Abstract
In order to promote the integrated application of the Internet of Things and cloud platform computing technology in intelligent manufacturing system, a cloud platform of cutting database was established in this paper. With the help of multi-sensor and distributed storage technology, mathematics model and data mining algorithm, functions of fast accessing and storing cutting data, intelligent modeling and analysis, efficient mining and optimizing processing parameters can be realized in the system, solving the key problems of analyzing cutting force and controlling surface quality in turning difficult-to-cut materials. Data equipment and users in the system were connected as a whole through wireless network, which can provide intelligent service of data querying, modeling, and optimizing through the cloud server. The study made up for the drawbacks in current intelligent database system such as oversimplified platform architecture, low level of intelligence, and low utilization of historical data, providing an efficient method of managing and applying big data in cutting process for the production system.
Similar content being viewed by others
References
Sivieri A, Mottola L, Cugola G (2016) Building Internet of Things software with ELIoT. Comput Commun 89-90:141–153
Mell P, Grance T (2009) Perspectives on cloud computing and standards. National Institute of Standards and Technology (NIST), Information Technology Laboratory
Xu X (2012) From cloud computing to cloud manufacturing. Robot Comput Integr Manuf 28:75–86
Wang XV, Xu XW (2013) An interoperable solution for cloud manufacturing. Robot Comput Integr Manuf 29:232–247
Ramesh R, Jyothirmai S, Lavanya K (2013) Intelligent automation of design and manufacturing in machine tools using an open architecture motion controller. J Manuf Syst 32:248–259
Huang B, Li C, Yin C, Zhao X (2013) Cloud manufacturing service platform for small- and medium-sized enterprises. Int J Adv Manuf Technol 65:1261–1272
Wang L (2013) Machine availability monitoring and machining process planning towards cloud manufacturing. CIRP J Manuf Sci Technol 6:263–273
Tao F, Cheng Y, Xu LD, Lin Z, Li BH (2014) CCIoT-CMfg: cloud computing and internet of things-based cloud manufacturing service system. IEEE Transactions on Industrial Informatics 10(2):1435–1442
Liu C, Li Y, Shen W (2014) Integrated manufacturing process planning and control based on intelligent agents and multi-dimension features. Int J Adv Manuf Technol 75:1457–1471
Li J, Tao F, Cheng Y, Zhao L (2015) Big data in product lifecycle management. Int J Adv Manuf Technol 81:667–684
Gao R, Wang L, Teti R, Dornfeld D, Kumara S, Mori M, Helu M (2015) Cloud-enabled prognosis for manufacturing. CIRP Ann Manuf Technol 64:749–772
Yildiz AR (2013) Optimization of multi-pass turning operations using hybrid teaching learning-based approach. Int J Adv Manuf Technol 66:1319–1326
Frumusanu GR, Constantin IC, Marinescu V, Epureanu A (2013) Development of a stability intelligent control system for turning. Int J Adv Manuf Technol 64:643–657
Jafarian F, Amirabadi H, Fattahi M (2014) Improving surface integrity in finish machining of Inconel 718 alloy using intelligent systems. Int J Adv Manuf Technol 71:817–827
Yang F, Zhang Y, Qiao H (2015) Analysis of feature extracting ability for cutting state monitoring using deep belief networks. Procedia CIRP 31:29–34
Sortino M, Belfio S, Totis G, Di Gaspero L, Nali M (2015) An investigation on swarm intelligence methods for the optimization of complex part programsin CNC turning. Int J Adv Manuf Technol 80:657–672
Sadoyan H, Zakarian A, Mohanty P (2006) Data mining algorithm for manufacturing process control. Int J Adv Manuf Technol 28:342–350
Abu-Mahfouz I, Banerjee A (2014) Drill wear feature identification under varying cutting conditions using vibration and cutting force signals and data mining techniques. Procedia Computer Science 36:556–563
Denkena B, Schmidt J, Krüger M (2014) Data mining approach for knowledge-based process planning. Procedia Technology 15:406–415
Yong F, Binghui J, Guodong Y, Xiaolin J (2016) Prediction model of high-speed oblique cutting temperature based on LS-SVM. Int J Adv Manuf Technol 85:317–324
MANOCHA D, KARISHNAN S (1997) Algebraic pruning: a fast technique for curve and surface intersection. Comput Aided Geom Des 14:823–845
Goldman R (2009) An integrated introduction to computer graphics and geometric modeling. CRC Press, Boca Raton
Atabey F, Lazoglu I, Altintas Y (2003) Mechanics of boring processes-part I. Int J Mach Tools Manuf 43:463–476
Piatetsky-Shapiro G, Frawley WJ (1991) Knowledge discovery in databases. AAAI/MIT Press
Jain AK (2010) Data clustering: 50 years beyond K-means. Pattern Recogn Lett 31:651–666
Aflori C, Craus M (2007) Grid implementation of the Apriori algorithm. Adv Eng Softw 38:295–300
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Wang, Z., Jiao, L., Yan, P. et al. Research and development of intelligent cutting database cloud platform system. Int J Adv Manuf Technol 94, 3131–3143 (2018). https://doi.org/10.1007/s00170-016-9310-0
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s00170-016-9310-0