Abstract
Determining an appropriate scanning pattern to achieve the final desired shape is the most significant factor in 3D laser forming process. In this manuscript, attempts are made to propose the optimum radial scanning path, which produces bowl shapes. The radial scanning pattern could be used to form the bowl shapes from the circular blanks. This pattern is categorized into two groups, whether the laser scan path crosses the center of the circular plate or not. In cross scan path, three patterns of diagonal scan, convergent radial scan, and divergent radial scan are proposed. Besides, in non-cross scan path, three patterns of non-cross scan without angular step, convergent scan path with 30-degree angular step, and divergent scan path with 30-degree angular step are introduced. Based on the numerical results, convergent radial path and convergent radial path with 30-degree angular step, respectively, are selected as the best scan patterns of cross and non-cross scan lines. In the experiments, these two scan patterns were implemented on the plate surface of AISI 304 plates. Measurements showed that the non-cross convergent radial scan path with 30-degree angular step produces the most uniform final bowl shapes.
Similar content being viewed by others
References
Shen H, Yao Z (2009) Study on mechanical properties after laser forming. Opt Lasers Eng 47(1):111–117
Maji K, Pratihar D, Nath A (2013) Experimental investigations and statistical analysis of pulsed laser bending of AISI 304 stainless steel sheet. Optics & Laser Technology 49:18–27
Steen W (2003) Laser material processing—an overview. J Opt A Pure Appl Opt 5(4):S3
Roohi AH, Naeini HM, Gollo MH, Soltanpour M, Abbaszadeh M (2015) On the random-based closed-cell metal foam modeling and its behavior in laser forming process. Optics & Laser Technology 72:53–64
Shen H, Ran M, Hu J, Yao Z (2014) An experimental investigation of underwater pulsed laser forming. Opt Lasers Eng 62:1–8
Hsieh H-S, Lin J (2004) Thermal–mechanical analysis on the transient deformation during pulsed laser forming. Int J Mach Tools Manuf 44(2):191–199
A. H. Roohi, H. M. Naeini, M. H. Gollo 2015 An experimental investigation of parameters effect on laser forming of Al6061-T6 sheets, Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials Design and Applications, pp. 1464420715599181
Roohi AH, Moslemi Naeini H, Hoseinpour Gollo M, Shahbazi Karami J, Shahabad I (2016) Effects of temperature gradient magnitude on bending angle in laser forming process of aluminium alloy sheets. Journal of Computational & Applied Research in Mechanical Engineering (JCARME) 5(2):97–109
Dearden G, Edwardson S (2003) Some recent developments in two-and three-dimensional laser forming for ‘macro’and ‘micro’applications. J Opt A Pure Appl Opt 5(4):S8
K. Watkins, S. Edwardson, J. Magee, G. Dearden, P. French, R. Cooke, J. Sidhu, N. Calder 2001 Laser forming of aerospace alloys, AMTC, Seattle, Society of Automotive Engineers, Paper, No. 2001–01, pp. 2610
Liu F, Lin X, Huang C, Song M, Yang G, Chen J, Huang W (2011) The effect of laser scanning path on microstructures and mechanical properties of laser solid formed nickel-base superalloy Inconel 718. J Alloys Compd 509(13):4505–4509
S. I. Shahabad, H. M. Naeini, A. H. Roohi, A. Tavakoli, M. Nasrollahzade 2016 Experimental investigation of laser forming process to produce dome-shaped products, The International Journal of Advanced Manufacturing Technology, pp. 1–7
S. I. Shahabad, H. M. Naeini, A. H. Roohi, M. Soltanpour, A. Tavakoli 2016 Height prediction of dome-shaped products in laser forming process, The International Journal of Advanced Manufacturing Technology, pp. 1–10
L. J. Yang, Y. Wang, M. Djendel, L. Qi, Experimental investigation on 3D laser forming of metal sheet, in Proceeding of, Trans Tech Publ, pp. 568–572
Kim J, Na SJ (2009) 3D laser-forming strategies for sheet metal by geometrical information. Optics & Laser Technology 41(6):843–852
Gollo MH, Nadi G, Mehdi M, Abbaszadeh M (2015) Experimental and numerical study of spiral scan paths on cap laser forming. Journal of Laser Applications 27(1):012002
Shekhar Chakraborty S, Racherla V, Kumar Nath A (2012) Parametric study on bending and thickening in laser forming of a bowl shaped surface. Opt Lasers Eng 50(11):1548–1558
Hsieh H-S, Lin J (2004) Laser-induced vibration during pulsed laser forming. Optics & Laser Technology 36(6):431–439
J. R. Davis 1994 Stainless steels: ASM international
Sathiya P, Aravindan S, Haq AN (2005) Mechanical and metallurgical properties of friction welded AISI 304 austenitic stainless steel. Int J Adv Manuf Technol 26(5–6):505–511
W.-W. Yu, R. A. LaBoube 2010 Cold-formed steel design: John Wiley & Sons
El Wahabi M, Cabrera J, Prado J (2003) Hot working of two AISI 304 steels: a comparative study. Mater Sci Eng A 343(1):116–125
E. Said 2016 On the deflection of S32003 stainless steel beams
A. S. M. Handbook 1990 ASM international, Materials Park, OH, Vol. 2, pp. 152–77
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Tavakoli, A., Moslemi Naeini, H., Roohi, A.H. et al. Determining optimized radial scan path in 3D laser forming of steelAISI 304 plates to produce bowl shapes. Int J Adv Manuf Technol 91, 3457–3465 (2017). https://doi.org/10.1007/s00170-017-9985-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-9985-x