Skip to main content
SpringerLink
Log in

Laser-assisted milling of Ti-6Al-4V with the consideration of surface integrity

  • ORIGINAL ARTICLE
  • Published:
The International Journal of Advanced Manufacturing Technology Aims and scope Submit manuscript

Abstract

Titanium alloys are well known for their excellent strength-to-weight ratio and corrosion resistance and is highly sought after in the aerospace industry. This study focused on experimental evaluation of laser-assisted milling (LAML) of a Ti-6AL-4V (Ti-64) workpiece which uses localized preheating of the workpiece by a laser and characterizes the improvements to the machinability of these metals. The benefits of LAML are quantified for laser parameters which are shown to maintain final surface integrity of the heat-treatable workpiece after the machining process. Laser parameters are determined based on temperature prediction modeling. Laser preheating is shown to reduce cutting force during the machining process. Machinability improvement is characterized through inspection of flank wear on the cutting tool using LAML and traditional machining methods and comparing total tool life. Systematic characterization of samples is performed using hardness measurements, scanning electron microscopy (SEM), and X-ray diffraction (XRD) to ensure that material properties remained unaltered as a result of laser preheating. An economic analysis is performed for LAML to characterize the improvement obtained despite the additional costs associated with the laser equipment.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Log in via an institution

Subscribe and save

Springer+ Basic
$34.99 /Month
  • Get 10 units per month
  • Download Article/Chapter or eBook
  • 1 Unit = 1 Article or 1 Chapter
  • Cancel anytime
Subscribe now

Buy Now

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Similar content being viewed by others

References

  1. Boyer, R., Gerhard, W., Collings, E. W., (1994) Material properties handbook titanium alloys, ASM International, pp. 483–485

  2. Donachie M. J. (1988) Titanium: a technical guide, ASM International, Second Ed., pp. 6–11

  3. Komanduri, R. and Reed, Jr., W.R. (1983) Cutting insert with means for simultaneously removing a plurality of chips”, US patent US4552492 A

  4. Kuljanic E, Fioretti M, Beltrame L, Miani F (1998) Milling titanium compressor blades with PCD cutter. CIRP Ann Manuf Technol 47(1):61–64

    Article  Google Scholar 

  5. Jawaid A, Sharif S, Koksal S (2000) Evaluation of wear mechanisms of coated carbide tools when face milling titanium alloy. J Mater Process Technol 99(1–3):266–274

    Article  Google Scholar 

  6. López de Lacalle LN, Pérez-Bilbatua J, Sánchez JA, Llorente JI, Gutiérrez A, Albóniga J (2000) Using high pressure coolant in the drilling and turning of low machinability alloys. Int J Adv Manuf Technol 16(2):85–91

    Article  Google Scholar 

  7. Ezugwu EO, Da Silva RB, Bonney J, Machado ÁR (2005) Evaluation of the performance of CBN tools when turning Ti–6Al–4V alloy with high pressure coolant supplies. Int J Mach Tools Manuf 45(9):1009–1014

    Article  Google Scholar 

  8. Rahim, E. A., Sasahara, H. (2010) “High speed MQL drilling of titanium alloy using synthetic ester and palm oil,” Proceedings of the 36th International MATADOR Conference, pp. 193–196

  9. Sun J, Wong YS, Rahman M, Wang ZG, Neo KS, Tan CH, Onozuka H (2006) Effects of coolant supply methods and cutting conditions on tool life in end milling titanium alloy. Mach Sci Technol Int J 10(3):355–370

    Article  Google Scholar 

  10. Su Y, He N, Li L, Li XL (2006) An experimental investigation of effects of cooling/lubrication conditions on tool wear in high-speed end milling of Ti-6Al-4V. Wear 261(7–8):760–766

    Article  Google Scholar 

  11. Steen W (2003) Laser material processing, 3rd edn. Springer, New York

    Book  Google Scholar 

  12. Sun S, Brandt M, Dargusch MS (2010) Thermally enhanced machining of hard-to-machine materials—a review. Int J Mach Tools Manuf 50(8):663–680

    Article  Google Scholar 

  13. Ding H, Shin YC (2013) Improvement of machinability of Waspaloy via laser-assisted machining. Int J Adv Manuf Technol 17(2):246–269

    Google Scholar 

  14. Dandekar C, Shin YC (2010) Laser-assisted machining of a fiber reinforced Al–2 % Cu metal matrix composite. Trans ASME J Manuf Sci Eng 132(6):061004

    Article  Google Scholar 

  15. Dandekar C, Shin YC (2010) Machinability improvement of Ti6Al4V alloy via LAM and hybrid machining. Int J Mach Tools Manuf 50(2):174–182

