To produce ultra-high-strength steel parts for improving fuel consumption and collision safety of automobiles, a compact hot-stamping process having resistance heating was developed. In this process, a blanking operation was introduced immediately after heating to deal with non-rectangular blanks in resistance heating. By blanking, not only were the blank shapes optimised for stamping but the formability was also improved by removing both non-heating edges in contact with the electrode. A rectangular quenchable steel sheet was resistance-heated; the sheet was immediately blanked into the desired shape, and the blank was hot-stamped. In addition, reinforcements used for a body-in-white were hot-stamped using the proposed process to examine the applicability. The reduction in thickness of the hot-stamped reinforcement using a hot-blanked sheet was reduced compared with that using a rectangular blank. The formability was improved by blanking immediately after heating. Moreover, ultrasonic cleaning with diluted hydrochloric acid removed the thin oxide scale caused by resistance heating, and the spot-resistance weldability and electrodeposition paintability were improved. Blanking immediately after heating and ultrasonic cleaning are useful for practical hot-stamping processes using resistance heating.
This is a preview of subscription content, log in to check access.
Buy single article
Instant access to the full article PDF.
Price includes VAT for USA
Subscribe to journal
Immediate online access to all issues from 2019. Subscription will auto renew annually.
This is the net price. Taxes to be calculated in checkout.
Jhajj KS, Slezak SR, Daun KJ (2015) Inferring the specific heat of an ultra high strength steel during the heating stage of hot forming die quenching, through inverse analysis. Appl Therm Eng 83:98–107. https://doi.org/10.1016/j.applthermaleng.2015.03.013
Ebner FJ (2013) The HotPHASE multi-level chamber furnace—concept, advantages and experiences from production. Proceedings of 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel: 199–204
Lee EH, Hwang JS, Lee CW, Yang DY, Yang WH (2014) A local heating method by near-infrared rays for forming of non-quenchable advanced high-strength steels. J Mater Process Technol 214(4):784–793. https://doi.org/10.1016/j.jmatprotec.2013.11.023
Siebert P, Alsmann M, Watermeier HJ (2011) Influence of different heating technologies on the coating properties of hot-dip aluminized 22MnB5. Proceedings of 3rd International Conference on Hot Sheet Metal Forming of High-Performance Steel:457–464
Kolleck R, Veit R, Merklein M, Lechler J, Geiger M (2009) Investigation on induction heating for hot stamping of boron alloyed steels. CIRP Ann Manuf Technol 58(1):275–278. https://doi.org/10.1016/j.cirp.2009.03.090
Vibrans T, Malek R, Kotzian M, Vogt C, Langejürgen M (2016) Entwicklung einer anlage zur induktiven erwärmung von formplatinen ewi—elektrowärme international 74(1):39–44
Dietrich A., Nacke B, Pfeifer F, Marten T, Tröster T (2017), Investigation of geometrical discontinuities in blanks for hot sheet metal forming process under the influence of induction heating. 5th International Conference on Steels in Cars and Trucks (5th International Conference Proceedings), no page numbers
Ploshikhin V, Plihodovsky A, Kaiser J., Bisping R, Lindner H, Lengsdorf C, Roll K, (2011) New heating technology for the furnace-free press hardening process. Proceedings of Conference of Tools and Technologies for Processing Ultra High Strength Materials:191–200
Landgrebe D, Putz M, Schieck F, Sterzing A, Rennau A (2015) Towards efficient, interconnected and flexible value chains–examples and innovations from research on production technologies. Proceedings of 5th International Conference on Accuracy in Forming. Technology:61–78
Rasera JN, Field NN, D'Souza M, Daun KJ (2015) Forming tailored material properties through direct contact heating. Proceedings of 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel:509–517
