Abstract
The article covers a mathematical model of a temperature distribution in the three-layer metal composite structures when grinding their working layers. The computer program TEMSS, created on the basis of thermal models, allows calculation of all the characteristics of the temperature distribution in the layers of the metal composite structure, depending on the system structure, material properties of its layers, grinding and machining conditions, and duration. The work establishes the adequacy of the developed mathematical model of the temperature distribution when grinding the metal composite systems. The article covers the analysis of standard metal composite systems with Loctite, Chester molecular, and Devcon polymers on the basis of the temperature distribution model, revealing the influence of lamination on the nature of the temperature distribution. Critical temperatures are defined that determine the occurrence of thermal grinding defects in the metal composite system, including their dependencies on processing conditions and the system structure. Thus, it is found that when grinding a working steel layer of the composite system using the standard grinding conditions recommended in the reference handbooks for steel workpieces, the temperature in the working and polymer-composite layers, as a rule, exceeds the threshold values for these materials.
Article PDF
Similar content being viewed by others
Explore related subjects
Discover the latest articles, news and stories from top researchers in related subjects.Avoid common mistakes on your manuscript.
References
Skorokhod VV (2003) Layered composites: structural classification, thermophysical and mechanical properties. Powder Metall Met Ceram 42(9–10):437–446. doi:10.1023/B:PMMC.0000013215.36378.50
Tan CK, Blackwood DJ (2003) Corrosion protection by multilayered conducting polymer coatings. Corros Sci 45(3):545–557. doi:10.1016/S0010-938X(02)00144-0
Kryachek VM (2005) Friction composites: traditions and new solutions (review). Part 2. Composite materials. Powder Metall Met Ceram 44(1–2):5–6. doi:10.1007/s11106-005-0050-1
Shen YL, Suresh S (1996) Steady-state creep of metal-ceramic multilayered materials. Acta Mater 44(4):1337–1348. doi:10.1016/1359-6454(95)00294-4
Kruchinin SV, Lipatov AV, Ovcharenko LV, Fetkulin MM (2002) Metal polymer composite materials for the repair and restoration of engineering equipment. Remont Vosstan Moderniz 1:37–41
Shmidt IV, Dyakonov AA (2014) Modeling of stressed state during the processing of laminated surfaces. Lecture Notes Eng Comput Sci 2:914–917
Yoo SY, Kim CH, Kweon JH, Choi JH (2016) The structural analysis and strength evaluation of the rivet nut joint for composite repair. Comp Struct 136:662–668. doi:10.1016/j.compstruct.2015.11.012
Goncharov AB (1999) Application of advanced technologies with the use of polymer composite materials at the “Mosintrast” company. Svarochn Proizv 10:7–24
Malcolm J (2009) To replace or to wrap—the standardisation of composite repair. Reinf Plast 53(7):42–44. doi:10.1016/S0034-3617(09)70288-7
Rudawska A (2012) Bonded joints strength of aramid-epoxy and graphite-epoxy composites. In: ECCM 2012 - Composites at Venice, Proceedings of the 15th European Conference on Composite Materials
Raykhere SL, Kumar P, Singh RK, Parameswaran V (2010) Dynamic shear strength of adhesive joints made of metallic and composite adherents. Mater Des 31(4):2102–2109. doi:10.1016/j.matdes.2009.10.043
Mirman IB (1991) Effects of peeling stresses in bimaterial assembly. J Electron Packag, Trans ASME 113(4):431–433. doi:10.1115/1.2905433
Pashnyov VA, Pimenov DY (2015) Stress analysis of a three-layer metal composite system of bearing assemblies during grinding. Mech Compos Mater 51(1):109–128. doi:10.1007/s11029-015-9478-7
Pashnyov VA (2005) Increased effectiveness of grinding of the 3-layer metal composite systems. Abstract of thesis of Ph.D. in Engineering: 05.02.08. Chelyabinsk
Koshin AA, Pashnyov VA (2004) Features of grinding of three-layer metal-composite systems. Abrasive production Coll works, Izdat. YuUrGU, Chelyabinsk, pp 79–84
Handbook of Composites (1988) Vol. 2. Lubin G, editor. Transl. from English, Geller AB et al.; Ed. B. Geller, Мoscow: Mashinostroenie
Handbook of Metals (1976) Vol. 2. Rachschtadt AG, Brostrom VA, editors, Мoscow: Mashinostroenie
Davis LC, Artz BE (1995) Thermal conductivity of metal-matrix composites. J Appl Phys 77(10):4954–4960. doi:10.1063/1.359302
Hasselman DPH, Johnson LF (1987) Effective thermal conductivity of composites with interfacial thermal barrier resistance. J Compos Mater 21(6):508–515. doi:10.1177/002199838702100602
Liu M (2012) Surface quality prediction in precision cylindrical grinding of YG3 cemented carbide based on improved ANFIS. Zhongguo Jixie Gongcheng/China Mech Eng 23(9):1070–1074. doi:10.3969/j.issn.1004-132X.2012.09.014