    Article  Google Scholar 

  16. Rahman Rashid RA, Sun S, Wang G, Dargusch MS (2012) The effect of laser power on the machinability of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy during laser assisted machining. Int J Mach Tools Manuf 63:41–43

    Article  Google Scholar 

  17. Anderson M, Patwa R, Shin YC (2006) Laser-assisted machining of Inconel 718 with an economic analysis. Int J Mach Tools Manuf 46:1879–1891

    Article  Google Scholar 

  18. Shelton JA, Shin YC (2010) Laser-assisted micro-milling of difficult-to-machine materials in a side cutting configuration. J Micromech Microeng 20(7):075012

    Article  Google Scholar 

  19. Shelton JA, Shin YC (2010) Experimental evaluation of laser-assisted micro-milling in a slotting configuration. Trans ASME J Manuf Sci Eng 132(2):021008

    Article  Google Scholar 

  20. Wiedenmann R, Langhorst M, Zaeh MF (2011) Computerized optimization of the process parameters in laser-assisted milling. Lasers Manuf 2011 Proc Sixth Int WLT Conf Lasers Manuf 12(A):607–616

    Google Scholar 

  21. Wiedenmann R, Liebl S, Zaeh MF (2012) Influencing factors and workpiece’s microstructure in laser-assisted milling of titanium. Laser Ass Net Shape Eng 7 39:265–276

    Google Scholar 

  22. Brecher C, Rosen C, Emonts M (2010) Laser-assisted milling of advanced materials. Phys Procedia 5(B):259–272

    Article  Google Scholar 

  23. Ding H, Shen N, Shin YC (2012) Thermal and mechanical modeling analysis of laser-assisted micro-milling of difficult-to-machine alloys. Micro-Manuf Process 212(3):601–613

    Google Scholar 

  24. Sun S, Brandt M, Barnes JE, Dargusch MS (2011) Experimental investigation of cutting forces and tool wear during laser-assisted milling of Ti-6Al-4V alloy. Proc Inst Mech Eng B J Eng Manuf 225(9):1512–1527

    Article  Google Scholar 

  25. Tian Y, Wu BX, Shin YC (2008) Laser-assisted milling of silicon nitride and Inconel 718. ASME J Manuf Sci Eng 130(3):031013

    Article  Google Scholar 

  26. Touloukian YS (1970) Thermophysical Properties Research Center, Purdue University, thermophysical properties of matter; [the TPRC data series; a comprehensive compilation of data]. IFI/Plenum, New York

    Google Scholar 

  27. Yang J, Sun S, Brandt M, Yan W (2010) Experimental investigation and 3D finite element prediction of the heat affected zone during laser assisted machining of Ti6Al4V alloy. J Mater Process Technol 210(15):2215–2222

    Article  Google Scholar 

  28. Chandler HW (1989) Machining of Reactive Metals. ASM Handbook - Machining 10:844–857

  29. Hahn JD, Shin YC, Krane MJM (2007) Laser transformation hardening of Ti-6Al-4V in solid state with accompanying kinetic model. Surf Eng 23(2):78–82

    Article  Google Scholar 

  30. Vreeling JA, Ocelík V, De Hosson JTM (2002) Ti–6Al–4V strengthened by laser melt injection of WCp particles. Acta Mater 50(19):4913–4924

    Article  Google Scholar 

  31. Güleryüz H, Çimenoğlu H (2004) Effect of thermal oxidation on corrosion and corrosion–wear behaviour of a Ti-6Al-4V alloy. Biomaterials 25(16):3325–3333

    Article  Google Scholar 

  32. da Silva SLR, Kerber LO, Amaral L, dos Santos CA (1999) X-ray diffraction measurements of plasma-nitrided Ti–6Al–4V. Surf Coat Technol 116–119:342–346

    Article  Google Scholar 

  33. Mantle AL, Aspinwall DK (2001) Surface integrity of a high speed milled gamma titanium aluminide. J Mater Process Technol 118:143–150

    Article  Google Scholar 

Download references

Author information

Authors and Affiliations

  1. Center for Laser Based Manufacturing, School of Mechanical Engineering, Purdue University, West Lafayette, IN, 47907, USA

    G. K. Hedberg & Y. C. Shin

  2. The Boeing Company, P.O. Box 3707, MC 5A-08, Seattle, WA, 98124-2207, USA

    L. Xu

Authors
  1. G. K. Hedberg
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Y. C. Shin
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. L. Xu
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Y. C. Shin.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Hedberg, G.K., Shin, Y.C. & Xu, L. Laser-assisted milling of Ti-6Al-4V with the consideration of surface integrity. Int J Adv Manuf Technol 79, 1645–1658 (2015). https://doi.org/10.1007/s00170-015-6942-4

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s00170-015-6942-4

Keywords

Search

Navigation