Skip to main content
Log in

Development of low-cost air-based hydraulic leakage detection system through real-time pressure decay data acquisition technology

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

It is preferable to detect the leakage status at the earliest phase in the manufacturing process, and then, further assembly of hydraulic components with leakage faults can be avoided. Integrating a USB-based microcontroller and a pressure transducer and also with environmental and safety considerations, this study developed a hydraulic leakage detection system by using air in lower-pressure operation ranges, through measuring pressure decay signals captured in real time. Pressure decay data were collected with the developed hydraulic leakage detection system, in which a hydraulic testing tube was installed in tight vs un-tight threading connections to simulate the leakage vs no leakage treatments at two different system pressure levels. Through statistical analysis, it was found that the developed prototype system can capture and visualize the pressure decay curve in real time, and two signals, the pressure drop from the test start to end point and the pressure drop rate in the testing period, can be used as featured characteristics to quickly detect hydraulic leakage components’ status.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price includes VAT (Finland)

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Colombo AF, Lee P, Karney BW (2009) A selective literature review of transient-based leak detection methods. J Hydro Environ Res 2:212–227

    Article  Google Scholar 

  2. Grace IN, Datta D, Tassou SA (2005) Sensitivity of refrigeration system performance to charge levels and parameters for on-line leak detection. Appl Therm Eng 25:557–566

    Article  Google Scholar 

  3. Karadirek IE, Kara S, Yilmaz G, Muhammetoglu A, Muhammetoglu H (2012) Implementation of hydraulic modelling for water-loss reduction through pressure management. Water Resour Manag 26:2555–2568

    Article  Google Scholar 

  4. Poulakis Z, Valougeorgis D, Papadimitriou C (2003) Leakage detection in water pipe networks using a Bayesian probabilistic framework. Probab Eng Mech 18(4):315–327

    Article  Google Scholar 

  5. Zeidouni M, Pooladi-Darvish M, Keith DW (2011) Leakage detection and characterization through pressure monitoring. Energy Procedia 4:3534–3541

    Article  Google Scholar 

  6. TM Electronics, Inc. (2008). Leak, flow and package testing 101. http://www.tmelectronics.com/userfiles/files/Leak-Flow-Testing-101-08232013.pdf

  7. Brunner AJ, Barbezat M (2006) Acoustic emission monitoring of leaks in pipes for transport of liquid and gaseous media: a model experiment. Adv Mater Res 13–14:351–356

    Article  Google Scholar 

  8. Liang W, Zhang L, Xu Q, Yan C (2013) Gas pipeline leakage detection based on acoustic technology. Eng Fail Anal 31:1–7

    Article  Google Scholar 

  9. Dudic S, Ignjatovic I, Šešlija D, Blagojevic V, Stojiljkovic M (2012) Leakage quantification of compressed air using ultrasound and infrared thermography. Measurement 45:1689–1694

    Article  Google Scholar 

  10. Zhao X, Zhang S, Zhou C, Hu Z, Li R, Jiang J (2015) Experimental study of hydraulic cylinder leakage and fault feature extraction based on wavelet packet analysis. Comput Fluids 106:33–40

    Article  Google Scholar 

  11. Sepasi M, Sassani F (2010) Online fault diagnosis of hydraulic systems using unscented Kalman filter. Int J Control Autom Syst 8:p149–p156

    Article  Google Scholar 

  12. Cincinnati Test Systems (2009) How to establish acceptable leak rate criteria for automated testing. http://www.cincinnati-test.com/images/AB120%20Setting%20Acceptable%20Test%20Criteria.pdf

  13. American Society for Testing and Materials (2005) Standard Test Method for Pneumatic Leak Testing of Tubes (ASTM A 1047/A 1075M-05)

  14. NoShok, Inc. (2015) NoShok transmitter transducers wiring diagrams and electronic connections for 200 series. https://www.instrumart.com/assets/NoShok-200-Series-Data-Sheet.pdf

  15. Humphrey 320/420 series solenoid valves. https://www.humphrey-products.com/sc/lp/shared/320tech06.pdf

  16. Measurement Computing (2012) Users’ guide for USB-1608G series. http://www.mccdaq.com/PDFs/manuals/USB-1608G-Series.pdf

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Julie Zhang.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Zhang, J., Shang, J., Pramanik, N. et al. Development of low-cost air-based hydraulic leakage detection system through real-time pressure decay data acquisition technology. Int J Adv Manuf Technol 87, 3473–3483 (2016). https://doi.org/10.1007/s00170-016-8639-8

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-016-8639-8

Keywords

Navigation