Advertisement

Advanced 3D printing technologies for the aircraft industry: a fuzzy systematic approach for assessing the critical factors

  • Yu-Cheng Wang
  • Toly Chen
  • Yung-Lan Yeh
ORIGINAL ARTICLE

Abstract

In the aircraft industry, three-dimensional (3D) printing can confer several benefits, such as shortened cycle times, reduced production costs, and lighter part weights. However, some concerns must be addressed for 3D-printing applications to be viable. This paper investigated these concerns by reviewing the current 3D printing practices in the aircraft industry. The literature review identified five factors critical to the applicability of advanced 3D printing technologies to the aircraft industry, and a fuzzy systematic approach was applied to assess the applicability and relative importance of the identified factors, combining fuzzy geometric mean and fuzzy analytical hierarchy process. The findings provide valuable input for countries or regions considering expanding 3D printing applications to their aircraft industries.

Keywords

3D printing Aircraft industry Fuzzy geometric mean Fuzzy analytical hierarchy process 

Preview

Unable to display preview. Download preview PDF.

Unable to display preview. Download preview PDF.

References

  1. 1.
    Ambrosi A, Pumera M (2016) 3D-printing technologies for electrochemical applications. Chem Soc Rev 45:2740–2755CrossRefGoogle Scholar
  2. 2.
    Armillotta A, Bianchi S, Cavallaro M, Minnella S (2017) Edge quality in fused deposition modeling: II. Experimental verification. Rapid Prototyp J 23(4):686–695.  https://doi.org/10.1108/RPJ-02-2016-0021 CrossRefGoogle Scholar
  3. 3.
    Aroca RV, Ventura CEH, De Mello I, Pazelli TF (2017) Sequential additive manufacturing: automatic manipulation of 3D printed parts. Rapid Prototyp J 23(4):653–659.  https://doi.org/10.1108/RPJ-02-2016-0029 CrossRefGoogle Scholar
  4. 4.
    Ashour OM, Kremer GEO (2013) A simulation analysis of the impact of FAHP–MAUT triage algorithm on the Emergency Department performance measures. Expert Syst Appl 40(1):177–187CrossRefGoogle Scholar
  5. 5.
    Bogue R (2013) 3D printing: the dawn of a new era in manufacturing? Assem Autom 33:307–311CrossRefGoogle Scholar
  6. 6.
    Bourell DL, Marcus HL, Barlow JW, Beaman JJ (1992) Selective laser sintering of metals and ceramics. Int J Powder Metall 28:369–381Google Scholar
  7. 7.
    Buckley JJ (1985) Fuzzy hierarchical analysis. Fuzzy Sets Syst 17(3):233–247MathSciNetCrossRefzbMATHGoogle Scholar
  8. 8.
    Budzik G (2007) Possibilities of using vacuum casting process for manufacturing cast models of turbocharger impellers. J KONES Powertrain Transp 14(2):125–130Google Scholar
  9. 9.
    Cesaretti G, Dini E, De Kestelier X, Colla V, Pambaguian L (2014) Building components for an outpost on the lunar soil by means of a novel 3D printing technology. Acta Astronaut 93:430–450CrossRefGoogle Scholar
  10. 10.
    Chen T, Lin Y-C (2017) Feasibility evaluation and optimization of a smart manufacturing system based on 3D printing. Int J Intell Syst 32:394–413CrossRefGoogle Scholar
  11. 11.
    Chen Z, Yang W (2011) An MAGDM based on constrained FAHP and FTOPSIS and its application to supplier selection. Math Comput Model 54(11):2802–2815MathSciNetCrossRefzbMATHGoogle Scholar
  12. 12.
    Conner BP, Manogharan GP, Martof AN, Rodomsky LM, Rodomsky CM, Jordan DC, Limperos JW (2014) Making sense of 3-D printing: creating a map of additive manufacturing products and services. Addit Manuf 1:64–76CrossRefGoogle Scholar
  13. 13.
    Crump SS (1992) Apparatus and method for creating three-dimensional objects Patent US5121329, http://www.google.com/patents/US5121329
  14. 14.
    Ding Y, Lan H, Hong J, Wu D (2004) An integrated manufacturing system for rapid tooling based on rapid prototyping. Robot Comput Integr Manuf 20(4):281–288CrossRefGoogle Scholar
  15. 15.
    Donachie MJ Jr (1988) Titanium. A technical guide. Metals Park, OH: ASM International, ISBN 0-87170-309-2Google Scholar
  16. 16.
    Erensal YC, Öncan T, Demircan ML (2006) Determining key capabilities in technology management using fuzzy analytic hierarchy process: a case study of Turkey. Inf Sci 176:2755–2770CrossRefGoogle Scholar
  17. 17.
    Gebhardt A (2007) Rapid prototyping-rapid tooling-rapid manufacturing. Hanser Publishers, MunichGoogle Scholar
  18. 18.
    Goel AK, McAdams DA, Stone RB (2015) Biologically inspired design. Springer, LondonGoogle Scholar
  19. 19.
    Grünberger T, Domröse R (2015) Direct metal laser sintering. Laser Tech J 12(1):45–48CrossRefGoogle Scholar
  20. 20.
