanism in which SOM can be driven by postponement strategy. Firstly, by analyzing the characteristics of postponement strategy and SOM, the hypothesis that postponement strategy can support SOM is theoretically approved. Then, to better reveal its operations mechanism, an innovative model is constructed. In this model, non-differentiated and differentiated products are compared, service time is introduced as a sensitive factor, and an approach incorporating customer satisfaction is proposed. Taking advantages of these innovation points, the customer order fulfilling time can be easily analyzed in the SOM system applied postponement strategy. The research results show that the cost of customer interaction could be reduced through the adjustment activities before customer order decoupling point, and the degree of product customization could be increased by interactive activities after customer order decoupling point. Both of them would enable manufacturers to better respond to customized demands.
Article PDF
Similar content being viewed by others
Avoid common mistakes on your manuscript.
References
Ferreira KA, Tomas RN, Alcântara RLC (2015) A theoretical framework for postponement concept in a supply chain. Int J Log Res Appl 18(1):46–61
Graman GA (2010) A partial-postponement decision cost model. Eur J Oper Res 201(1):34–44
Luo JQ, Zhao YP, Song HM (2010) Implementation mechanism and application of postponement strategy under service-oriented manufacturing environment. Chin Mech Eng 21(22):2693–2698
Karmakar U (2004) Will you survive the services revolution? Harv Bus Rev 82(6):100–107
Wang K, Jiang Z, Li N, Geng N (2013) Optimal production and admission control for a stochastic SOM system with demands for product and PSS. Int J Prod Res 51(23–24):7270–7288
Hobo MS, Watanabe CH, Chen CJ (2006) Double spiral trajectory between retail, manufacturing and customers leads a way to service-oriented manufacturing. Technovation 26(7):873–890
Van Hoek RI (2001) The rediscovery of postponement a literature review and directions for research. J Oper Manag 19(2):161–184
Garg A, Tang CS (1997) On postponement strategies for product families with multiple points of differentiation. IIE Trans 29(8):641–650
Van Hoek RI, Van Dierdonck R (2000) Postponed manufacturing supplementary to transportation services. Transp Res E 36(3):205–217
Li J, Wang S, Cheng TCE (2008) Analysis of postponement strategy by EPQ-based models with planned backorders. Omega 36(5):777–778
Graman GA, Magazine MJ (2002) A numerical analysis of capacitated postponement. Oper Prod Manag 11(3):340–357
Zhou W, Zhang R, Zhou Y (2013) A queuing model on supply chain with the form postponement strategy. Comput Ind Eng 66(4):643–652
Jeff H, Willem S, Zhou D et al (2007) Postponement strategy from a supply chain perspective: cases from China. Int J Phys Distrib Logist Manag 37(4):331–356
Li S, Ragu-Nathan B, Ragu-Nathan TS et al (2004) The impact of supply chain management practices on competitive advantage and organizational performance. Omega 34(2):107–124
Baines TS, Lightfoot HW, Benedettini O, Kay JM (2009) The servitization of manufacturing: a review of literature and reflection on future challenges. J Manuf Technol Manag 20(5):547–567
Vandermerwe S, Rada J (1988) Servitization of business: adding value by adding services. Eur Manag J 6(4):314–324
Vargo SL, Lusch RF (2004) Evolving to a new dominant logic for marketing [J]. J Mark 68(1):1–17
Beuren FH, Ferreira MG, Paulo A et al (2013) Product-service systems: a literature review on integrated products and services. J Clean Prod 47(5):222–231
Grönroos C (2008) Service logic revisited: who creates value? And who co-creates? Eur Bus Rev 20(4):298–314
Schmenner RW (2009) Manufacturing, service, and their integration: some history and theory. Int J Oper Prod Manag 29(5):431–443
Gao J, Yao Y, Zhu VC et al (2011) Service-oriented manufacturing: a new product pattern and manufacturing paradigm. J Intell Manuf 22(3):435–446
Zhen L (2012) An analytical study on service-oriented manufacturing strategies. Int J Prod Econ 139(1):220–228
Hanafy M, Elmaraghy H (2015) Developing assembly line layout for delayed product differentiation using phylogenetic networks. Int J Prod Res 53(9):2633–2651
Acknowledgements
The authors express sincere thanks to the editor(s) and anonymous reviewers of IJAMT for their careful reading and suggestions in improving the quality of this paper.
Funding
The paper is supported by the National Natural Science Foundation of China (Nos. 71772080 and 71472077).
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Luo, J., Zhang, Q. Operations mechanism of postponement strategy for service-oriented manufacturing. Int J Adv Manuf Technol 104, 3335–3341 (2019). https://doi.org/10.1007/s00170-018-3092-5
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-018-3092-5