Mori K, Maki S, Tanaka Y (2005) Warm and hot stamping of ultra high tensile strength steel sheets using resistance heating. CIRP Ann Manuf Technol 54(1):209–212. https://doi.org/10.1016/s0007-8506(07)60085-7
Behrens BA, Hübner S, Demir M (2008) Conductive heating system for hot sheet metal forming. Proceedings of 1st International Conference on Hot Sheet Metal Forming of High-Performance Steel:63–68
Mori K (2015) Smart hot stamping for ultra-high strength steel parts. In: Tekkaya AE, Homberg W, Brosius A (eds) 60 excellent inventions in metal forming. Springer-Verlag, pp 403–408. https://doi.org/10.1007/978-3-662-46312-3
Ozturk F, Ece RE, Polat N, Koksal A, Evis Z, Polat A (2013) Mechanical and microstructural evaluations of hot formed titanium sheets by electrical resistance heating process. Mat Sci Eng A-Struct 578:207–214. https://doi.org/10.1016/j.msea.2013.04.079
Liang WK, Liu Y, Zhu B, Zhou ML, Zhang YS (2015) Conduction heating of boron alloyed steel in application for hot stamping. Int J Precis Eng Manuf 16(9):1983–1992. https://doi.org/10.1007/s12541-015-0258-z
Mori K, Maeno T, Fukui Y (2011) Spline forming of ultra-high strength gear drum using resistance heating of side wall of cup. CIRP Ann Manuf Technol 60(1):299–302. https://doi.org/10.1016/j.cirp.2011.03.144
Maeno T, Mori K, Adachi K (2014) Gas forming of ultra-high strength steel hollow part using air filled into sealed tube and resistance heating. J Mater Process Technol 214(1):97–105. https://doi.org/10.1016/j.jmatprotec.2013.08.004
Behrens BA, Hübner S, Schrodter J, Uhe J (2015) Conductive heating opens up various new opportunities in hot stamping. Proceedings of 5th international conference on accuracy in forming. Technology:157–173
Machrowicz T (2007) Method and apparatus for the uniform resistance heating of articles, US Patent: 2007/0215588 A1
Borsetto F, Ghiotti A, Bruschi S (2009) Investigation of the high strength steel Al-Si coating during hot stamping operations. Key Eng Mater 410–411:289–296
Lee CW, Fan DW, Sohn IR, Lee SJ, De Cooman BC (2012) Liquid-metal-induced embrittlement of Zn-coated hot stamping steel. Metallurgical and Materials Transactions a-Physical Metallurgy and Materials Science 43A (13): 5122–5127. doi:https://doi.org/10.1007/s11661-012-1316-0
Mori K (2007) Warm and hot stamping of ultra high strength steel sheets using rapid resistance heating. Proceedings of 2nd international conference on new forming. Technology:15–28
Hikida K, Nishibata T, Kikuchi H, Suzuki T, Nakayama N (2013) Properties of new TS 1800 MPa grade hot stamping steel and application for bumper beam. Proceedings of 4th International Conference on Hot Sheet Metal Forming of High-Performance Steel: 127–134
Han QH, Bi WZ, Jin XY, Xu WL, Wang L, Xiong XC, Wang J, Belanger P (2015) Low temperature hot forming of medium-Mn steel. Proceedings of 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel: 381–390
Badinier G, Mithieux JD, Santacreu PO, Herbelin JM (2015) Development of a 1.8 GPa martensitic stainless steel for hot stamping application. Proceedings of 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel: 715–723
Mori K, Maeno T, Yanagita Y (2016) Deep drawability and bendability in hot stamping of ultra-high strength steel parts. Key Eng Mater 716:262–269
Maeno T, Mori K, Sakagami M, Nakao Y (2015) Full hardening of products in hot stamping using rapid resistance heating, proceedings of 5th International Conference on Hot Sheet Metal Forming of High-Performance Steel: 323–330
This work was supported in part by the Amada Foundation’s Grant-supported Researches (AF-2015001).
About this article
Cite this article
Maeno, T., Mori, K., Ogihara, T. et al. Blanking immediately after heating and ultrasonic cleaning for compact hot-stamping systems using rapid resistance heating. Int J Adv Manuf Technol 97, 3827–3837 (2018). https://doi.org/10.1007/s00170-018-2232-2
- Hot stamping
- Resistance heating
- Ultrasonic cleaning