Krivov GA, Lupkin BV (1995) Machining of polymer-composite materials. Compos Manuf Technol 1:155–218
Ren X, Liu Z (2016) Influence of cutting parameters on work hardening behavior of surface layer during turning superalloy Inconel 718. Int J Adv Manufact Technol 86(5–8):2319–2327. doi:10.1007/s00170-016-8350-9
Suresh P, Marimuthu K, Ranganathan S (2013) Determination of optimum parameters in turning of aluminium hybrid composites. Int Rev Mech Eng 7(1):115–125
Denkena B, Köhler J, Hahmann D (2012) Grinding of steel-ceramic-composites. Int J Abrasive Technol 5(2):175–186. doi:10.1504/IJAT.2012.048546
Biermann D, Feldhoff M (2012) Abrasive points for drill grinding of carbon fibre reinforced thermoset. CIRP Ann Manuf Technol 61:299–302. doi:10.1016/j.cirp.2012.03.096
Yuan HP, Gao H, Liang YD (2010) Fabrication of a new-type electroplated wheel with controlled abrasive cluster and its application in dry grinding of CFRP. Int J Abras Technol 3(4):299–315. doi:10.1504/IJAT.2010.036963
Sasahara H, Kikuma T, Koyasu R, Yao Y (2014) Surface grinding of carbon fiber reinforced plastic (CFRP) with an internal coolant supplied through grinding wheel. Prec Eng 38:775–782. doi:10.1016/j.precisioneng.2014.04.005
Shmidt IV, D’yakonov AA (2014) Thermal behavior in the grinding of laminar systems. Rus Eng Res 34(12):817–821. doi:10.3103/S1068798X14120223
Malkin S, Guo C (2007) Thermal analysis of grinding. CIRP Ann Manuf Technol 56(2):760–782. doi:10.1016/j.cirp.2007.10.005
Jiang J, Ge P, Sun S, Wang D, Wang Y, Yang Y (2016) From the microscopic interaction mechanism to the grinding temperature field: an integrated modeling on the grinding process. Int J Mach Tools Manuf 110:27–42. doi:10.1016/j.ijmachtools.2016.08.004
Korchak SN (1971) Theory of impact of the processing factors on the increase of effectiveness in grinding the steel parts. Thesis of Doctor of Engineering: 05.02.08. Chelyabinsk
Efremov VD, Zheludkevich MS, German ML (2000) Computer thermal model for hardening grinding. J Eng Phys Thermophys 73(2):428–435. doi:10.1007/BF02681753
Skuratov DL, Ratis YL, Selezneva IA, Pérez J, Córdoba PF, Urchueguıa JF (2007) Mathematical modelling and analytical solution for workpiece temperature in grinding. Appl Math Model 31:1039–1047. doi:10.1016/j.apm.2006.03.023
Li CH, Li JY, Wang S, Zhang Q (2013) Modeling and numerical simulation of the grinding temperature field with nanoparticle jet of MQL. Advances in Mechanical Engineering Article ID 986984, 9 pages. doi:10.1155/2013/986984
Shmidt IV, Dyakonov AA (2016) Numerical solution of the thermophysical task of grinding of the laminated system consisting of polymer-composite materials. Procedia Eng 150:980–986. doi:10.1016/j.proeng.2016.07.074
Ostrovskiy VI (1981) Theory of the grinding process. Publ. House of the Leningrad University, Leningrad
Reznikov AN (1981) Thermal physics of material machining processes. Mashinostroenie, Мoscow
Yakimov AV, Kazimirchik YuA, Sipaylov VA (1964) Studies of temperatures in the grinding zone. Vestnik Mashinostroeniya 8
Koshin AA (1971) Studies of functional relations between limiting conditions and thermal criteria of diamond abrasive treatment. Abstract of thesis of Ph.D. in Engineering: Chelyabinsk. ChPI
Gallagher R (1975) Finite element analysis fundamentals. Prentice Hall, Englewood Cliffs, NJ
Hufenbach W, Gruber B, Gottwald R, Lepper M, Zhou B (2010) Analytical and experimental analysis of stress concentration in notched multilayer composites with finite outer boundaries. Mech Compos Mater 46(5):531–538. doi:10.1007/s11029-010-9169-3
Roékowicz M, Smal T (2011) Durability of Belzona 1111 and Belzona 1812 adhesive composites. Polimery/Polymers 56(6):471–477
(1967) Machine-building standards of cutting modes for technical standardization of works on grinding lapping and finishing machines. Moscow: NIItruda
Tulinov AB, Goncharov AB (2003) New composite materials for the assembly and repair work. Sbor Mashinostr Priborostr 7:26–28
Author information
Authors and Affiliations
Corresponding author
Ethics declarations
Funding
The research was carried out within the South Ural State University Project 5-100 from 2016 to 2020 aimed to increase the competitiveness of leading Russian universities among the world research and educational centers. The work was supported by Act 211 Government of the Russian Federation, contract № 02.A03.21.0011.
Rights and permissions
Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made.
About this article
Cite this article
Pashnyov, V.A., Pimenov, D.Y., Erdakov, I.N. et al. Modeling and analysis of temperature distribution in the multilayer metal composite structures in grinding. Int J Adv Manuf Technol 91, 4055–4068 (2017). https://doi.org/10.1007/s00170-017-0036-4
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-017-0036-4