    Hassanin H, Essa K, Qiu C, Abdelhafeez AM, Adkins NJE, Attallah MM (2017) Net-shape manufacturing using hybrid selective laser melting/hot isostatic pressing. Rapid Prototyp J 23(4):720–726.  https://doi.org/10.1108/RPJ-02-2016-0019 CrossRefGoogle Scholar
  21. 21.
    Helsel S (2015) Airbus’ new A350 XWB aircraft contains over 1,000 3D-printed parts. http://inside3dprinting.com/news/airbus-new-a350-xwb-aircraft-contains-over-1000-3d-printed-parts/30291/, Accessed 15 June 2017
  22. 22.
    Huang R, Riddle M, Graziano D, Warren J, Das S, Nimbalkar S, Cresko J, Masanet E (2016) Energy and emissions saving potential of additive manufacturing: the case of lightweight aircraft components. J Clean Prod 135:1559–1570CrossRefGoogle Scholar
  23. 23.
    Kochan A (2000) Magnetic pulse welding shows potential for automotive applications. Assem Autom 20:129–132CrossRefGoogle Scholar
  24. 24.
    Marks P (2011) 3D printing takes off with the world’s first printed plane. New Sci 211(2823):17–18CrossRefGoogle Scholar
  25. 25.
    Moon SK, Tan YE, Hwang J, Yoon YJ (2014) Application of 3D printing technology for designing light-weight unmanned aerial vehicle wing structures. Int J Precis Eng Manuf Green Technol 1(3):223–228CrossRefGoogle Scholar
  26. 26.
    Mueller B, Kochan D (1999) Laminated object manufacturing for rapid tooling and patternmaking in foundry industry. Comput Ind 39:47–53CrossRefGoogle Scholar
  27. 27.
    Pham DT, Gault RS (1998) A comparison of rapid prototyping technologies. Int J Mach Tools Manuf 38(10):1257–1287CrossRefGoogle Scholar
  28. 28.
    Pinkham M (2017) Aluminium’s 3D printing potential. Alum Int Today 29(1):10–12Google Scholar
  29. 29.
    Pryor S (2014) Implementing a 3D printing service in an academic library. J Libr Adm 54(1):1–10Google Scholar
  30. 30.
    Rengier F, Mehndiratta A, von Tengg-Kobligk H, Zechmann CM, Unterhinninghofen R, Kauczor H-U, Giesel FL (2010) 3D printing based on imaging data: review of medical applications. Int J Comput Assist Radiol Surg 5:335–341CrossRefGoogle Scholar
  31. 31.
    Ruoning X, Xiaoyan Z (1996) Fuzzy logarithmic least squares ranking method in analytic hierarchy process. Fuzzy Sets Syst 77:175–190MathSciNetCrossRefzbMATHGoogle Scholar
  32. 32.
    Satty TL (1980) The analytic hierarchy process. McGraw-Hill, New YorkGoogle Scholar
  33. 33.
    Smith B (2003) The Boeing 777. Adv Mater Process 161(9):41–44Google Scholar
  34. 34.
    Statista (2017) 3D printing market size worldwide from 2015 to 2020 (in billion U.S. dollars). https://www.statista.com/statistics/590113/worldwide-market-for-3d-printing/, Accessed 30 June 2017
  35. 35.
    Stefanini L, Sorini L, Guerra ML (2008) Fuzzy numbers and fuzzy arithmetic. Hand-book of granular computing, pp. 249–283Google Scholar
  36. 36.
    Torres K, Staskiewicz G, Sniezynski M, Drop A, Maciejewski R (2011) Application of rapid prototyping techniques for modelling of anatomical structures in medical training and education. Folia Morphol (Warsz) 70:1–4Google Scholar
  37. 37.
    Thomas DS, Gilbert SW (2014) Costs and cost effectiveness of additive manufacturing. NIST Special Publication 1176: 12Google Scholar
  38. 38.
    Ventola CL (2014) Medical applications for 3D printing: current and projected uses. Pharm Ther 39:704–711Google Scholar
  39. 39.
    W. Y. Liu, Y. Li, J. Y. Liu, X. F. Niu, Y. Wang, and D. Y. Li (2013) Application and performance of 3D printing in nanobiomaterials. J Nanomater, 2013, article ID 681050, 1–7Google Scholar
  40. 40.
    Weller C, Kleer R, Piller FT (2015) Economic implications of 3D printing: market structure models in light of additive manufacturing revisited. Int J Prod Econ 164:43–56CrossRefGoogle Scholar
  41. 41.
    Welte T (2016) Opinion: solving aircraft overload with 3D printing. http://aviationweek.com/connected-aerospace/opinion-solving-aircraft-overload-3d-printing, Accessed 18 June 2017
  42. 42.
    Williams G (1997) The Boeing commercial airplane engineering simulation, new airplane project, management observations. Modeling and Simulation Technologies Conference, pp. 3794Google Scholar
  43. 43.
    Zhang F, Liu S, Zhao P, Liu T, Sun J (2017) Titanium/nanodiamond nanocomposites: effect of nanodiamond on microstructure and mechanical properties of titanium. Mater Des 131:144–155CrossRefGoogle Scholar

Copyright information

© Springer-Verlag London Ltd., part of Springer Nature 2018

Authors and Affiliations

  1. 1.Chaoyang University of TechnologyTaichung, 41349Republic of China
  2. 2.Department of Industrial Engineering and ManagementNational Chiao Tung UniversityHsinchuTaiwan
  3. 3.Department of Engineering and Management of Advance TechnologyChang Jung Christian UniversityTainanTaiwan

Personalised recommendations